• Title/Summary/Keyword: azimuth angle

Search Result 300, Processing Time 0.022 seconds

Monopulse Slope Calibration in Frequency Agile Noncoherent Monopulse System (주파수 가변 비동기 모노펄스 시스템의 모노펄스 기울기 교정)

  • Kim, So-Su;Yeom, Kyung-Whan
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.18 no.11
    • /
    • pp.1299-1308
    • /
    • 2007
  • In this paper, we propose the calibration method of monopulse slope to minimize the variation of angle estimate in frequency agile noncoherent monopulse system. We analyze the monopulse slope characteristics of antenna and RF receiver including the phase and gain imbalances of each receiving channel and present the calibration method to minimize the phase and gain imbalances of RF receiver channels including antenna. In addition, we present the calibration method using channel switching to minimize the gain imbalance of IF receiver channels. The measured average monopulse slope within the frequency bandwidth is -0.96, the maximum variation of angle estimate is similar to theoretical value, $0.15^{\circ}$ at ${\pm}2^{\circ}$ azimuth and $0.03^{\circ}$ at $0^{\circ}$ azimuth.

Monopulse Secondary Surveillance Radar Antenna with Sum/Difference/SLS Channels (합/차/부엽 억제 채널을 갖는 모노펄스 보조 감시 레이더(용) 안테나)

  • Choi, Jong-Hwan;Chae, Hee-Duck;Park, Jong-Kuk;Na, Hyung-Gi
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.22 no.7
    • /
    • pp.720-728
    • /
    • 2011
  • In this paper, development of the monopulse secondary surveillance radar antenna which can be used for IFF system is presented. This antenna that is passive linear array is comprised of the row-feeder and several array-elements. The row-feeder provides sum, different and SLS(Sidelobe Supression) channels which are optimized the distribution of the power and phase ratio. The azimuthe sidelobe level of the sum channel beam pattern is -20 dBc or less. The SLS channel covers the sidelobe of the sum-chanel in the whole azimuth angle range. And the difference channel is used to perform the mono-pulse function, improves the detection accuracy in the azimuth direction. Meanwhile, the arrayelement makes shaped beam in the elevation angle, in order to eliminate the clutter and multipath effects from the ground. Performance of the antenna developed is verified by the measurement of S-parameters and far-field beam pattern, and satisfies all of the development specifications well.

Performance analysis of DoA estimation algorithm using a circular array antenna (원형 배열 안테나의 DoA 추정 알고리즘 성능 분석)

  • Lim, Seung-Gag;Kang, Dae-Soo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.9 no.2
    • /
    • pp.395-400
    • /
    • 2008
  • This paper relates to the performance analysis of DoA estimation algorithm in 2-dimensional circular array antenna for the receiving of GPS signal which is used for the performance improvement by elimination of jammer signal. By performing the spatial filtering after the DoA estimation in array antenna, the quality of receiving signal can improve by the nulling of jammer signal from the undesired direction and the forming of beam from the desired direction. In this paper, the MUSIC and MinNorm algorithm used for DoA estimation were applied after fixing the angle and power of jammer signal in 4 element and 7 element circular array antenna. In order to performance analysis, the estimation result and estimation error were computed by computer simulation. As a result, the MUSIC and MinNorm were fairly good in azimuth and elevation angle estimation of DoA in case of good signal to noise ratio and the MUSIC has better performance compared to MinNorm in case of poor signal to noise ratio.

Position Fixing Accuracy of TDOA Direction Finding Method (TDOA 방위탐지방식의 위치표정 정확도)

  • Lim, Joong-Soo;Chae, Gyoo-Soo
    • Journal of Digital Convergence
    • /
    • v.12 no.11
    • /
    • pp.373-378
    • /
    • 2014
  • The technology of direction finding is very important to make high position fixing accuracy. TDOA(time difference of arrival) direction finding technology is a high accuracy technology and is used in RF system from 1990. The principle of TDOA is to receive an emitter signal with two antennas, measure the time difference of received signal and then convert the time differences to azimuth angle. For high DF(direction finding) accuracy long basis line and high SNR at receiving system are needed. The DF accuracy and position fixing accuracy are simulated with different SNRs and antenna base lines. We obtain the DF accuracy of $0.51^{\circ}$ at $0^{\circ}$ incident azimuth angle in case of 50m base line and 40dB SNR.

A study on the daylight condition of the apartment houses - Focused on the comparative analysis of the daylight condition between the plank type and tower type apartment complex - (아파트 단지의 일조환경 실태 연구 - 판상형과 탑상형 아파트 단지의 일조상태 비교 분석을 중심으로 -)

  • Lee, Jang-Bum
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.8 no.1
    • /
    • pp.121-129
    • /
    • 2007
  • This study aims at analysing the daylight condition of the existing and the newly planned apartment complex due to the azimuth angle, and throughout that result, presenting the necessity of new concept of architectural law for apartment complex design in the matter of daylight condition. For this purpose selecting one apartment complex which showed typical shape of '=' or 'ㅁ', 3D daylight analysis was applied for the existing condition. And then after new complex was planned according to the architectural law, additional 3D analysis on the daylight with the various conditions were accomplished. This 3D analysis for daylight condition can give accurate results and design direction which are suitable for the new complex plan of apartment houses.

  • PDF

PROBABILITY DISTRIBUTION OF SURFACE WAVE SLOPE DERIVED USING SUN GLITTER IMAGES FROM GEOSTATIONARY METEROLOGICAL SATELLITE AND SURFACE VECTOR WINDS FROM SCATTEROMETERS

  • Ebuchi, Naoto;Kizu, Shoichi
    • Proceedings of the KSRS Conference
    • /
    • 2002.10a
    • /
    • pp.615-620
    • /
    • 2002
  • Probability distribution of the sea surface slope is estimated using sun glitter images derived from visible radiometer on Geostationary Meteorological Satellite (GMS) and surface vector winds observed by spaceborne scatterometers. The brightness of the visible images is converted to the probability of wave surfaces which reflect the sunlight toward GMS in grids of 0.25 deg $\times$ 0.25 deg. Slope and azimuth angle required for the reflection of the sun's ray toward GMS are calculated for each grid from the geometry of GMS observation and location of the sun. The GMS images are then collocated with surface wind data observed by three scatterometers. Using the collocated data set of about 30 million points obtained in a period of 4 years from 1995 to 1999, probability distribution function of the surface slope is estimated as a function of wind speed and azimuth angle relative to the wind direction. Results are compared with those of Cox and Munk (1954a, b). Surface slope estimated by the present method shows narrower distribution and much less directivity relative to the wind direction than that reported by Cox and Munk. It is expected that their data were obtained under conditions of growing wind waves. In general, wind waves are not always developing, and slope distribution might differ from the results of Cox and Munk. Most of our data are obtained in the subtropical seas under clear-sky conditions. This difference of the conditions may be the reason for the difference of slope distribution.

  • PDF

SPECIAL CONSIDERATION ON THE RADARSAT REPEAT-PASS SAR INTERFEROMETRY

  • Kim, Sang-Wan;Won, Joong-Sun;Moon, Wooil-M.
    • Proceedings of the KSRS Conference
    • /
    • 1999.11a
    • /
    • pp.474-478
    • /
    • 1999
  • SAR interferometry (InSAR) using the space-borne Synthetic Aperture Radar (SAR) have recently become one of the most effective tools monitoring surface changes caused by landslides, earthquakes, subsidences or volcanic eruption. This study focuses on examining the feasibility of InSAR using the RADARSAT data. Although the RABARSAT SAR with its high resolution and variable incidence angle has several advantages for repeat-pass InSAR, it has two key limitations: first, the orbit is not precisely known; and second, RADARSAT's 24-day repeat pass interval is not very favourable for retaining useful coherence. In this study, two pairs of RADARSAT data in the Nahanni area, NWT, Canada have been tested. We will discuss about the special consideration required on the interferometric processing steps specifically for RADARSAT data including image co-registration, spectral filtering in both azimuth and range, estimation of the interferometric baseline, and correction of the interferogram with respect to the "flat earth" phase contribution. Preliminary results can be summarized as: i) the properly designed azimuth filter based upon the antenna characteristic improves coherence considerably if difference in Doppler centroid of the two images is relatively large; ii) the co-registration process combined by fringe spectrum and amplitude cross-correlation techniques results in optimal matching; iii) the baseline is not always possible to be estimated from the definitive orbit information.

  • PDF

Frequency determination for beam command in rotating phase and frequency scan radar systems (회전 위상-주파수 주사 레이다 시스템의 빔 명령을 위한 주파수 결정)

  • 이민준;박정순;송익호;김광순;장태주
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.23 no.5
    • /
    • pp.1319-1324
    • /
    • 1998
  • The phase and frequency commands of a ratating radar system that utilizes frequency scanning to steer the beam in the azimuth direction and phase shifters in the elevation direction are derived in terms of the angles of the groung based coordinate system. The antenna type considered is slotted arrays that are easy to construct at such high microwave frequency as the X band. The frequency that has non-linear characteristics as a functio ofthe elevation angle is plotted and the derived frequency equation is aproximated to be a simple form to reduce the calculation time for real time multi-function radar systems. It is shown that the approximated frequency command is in good agreement with the exact one if the range of azimuth scanning is limited by ${\pm}10^{\circ}$.

  • PDF

Development of Auto-Tuning Geomagnetic Compass (자동 자기 왜곡보정 방위센서 개발)

  • Kim, Sang-Cheol;Lee, Yong-Beom;Han, Kil-Su;Im, Dong-Hyeok;Choi, Hong-Gi;Park, Woo-Pung;Lee, Woon-Yong
    • Journal of Biosystems Engineering
    • /
    • v.33 no.1
    • /
    • pp.58-62
    • /
    • 2008
  • The need for position information in agriculture is gradually increasing for precise control farm vehicle and effective manage farm land. Though geomagnetic sensor has a lot of merits in estimating heading angle of vehicle because of low costs and sensing ability of magnetic north, it is easy that sensor outputs are distorted in electro magnetic field environment. This study was conducted to develop geomagnetic compass which could be available in measuring relative position from reference point correcting output distorted by external electro magnetic field in a small scale field. Magnetic inducing sensor (PNI's Vector2X) which wound enamel coated copper coil on ferrite core in order to measure and correct earth magnetic field. Magnetic azimuth was corrected using the algorithm which estimated amount of magnetic distortion from the difference between each outputs of magnetic sensors that located on the cross shaped base. Developed auto-tuning magnetic sensor was showed less then 5% as bearing accuracy in the strong magnetic field.

Simple closed-form solution for a single source estimation in mixed far-field and near-field conditions (원근 혼합환경에서 간단한 닫힌 형식을 이용한 단일 음원 위치 추정 기법)

  • Jung, Tae-Jin;Lee, KyunKyung
    • The Journal of the Acoustical Society of Korea
    • /
    • v.35 no.1
    • /
    • pp.35-41
    • /
    • 2016
  • Based on correlation and least square method, a closed-form algorithm for estimating the location of mixed far-field and near-field source is presented using the Uniform Circular Array (UCA). Recently, for a homogeneous circular arrangement case, a correlation based closed-form algorithm is proposed to estimate 2-D angle (azimuth, elevation) and the extended algorithm is proposed to 3-D location (azimuth, elevation, range). These algorithms assume the far-field source or near-field source only. Therefore, for mixed source localization, the proposed algorithm estimates source location with the assumption of far-field source, and then estimates the range to distinguish the far-field from the near-field source. For both cases, numerical experiments have been performed, which confirmed the validity of the proposed algorithm.