• The Korean Journal of Ceramics
• /
• 제6권3호
• /
• pp.229-235
• /
• 2000

The spherical silica powder was synthesized by varying the kinds of solvent and mixing energy in emulsion method. The stirring speed varied from 500 to 1000 r.p.m. at 5$0^{\circ}C$ for 2h. Toluene in benzyl groups and a series of alkanes were used as dispersant. The average size of spherical silica particles decreased with increasing the stirring speed and the chain length o solvents used in this work. The average size was controlled in the range of 134~28$\mu\textrm{m}$ by selecting a proper solvent and stirring speed. The optimum processing parameters were described in details.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1463-1472
• /
• 2008

The present paper to relate with the maintenance of the high-speed vehicle, KTX and is to treat a reliability evaluation. The reliability of the high-speed vehicle while operating between-failure average mileage (MKBSF) and parts between-failure average mileage (MKBF), 1,000,000 per km service failure number of items and availability and per km evaluated a maintenance expense. The reliability evaluation results and 2007 year reliability management indexes compared in 2006 years and they improved, per km the maintenance expense compared at 2006 and 36.6% was decreased. Reliability management activity leads and availability of the high-speed vehicle, safety improves and with the fact that will be able to decrease the maintenance expense which is an economic scale of railroad service is expected.

• 전자공학회논문지B
• /
• 제31B권9호
• /
• pp.36-46
• /
• 1994

A analog disturbance observer, which is suitable for servo motor drive, was employed to suppressi control of the impact drop disturbance. The main advantage of the observer is that a fast response disturbance estimation is obtained using the detected motor cuttent and speed. And the new M/T method for motor speed detection is proposed. The method should be able to reduce the detection dead time compared with the Ohmae's M/T method. Also, the low speed control of a servo motor using instantaneous speed detection method is described. To estimate the instantaneous speed from the average speed, the speed estimator of the first order is proposed. Actually we confirmed that these methods improve the speed control performance of the servo system with experiments.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.657-662
• /
• 2004

This paper presented is a case study of a real compressor rotor of a refinery plant for high speed balancing of flexible rotor. The rotor was tested in the expert high-speed balancing facility established by KIMM at early 2004. The capability of the facility can reach 40000rpm in rotation speed and 8 ton in rotor weight for high-speed balancing. The facility performs multi-plane at-speed balancing using influence coefficient from the vibration data measured at two pedestals. The test rotor had exceeded permissible criteria of vibration at initial run. But by processing a low-speed balancing at 1000 rpm and six trial run trying to calculate influence coefficient of rotor to the range of operating speed, the final result of high-speed balancing revealed a remarkable reduce of vibration at pedestal of the rotor.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제3권1호
• /
• pp.105-111
• /
• 2003

This paper is researching the storing of 40 different kinds of conditions. Such as, car speed, delay in starting time and the volume of cars in traffic. Through the use of a central nervous networking system or AI, using 10 different intersecting roads. We will improve the green traffic light. And allow more cars to easily flow through the intersections. Now days, with increasing many vehicles on restricted roads, the conventional traffic light creates prove startup-delay time and end-lag-time. The conventional traffic light loses the function of optimal cycle. And so, 30-45% of conventional traffic cycle is not matched to the present traffic cycle. In this paper proposes electro sensitive traffic light using fuzzy look up table method which will reduce the average vehicle waiting time and improve average vehicle speed. Computer simulation results prove that reducing the average vehicle waiting time which proposed considering passing vehicle length for optimal traffic cycle is better than fixed signal method which dosen't consider vehicle length.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.700-705
• /
• 2001

The paper presents a seam tracking controller of high speed rotating arc sensor developed by microprocessor based system. The seam tracking algorithm is based on the average current value at each interval region of four phase points on one rotating cycle. To remove the noise effect for the measured current, the area during one rotating cycle is separated into four regions of front, rear, left and right. The average values at each region are calculated, using the regional current values and a low pass filter incorporating the moving average and exponential smoothing methods is adopted.

• 한국운동역학회지
• /
• 제15권3호
• /
• pp.153-159
• /
• 2005

The purpose of this study was to investigate the Effective X-Factor in golf swing. The term X-Factor means the relative rotation of shoulders with respect to hips during the golf swing. To ascertain the Effective X-Factor that resulted in a high club head speed at impact six golfers' swing motions were videotaped and analyzed using three-dimensional techniques. The results can be summarized as follows. The standard deviations of the professionals' average club head speeds were higher than the amateurs'. This means that the professionals' swing skills were better than amateurs' in driving accuracy and consistency. As the club head speeds were increased gradually the X-Factors and the club head speeds had reached to the subjects' average club head speeds, but the X-Factors and the club head speeds were not increased above the subjects' average club head speeds. The X-Factor Stretch early in the down swing was existed and Professional stretched values were higher than the amateurs. In conclusion my research results suggested that the increase in Effective X-Factors had no relationship to the increase in club head speeds.

• 동력기계공학회지
• /
• 제6권4호
• /
• pp.43-48
• /
• 2002

This paper presents a seam tracking controller of high speed rotating arc sensor developed by microprocessor based system. The seam tracking algorithm is based on the average current value at each interval region of four phase points on one rotating cycle. To remove the noise effect for the measured current, the area during one rotating cycle is separated into four regions of front, rear, left and right. The average values at each region are calculated, using the regional current values and a low pass filter incorporating the moving average and exponential smoothing methods is adopted. The effectiveness is proven through the experimental results for several kinds of welding condition.

• 대한교통학회지
• /
• 제17권1호
• /
• pp.187-196
• /
• 1999

본 연구의 목적은 국내에 설치가 확대되고 있는 자동과속단속시스템의 교통안전 개선 메커니즘을 밝히자는 것이다. 이를 위해서 첫째, 시스템 운영이 교통류 특성에 미치는 영향을 분석하고, 둘째, 교통류 특성 변수와 안전도와의 모형을 설정하였다. 1997년부터 운영된 32대 시스템의 1년간 운영효과를 분석한 결과 교통사고 28%, 사망자수 60%가 감소한 것으로 나타났다. 시스템 설치지점의 교통류 특성변화를 분석한 결과 평균속도, 속도분산, 짧은 차두시간 비율 등의 변수가 현저하게 감소하였다. 교통사고빈도와 교통류 특성 변수간의 회귀모형을 설정한 결과 평균속도, 속도분산, 과속교통량이 유의한 설명변수로 나타났다. 따라서 자동과속단속시스템의 교통안전도의 개선 메커니즘은 (1)단속시스템 도입 $\longrightarrow$(2)교통류 특성 개선 $\longrightarrow$ (3)안전도개선이란 과정에 의하여 달성된다는 가설을 입증하였다. 본 연구는 ITS의 도입이 교통안전에 미치는 효과를 계량적으로 평가할 수 있는 토대가 될 것이며 동적 교통안전(operational traffic safety)이란 측면에서 교통안전 연구에 대한 새로운 시각을 제공하는데 의의가 있다고 하겠다.

• 한국도로학회논문집
• /
• 제14권6호
• /
• pp.167-173
• /
• 2012

PURPOSES : This study is to develop speed correction factor for more realistic Level-of-Service(LOS) at multilane highway. METHODS : In this study, we compared speed difference the degree of speed reductions in actual multilane road conditions with speed reduction considering speed correction factor presented in highway capacity manual using statistical techniques. And also we presents new speed correction factor analyzing collected data at national highway No.1 (Goyang~Wolrung). RESULTS : The result of analyzing and comparing new suggested speed correction factor with speed correction factor in Korea Highway Capacity Manual (KHCM) shows RMSE (Root Mean Square Error) in new speed correction factor (RMSE 1.5) is much lower than existing speed correction factor (RMSE 13.4). New suggested speed correction can be used for analyzing Level-of-Service at multilane highway. And also we suggests improvements for analysis procedure in analyzing Level-of-Service at multilane highway CONCLUSIONS : As a result of comparing differences, we draw the causes that effect the differences in speed and suggest new speed correction factor that consider traffic volumes. It can be more rational because it uses speed correction factor which can consider more realistic traffic conditions, etc.