• The Korean Journal of Ceramics
• /
• v.6 no.3
• /
• pp.229-235
• /
• 2000

The spherical silica powder was synthesized by varying the kinds of solvent and mixing energy in emulsion method. The stirring speed varied from 500 to 1000 r.p.m. at 5$0^{\circ}C$ for 2h. Toluene in benzyl groups and a series of alkanes were used as dispersant. The average size of spherical silica particles decreased with increasing the stirring speed and the chain length o solvents used in this work. The average size was controlled in the range of 134~28$\mu\textrm{m}$ by selecting a proper solvent and stirring speed. The optimum processing parameters were described in details.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1463-1472
• /
• 2008

The present paper to relate with the maintenance of the high-speed vehicle, KTX and is to treat a reliability evaluation. The reliability of the high-speed vehicle while operating between-failure average mileage (MKBSF) and parts between-failure average mileage (MKBF), 1,000,000 per km service failure number of items and availability and per km evaluated a maintenance expense. The reliability evaluation results and 2007 year reliability management indexes compared in 2006 years and they improved, per km the maintenance expense compared at 2006 and 36.6% was decreased. Reliability management activity leads and availability of the high-speed vehicle, safety improves and with the fact that will be able to decrease the maintenance expense which is an economic scale of railroad service is expected.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.9
• /
• pp.36-46
• /
• 1994

A analog disturbance observer, which is suitable for servo motor drive, was employed to suppressi control of the impact drop disturbance. The main advantage of the observer is that a fast response disturbance estimation is obtained using the detected motor cuttent and speed. And the new M/T method for motor speed detection is proposed. The method should be able to reduce the detection dead time compared with the Ohmae's M/T method. Also, the low speed control of a servo motor using instantaneous speed detection method is described. To estimate the instantaneous speed from the average speed, the speed estimator of the first order is proposed. Actually we confirmed that these methods improve the speed control performance of the servo system with experiments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.657-662
• /
• 2004

This paper presented is a case study of a real compressor rotor of a refinery plant for high speed balancing of flexible rotor. The rotor was tested in the expert high-speed balancing facility established by KIMM at early 2004. The capability of the facility can reach 40000rpm in rotation speed and 8 ton in rotor weight for high-speed balancing. The facility performs multi-plane at-speed balancing using influence coefficient from the vibration data measured at two pedestals. The test rotor had exceeded permissible criteria of vibration at initial run. But by processing a low-speed balancing at 1000 rpm and six trial run trying to calculate influence coefficient of rotor to the range of operating speed, the final result of high-speed balancing revealed a remarkable reduce of vibration at pedestal of the rotor.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.3 no.1
• /
• pp.105-111
• /
• 2003

This paper is researching the storing of 40 different kinds of conditions. Such as, car speed, delay in starting time and the volume of cars in traffic. Through the use of a central nervous networking system or AI, using 10 different intersecting roads. We will improve the green traffic light. And allow more cars to easily flow through the intersections. Now days, with increasing many vehicles on restricted roads, the conventional traffic light creates prove startup-delay time and end-lag-time. The conventional traffic light loses the function of optimal cycle. And so, 30-45% of conventional traffic cycle is not matched to the present traffic cycle. In this paper proposes electro sensitive traffic light using fuzzy look up table method which will reduce the average vehicle waiting time and improve average vehicle speed. Computer simulation results prove that reducing the average vehicle waiting time which proposed considering passing vehicle length for optimal traffic cycle is better than fixed signal method which dosen't consider vehicle length.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.700-705
• /
• 2001

The paper presents a seam tracking controller of high speed rotating arc sensor developed by microprocessor based system. The seam tracking algorithm is based on the average current value at each interval region of four phase points on one rotating cycle. To remove the noise effect for the measured current, the area during one rotating cycle is separated into four regions of front, rear, left and right. The average values at each region are calculated, using the regional current values and a low pass filter incorporating the moving average and exponential smoothing methods is adopted.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.153-159
• /
• 2005

The purpose of this study was to investigate the Effective X-Factor in golf swing. The term X-Factor means the relative rotation of shoulders with respect to hips during the golf swing. To ascertain the Effective X-Factor that resulted in a high club head speed at impact six golfers' swing motions were videotaped and analyzed using three-dimensional techniques. The results can be summarized as follows. The standard deviations of the professionals' average club head speeds were higher than the amateurs'. This means that the professionals' swing skills were better than amateurs' in driving accuracy and consistency. As the club head speeds were increased gradually the X-Factors and the club head speeds had reached to the subjects' average club head speeds, but the X-Factors and the club head speeds were not increased above the subjects' average club head speeds. The X-Factor Stretch early in the down swing was existed and Professional stretched values were higher than the amateurs. In conclusion my research results suggested that the increase in Effective X-Factors had no relationship to the increase in club head speeds.

• Journal of Power System Engineering
• /
• v.6 no.4
• /
• pp.43-48
• /
• 2002

This paper presents a seam tracking controller of high speed rotating arc sensor developed by microprocessor based system. The seam tracking algorithm is based on the average current value at each interval region of four phase points on one rotating cycle. To remove the noise effect for the measured current, the area during one rotating cycle is separated into four regions of front, rear, left and right. The average values at each region are calculated, using the regional current values and a low pass filter incorporating the moving average and exponential smoothing methods is adopted. The effectiveness is proven through the experimental results for several kinds of welding condition.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.187-196
• /
• 1999

The increasing interest in the use of Automated Speed Enforcement (ASE) systems in Korea enables to enforce speed violation by National Police Agency. We have analyzed the mechanism of ASE systems on traffic safety throughout Korea. 1 The data collected on a 2km road-section of each 32 ASE stations during one rear period indicate significant safety improvement. The results were (a) a decrease in the total number of accidents of 28%, (b) a decrease in the number of fatalities of 60%. 2. The study also that ASE systems are effective to reduce average speed, speed variance, and short headway. 3. Based on the operational data collected at 15 locations, an aggregate safety prediction model is proposed as a multiple regressions form. The primary operational variables that appear to affect the frequencies of accident are : average speed, speed variance, and the number of vehicles exceeding 30km/h of posted speed limit.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.167-173
• /
• 2012

PURPOSES : This study is to develop speed correction factor for more realistic Level-of-Service(LOS) at multilane highway. METHODS : In this study, we compared speed difference the degree of speed reductions in actual multilane road conditions with speed reduction considering speed correction factor presented in highway capacity manual using statistical techniques. And also we presents new speed correction factor analyzing collected data at national highway No.1 (Goyang~Wolrung). RESULTS : The result of analyzing and comparing new suggested speed correction factor with speed correction factor in Korea Highway Capacity Manual (KHCM) shows RMSE (Root Mean Square Error) in new speed correction factor (RMSE 1.5) is much lower than existing speed correction factor (RMSE 13.4). New suggested speed correction can be used for analyzing Level-of-Service at multilane highway. And also we suggests improvements for analysis procedure in analyzing Level-of-Service at multilane highway CONCLUSIONS : As a result of comparing differences, we draw the causes that effect the differences in speed and suggest new speed correction factor that consider traffic volumes. It can be more rational because it uses speed correction factor which can consider more realistic traffic conditions, etc.