• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.76-80
• /
• 2017

With the fast growing popularity of small UAVs (Unmanned Aerial Vehicles), recent UAV systems have been designed and utilized for the various field with their own specific purposes. UAVs are opening up many new opportunities in the fields of electronics, sensors, camera, and software for pilots. Increase in awareness and mission capabilities of UAVs are driving innovations and new applications driven with the help of low cost and its capability in undertaking high threat task. In particular, small unmanned aerial vehicles should fly in environments with high probability of unexpected sudden change or obstacle appearance in low altitude situations. In this paper, current researches regarding techniques of autonomous flight of smal UAV systems are introduced and we propose a draft idea for planning paths for small unmanned aerial vehicles in adversarial environments to arrive at the given target safely with low cost sensors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.707-714
• /
• 2016

Active driving safety systems for vehicle, such as the front collision avoidance, lane departure warning, and lane change assistance, have been popular to be adopted to the compact car. For improving performance and competitive cost, FMCW radar has been researched to adopt a phased array or a multi-beam antenna, and to integrate the front and the side radar. In this paper we propose several efficient methods to implement the signal processing module of FMCW radar system using low cost DSP. The pulse width modulation (PWM) based analog conversion, the approximation of time-eating functions, and the adoption of vector-based computation, etc, are proposed and implemented. The implemented signal processing board shows the real-time performance of 1.4ms pulse repetition interval (PRI) with 1024pt-FFT. In real road we verify the radar performance under real-time constraints of 10Hz update time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8C
• /
• pp.667-679
• /
• 2010

The use of femtocells in buildings and homes has been widely studied as a means to enlarge the cell coverage and increase the network capacity of mobile communication systems. Femtocells for Mobile WiMAX (M-WiMAX) using time division duplexing (TDD) requires frame synchronization with neighboring base stations to avoid interference between uplink and downlink signals. In this paper, we propose a new frame synchronization method for femtocell using IEEE 802.11 based wireless backhaul, which transfers the time information of mobile network to femtocells via the beacon signal provided by IEEE 802.11. Also, in order to reduce timing error of the proposed method, we modify the collision avoidance scheme in the transmitter of IEEE 802.11 and apply a timing estimation technique designed in the sense of least squares to the receiver of IEEE 802.11. Through computer simulations using the proposed scheme, we evaluate the performance of frame synchronization for femtocells and show that the recovered timing information satisfies the timing specification defined by M-WiMAX standard.

• Safety and Health at Work
• /
• v.10 no.4
• /
• pp.461-469
• /
• 2019

Background: Collisions involving workers and mobile machines continue to be a major concern in underground coal mines. Over the last 30 years, these collisions have resulted in numerous injuries and fatalities. Recently, the Mine Safety and Health Administration (MSHA) proposed a rule that would require mines to equip mobile machines with proximity detection systems (PDSs) (systems designed for automated collision avoidance). Even though this regulation has not been enacted, some mines have installed PDSs on their scoops and hauling machines. However, early implementation of PDSs has introduced a variety of safety concerns. Past findings show that workers' trust can affect technology integration and influence unsafe use of automated technologies. Methods: Using a mixed-methods approach, the present study explores the effect that factors such as mine of employment, age, experience, and system type have on workers' trust in PDSs for mobile machines. The study also explores how workers are trained on PDSs and how this training influences trust. Results: The study resulted in three major findings. First, the mine of employment had a significant influence on workers' trust in mobile PDSs. Second, hands-on and classroom training was the most common types of training. Finally, over 70% of workers are trained on the system by the mine compared with 36% trained by the system manufacturer. Conclusion: The influence of workers' mine of employment on trust in PDSs may indicate that practitioners and researchers may need to give the organizational and physical characteristics of each mine careful consideration to ensure safe integration of automated systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.549-559
• /
• 2015

In this paper, an efficient dynamic reactive motion planning method for an autonomous vehicle in a dynamic environment is proposed. The purpose of the proposed method is to improve the robustness of autonomous robot motion planning capabilities within dynamic, uncertain environments by integrating a virtual plane-based reactive motion planning technique with a sensor fusion-based obstacle detection approach. The dynamic reactive motion planning method assumes a local observer in the virtual plane, which allows the effective transformation of complex dynamic planning problems into simple stationary ones proving the speed and orientation information between the robot and obstacles. In addition, the sensor fusion-based obstacle detection technique allows the pose estimation of moving obstacles using a Kinect sensor and sonar sensors, thus improving the accuracy and robustness of the reactive motion planning approach. The performance of the proposed method was demonstrated through not only simulation studies but also field experiments using multiple moving obstacles in hostile dynamic environments.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.408-414
• /
• 2019

We developed a surveillance tool for collision avoidance of unmanned aerial vehicles (UAVs) in urban areas. In our tool, users can visualize the safety distance on the actual 3D map of urban area. The estimated positions of UAVs are assumed to be obtained based on the long-term evolution (LTE) signals. The safety distance is defined to include two or more signals with bias. The safety distance calculation method used in this paper enables simulation similar to the actual urban areas where signals are frequently biased due to multipath. In the simulation, the parameters were set based on the measured values, and the change of the safety distance according to the number of faulty signals was simulated. As a result, increasing the number of faulty signals led to a longer safety distance as expected.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.445-450
• /
• 2018

AIS is the most important navigation equipment for the identification of other ships, etc. However, the AIS overload problem has been raised recently due to an increase in AIS equipped vessels. The government is planning to introduce the wireless LTE network at 100 km offshore as part of the SMART-Navigation project. Continuous development and dissemination of the services available through such platforms will be necessary to achieve major goals such as marine accident prevention and environmental protection. In this study, we applied a WAVE communication system, which could be the basis for the development of such services. As a result, reliable data transmission was confirmed for a range of communication of approx. 5 miles, although the service was limited to 1 km in road traffic. Therefore, it is expected that WAVE communication technology will be used to prevent marine accidents through such efforts as collision avoidance and the transfer of marine safety information between ships.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.7
• /
• pp.529-536
• /
• 2020

Reaction Control System of the third stage of the Korean Space Launch Vehicle II conducts roll control and 3 axis control throughout third stage engine start, satellite separation, and collision and contamination avoidance maneuver. Reaction control system consumes its propellant in each thruster operation. Hence, loading of proper amount of the propellant is important for mission success. It is needed to have a rough estimation method of propellant consumption during the flight. In this paper, we developed a energy equation using pressure and temperature data which are acquired in the on-board reaction control system. We constructed a test system which is similar with the on-board reaction control system to verify the energy equation. Test results using deionized water were compared with estimated propellant consumption. We also conducted an error analysis of the energy equation. We also presented the propellant consumption result of a system level operation test.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.3
• /
• pp.355-362
• /
• 2009

In this paper, we present a framework for managing group behaviors in multi-agent swarm systems. The framework explores the benefits by dynamic associations with the proposed artificial potential functions to realize complex swarming behaviors. A key development is the introduction of a set of flocking by dynamic association (DA) algorithms that effectively deal with a host of swarming issues such as cooperation for fast migration to a target, flexible and agile formation, and inter-agent collision avoidance. In particular, the DA algorithms employ a so-called systematic singular association (SSA) rule for fast migration to a target and compact formation through inter-agent interaction. The resulting algorithms enjoy two important interrelated benefits. First, the SSA rule greatly reduces time-consuming for migration and satisfies low possibility that agents may be lost. Secondly, the SSA is advantageous for practical implementations, since it considers for agents even the case that a target is blocked by obstacles. Extensive simulation presents to illustrate the viability and effectiveness of the proposed framework.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.1
• /
• pp.55-61
• /
• 2008

A real-time three-dimensional vision is a passive system, which would support various applications including collision avoidance, home networks. It is a good alternative of active systems, which are subject to interference in noisy environments. In this paper, we designed a SAD correlator with respect to resource usage for a real-time three-dimensional vision system. Regular structures, linear data flow and abundant parallelism make the correlation algorithm a good candidate for a reconfigurable hardware. We implemented two versions of SAD correlator in HDL and synthesized them to determine resource requirements and performance. From the experiment we show that the SAD correlator fits into reconfigurable hardware in marginal cost and can handle about 30 frames/sec with $640{\times}480$ images.