• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.248-257
• /
• 2006

There will come someday when UAUs can fly into the airspace of manned aircraft in the near future because of the increasing number of operational UAUs together with technologies development. Since pilots of UAVs are on the gound, the equipment for sensing and avoiding obstacles in front is indispensable. In this paper, we analyze functions and interfaces of TCAS II, a collision avoidance device for manned aircraft, then find out whether it is suitable for the collision avoidance device for UAV and problems associated with it, if any. It turns out to be that the onboard directional antenna of TCAS II does not provide a precise directional information, and that the TCAS II is not assumed to be installed alone, but used as supplementary with other device which provides the better precision.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.10 no.3
• /
• pp.210-217
• /
• 2010

This paper presents integrated path planning and collision avoidance for an omni-directional mobile robot. In this scheme, the autonomous mobile robot finds the shortest path by the descendent gradient of a navigation function to reach a goal. In doing so, the robot based on the proposed approach attempts to overcome some of the typical problems that may pose to the conventional robot navigation. In particular, this paper presents a set of analysis for an omni-directional mobile robot to avoid trapped situations for two representative scenarios: 1) Ushaped deep narrow obstacle and 2) narrow passage problem between two obstacles. The proposed navigation scheme eliminates the nonfeasible area for the two cases by the help of the descendent gradient of the navigation function and the characteristics of an omni-directional mobile robot. The simulation results show that the proposed navigation scheme can effectively construct a path-planning system in the capability of reaching a goal and avoiding obstacles despite possible trapped situations under uncertain world knowledge.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.4
• /
• pp.686-691
• /
• 2008

This paper proposes the concept of "virtual sensor data" and its application for real time obstacle avoidance. The virtual sensor data is virtual distance which takes care of the movement of the obstacle as well as that of the robot. In practical application, the virtual sensor data is calculated from the odometry data and the range sensor data. The virtual sensor data can be used in all the methods which use distance data for collision avoidance. Since the virtual sensor data considers the movement of the robot and the obstacle, the methods utilizing the virtual sensor data results in more smooth and safer collision-free motion.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.3
• /
• pp.433-438
• /
• 2013

Interference reduction method of vehicle collision avoidance sensor which is used for the low speed electric vehicle has been investigated. Various methods were attempted for the vehicle collision avoidance distance sensor, which received a transmitted signal from a front driving vehicle to measure the distance between two vehicles, to avoid interference by the own transmitter signal toward the rear following vehicle. In this study, -12dB of interference cancellation ratio was realized by using the phase cancellation method to the transmitted signal from the own vehicle. Proposed phase cancellation method is regarded to have the advantage of continuous monitoring in comparison to the conventional time sharing transmitting and receiving method.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.3
• /
• pp.313-320
• /
• 1999

The Lane-Curvature Method(LCM) presented in this paper is a new local obstacle avoidance method for indoor mobile robots. The method combines Curvature-Velocith Method(CVM) with a new directional method called the Lane Method. The Lane Method divides the environment into lanes taking the information on obstacles and desired heading of the robot into account ; then it chooses the best lane to follow to optimize travel along a desired heading. A local heading is then calculated for entering and following the best lane, and CVM uses this heading to determine the optimal translational and rotational velocity space methods, LCM yields safe collision-free motion as well as smooth motion taking the dynamics of the robot Xavier, show the efficiency of the proposed method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.6
• /
• pp.3000-3022
• /
• 2019

Full-duplex (FD) technologies enable wireless nodes to simultaneously transmit and receive signal using the same frequency-band. The FD modes could improve their physical layer throughputs. However, in the wireless ad hoc networks, the FD communications also produce new interference risks. On the one hand, the interference ranges (IRs) of the nodes are enlarged when they work in the FD mode. On the other hand, for each FD pair, the FD communication may cause the potential hidden terminal problems to appear around the both sides. In this paper, to avoid the interference risks, we first model the IR of each node when it works in the FD mode, and then analyze the conditions to be satisfied among the transmission ranges (TRs), carrier-sensing ranges (CSRs), and IRs of the FD pair. Furthermore, in the media access control (MAC) layer, we propose a specific method and protocol for collision avoidance. Based on the modified Omnet++ simulator, we conduct the simulations to validate and evaluate the proposed FD MAC protocol, showing that it can reduce the collisions effectively. When the hidden terminal problem is serious, compared with the existing typical FD MAC protocol, our protocol can increase the system throughput by 80%~90%.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.918-927
• /
• 2022

The purpose of this study was to investigate the causes of collisions by examining 668 cases of merchant ship collision accidents that occurred during the past 12 years (2010-2021) and analyzed them statistically. Further, the analysis results were applied to propose a human error prevention collision avoidance (HEPCA) model. The statistical annual report of the Korea Maritime Safety Tribunal (KMST) and the collision investigation report were investigated to collect data on the causes of collisions of merchant ships, and frequency analysis was performed using the statistical analysis tool, SPSS Statistics. In the first-stage analysis, the causes of collisions were analyzed targeting 668 merchant ship collision accidents, and in the second-stage analysis, the identified maximum frequency cause factors were analyzed in detail. The analysis results identified that 98 % of the cause of the collision was the human error of the navigator, and the highest frequency was in the order of neglect of look-out > violation of navigation regulations > improper maneuvering. The cause of the neglect of look-out was mainly neglecting continuous monitoring after the first recognition of the target ship. The HEPCA model for human error prevention was proposed by applying the analysis results to the collision case of the investigation report. The results of this study are expected to be used as educational materials at marine navigator educational institutions and in practice for avoiding collisions caused by human errors of navigators.

• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.427-432
• /
• 2006

The purpose of the present study was to investigate the effect of mariner's situation awareness(SA) training on navigation performance using a full mission ship-handling simulator. For this purpose, the mariners were trained in terms of various aspects of SA. Independent variables such as risk levels of ship-to-ship collision, navigational route types of 'target ship(TS)', and number of ships around the own ship(OS) were systematically varied, and dependent variables of closest point of approach(CPA) between TS and OS, number of collision, types of collision-avoidance strategy were measured The results can be summarized as followings. First, training on mariner's SA appeared to induce improved performances in various aspects of ship handling. Second, mariners in the routine navigation situation where TS had priority following maritime rules seemed to suffer to prepare collision avoidance when the TS altered its route. However, this tendency greatly reduced after the training These results suggest the benefit of mariner's SA training on maritime safety.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.103-111
• /
• 2021

The purpose of this study is to study a method for preventing collisions of multiple drones in controlled airspace. As a result of the study, it was proved that it is appropriate as a method to control drone collisions after setting accurate information on the ROI (Region of Interest) area estimated based on the expected drone path and time in the control system as a method to avoid drone collision. As a result of the empirical analysis, the diameter of the flight path of the operating drone should be selected to reduce the risk of collision, and the change in the departure time and operating speed of the operating drone did not act as an influencing factor in the collision. In addition, it has been demonstrated that providing flight priority is one of the appropriate methods as a countermeasure to avoid collisions. For collision avoidance methods, not only drone sensor-based collision avoidance, but also collision avoidance can be doubled by monitoring and predicting collisions in the control system and performing real-time control. This study is meaningful in that it provided an idea for a method for preventing collisions of multiple drones in controlled airspace and conducted practical tests. This helps to solve the problem of collisions that occur when multiple drones of different types are operating based on the control system. This study will contribute to the development of related industries by preventing accidents caused by drone collisions and providing a safe drone operation environment.

• Journal of Navigation and Port Research
• /
• v.27 no.6
• /
• pp.611-618
• /
• 2003

It can be said that the relationship between the maneuvering ability of operators and the navigational environment affects the safe degree of navigation in the collision avoidance situation. In order to reduce the occurrence probability of accident and to maintain the safety, it is necessary to clarify the relationship between human behavior and navigational environment. In this study, therefore, we analyzed and discussed the relationship between the maneuvering characteristics and the safety focused on human behavior as a fundamental factor of marine accidents using ship handling simulator and questionnaire. As a result, we concluded that navigational environment changes variously and the maneuvering ability of operators also varies with the navigational environment, and the ship handling characteristics strongly affect the occurrence probability of accident.