• Phonetics and Speech Sciences
• /
• v.6 no.1
• /
• pp.21-30
• /
• 2014

This study aims to discuss pitch slope on Korean intonation curve in spontaneous speech data. For this study, 656 utterances were taken in the spoken corpus and used 'close-copy stylization'. And then the physical feature of pitch movements was extracted for the study. The pitch slope was calculated on the basis of time and pitch range in each utterance. As a result, the average and distribution of pitch slope is similar between men and women in the range of the pitch movement except for essential differences. The slope of pitch movement confirms that there are no differences between men and women. Pitch slope on a scale of -10 to 10 is 90% of the entire pitch slope; pitch slope that moves by time scale without curve is 33.1%; pitch slope that moves half of the pitch bandwidth during the average time for pitch movement is 23.4%; pitch slope that moves 100% of pitch bandwidth during a half of the average time for pitch movement is 10.4%. Those results imply the possibility of standardization methods of Korean intonation by pitch slope.

• Journal of The Korean Society of Integrative Medicine
• /
• v.5 no.4
• /
• pp.1-9
• /
• 2017

Purpose : This study was conducted among 195 adults in their 20s. To analyze the impact of the slope types of the scapulae on the plantar surface of the foot, the average pressure (AP), the maximum pressure (MP), the average of local distribution values, and the average movement of the center of pressure (COP) of the different slope types of the scapulae were compared. Method : The anterior-posterior slopes of the scapulae were measured by comparing the slopes of the left and right sides of the scapulae based on the differences in the height and the slope of the coracoid process and the angulus inferior scapulae. Those whose left side of the scapulae had an anterior slope were categorized as type 1, and those whose right side of the scapulae had an anterior slope, as type 2. The average plantar pressure, the center of plantar pressure, the maximum plantar pressure, and local distribution values were analyzed using a plantar pressure analyzer of the FSA. Result : In terms of the AP of the left and right feet, there was no statistically significant difference both in types 1 and 2 on the left and right feet. The comparison results of the MP and the average of local distribution values of the two slope types of the scapulae showed that there was no statistically significant difference on the X-axis both in types 1 and 2 on the left and right feet, but that there was a large statistically significant difference on the Y-axis both in types 1 and 2. That is, the MP of the right foot of the left anterior slope type was located more on the hindfoot than that of the right anterior slope type, and the MP of the left foot of the left anterior slope type was located more on the hindfoot than that of right anterior slope type. Conclusion : This study can be used as fundamental data to predict differences in the location and size of the COP and changes in plantar pressure distribution depending on the slope types of the scapulae, and control the distribution for therapeutic purposes.

• Communications for Statistical Applications and Methods
• /
• v.7 no.2
• /
• pp.415-426
• /
• 2000

Hader and Park (1978) introduced the idea of slope rotatability, and Park (1987) introduced the concept of slope rotatability over all directions, and gave necessary and sufficient conditions. Park and Kim (1992) proposed a measure that represent the extent of slope rotatability for a given response surface design. Kim (1993) proposed a measure that represent the extent of slope rotatavility over all directions. In this paper, we embodied the measure of slope rotatability over all directions. Examples of applying this measure to some response surface designs are also given. In this response surface design of slope rotatavility over all directions, we obtain the mean slope variances on the spherical surface to select better experimental design varying the number of center points and radius.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.31-34
• /
• 2003

There are several types of switching table for selection voltage vector in direct torque control of induction motor. In general, two-quadrant and four-quadrant operation switching table are used mostly. Two-quadrant operation has an advantage that reduced the torque ripples in comparison with four-quadrant operation, but it has the defect that is not constant average torque. Because the torque increasing slope size by non-zero voltage vector is different from the torque decreasing slope size by zero voltage vector as speed region. The main objective of this study is to maintain constant average torque using two-quadrant operation switching table. In proposed method, the torque increasing slope or decreasing slope are calculated before selected voltage vector is applied. Then, it is applied to zero voltage vector or non-zero voltage vector until the torque increasing slope and decreasing slope are equal. In total magnitude. Therefore it becomes to maintain average torque at whole operation speed. The validity of the proposed method is proven by simulated and experimental results.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.2
• /
• pp.145-154
• /
• 2020

Objective: The purpose of this study was to determine the relationship between impact and shear peak force, and tibia-accelerometer variables during running. Method: Twenty-five male heel strike runners (mean age: 23.5±3.6 yrs, mean height: 176.3±3.3 m/s, mean mass: 71.8±9.7 kg) were recruited in this study. The peak impact and anteroposterior shear forces during treadmill running (Bertec, USA) were collected, and impact shock variables were computed by using a triaxial accelerometer (Noraxon, USA). One-way ANOVA was used to test the influence of the running speed on the parameters. Pearson's partial correlation was used to investigate the relationship between the peak impact and shear force, and accelerometer variables. Results: The running speed affected the peak impact and posterior shear force, time, slope, and peak vertical and resultant tibial acceleration, slope at heel contact. Significant correlations were noticed between the peak impact force and peak vertical and resultant tibia acceleration, and between peak impact average slope and peak vertical and resultant tibia acceleration average slope, and between posterior peak (FyP) and peak vertical tibia acceleration, and between posterior peak instantaneous slop and peak vertical tibial acceleration during running at 3 m/s. However, it was observed that correlations between peak impact average slope and peak vertical tibia acceleration average slope, between posterior peak time and peak vertical and resultant tibia acceleration time, between posterior peak instantaneous slope and peak vertical tibial acceleration instantaneous slope during running at 4 m/s. Conclusion: Careful analysis is required when investigating the linear relationship between the impact and shear force, and tibia accelerometer components during relatively fast running speed.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.200-200
• /
• 2001

백판지 면성은 표면 백색도의 변이, 불투명도의 변이, 광택도, 거치름도, 표면 지합, 표면 요철 등 다양한 인자들로 표현되고 있다. 인쇄소에서는 인쇄를 하기 때문에 화선 부에서의 백색도나 불투명도 등은 크게 불만 요소로 작용하지는 않으나 표면 요철의 경우에는 인쇄 후 화선부에서도 나타나기 때문에 고객 불만의 한 요소로 인식되어 진 다. 따라서 본 연구에서는 백판지 면성의 여러 인자 중 표면 요철의 평가에 대해 다루 고자 하였다. 백판지 표면 요철을 시각적으로 나타내기 위한 방법으로 3-Dimensinal topography를 얻을 수 있는 Zygo와 Stylus를 이용, FFT 변환을 통하여 2-dimensional topography를 얻는 방법이 연구되었다. 그러나 기자재 비용, 측정 시간 등의 문제 등으로 표면 요철 을 평가하기 어려운 점이 있다. 본 연구에서는 백판지를 T APIO를 이용하여 O.2mm간격으로 두께를 측정하였고 A verage slope와 Profile length라는 개념을 도입하여 수치 적으로 표면 요철을 정 량화 하였다. Average slope는 1mm 간격으로 이동하였을 때 높이의 편차를 평균하는 값이다. 또 한 Video eam을 이용하여 표면 요철의 형태를 촬영하여 시각적으로 판단할 수 있도록 하였다. 위의 측정 방법으로 국내, 외 12개의 Sample에 대해 Profile length와 Average s slope를 계산하였다. 고객의 주관적 평가를 의사결정 방법 중 하나인 AHP법을 이용하여 주관적인 정성 평가를 수치적으로 정량화할 수 있었으며 실제 측정 결과와 비교, 상관분석을 실시 하 였다. 고객의 평가 결과와 Profile length, average slope의 상관성을 분석한 결과 A Average slope에서 유의성 있는 상관성을 얻을 수 있었고 표면 사진을 비교하였을 때 C Coating 방식 등을 유추할 수 있었다. 이러한 평가 방법을 현장에 적용하였으며 그 결과, 공정 개선 전, 후의 표변을 측정, 개선 유무를 쉽게 판단할 수 있었다.

• Journal of Integrative Natural Science
• /
• v.10 no.4
• /
• pp.232-239
• /
• 2017

The researcher set up multiple sensor units on the road slope such as national highway and highway where there is a possibility of loss, and using the acceleration sensor built into the sensor unit the researcher will sense whether the inclination of the road slope occur in real time, and Based on the sensed data, the researcher tries to implement a system that detects collapse of road slope and dangerous situation. In the experiment of measuring the error between the actual measurement time and the judgment time of the monitoring system when judging the warning of the sensor and falling rock detection by using the acceleration sensor, the error between measurement time and the judgment time at the sensor warning was 0.34 seconds on average, and an error between measurement time and judgment time at falling rock detection was 0.21 seconds on average. The error is relatively small, the accuracy is high, and thus the change of the slope can be clearly judged.

• Journal of Environmental Science International
• /
• v.9 no.1
• /
• pp.13-18
• /
• 2000

The purpose of this study is to estimate the low-flow statistics at the mountainous watershed. The formulation for the estimation of the design low-flow statistics was obtained by means of a hydraulic approach applied to a simple conceptual model for a mountainous watershed. Three of the independent variables associated with the low-flow statistics is watershed area(A), average basin slope(S) and the base flow recession constant(K); Watershed area was measured from topographic maps and average basin slope is approximated in this study using Strahler's slope determining method. And base flow recession constant computed using Vogel and Kroll's method. Unfortunately, this method is usually unavailable at ungaged sites. In this study, recession constant at ungaged sites is estimated using graphical regression method used by Giese and Mason. The model for estimating low-flow statistics were applied to all 61 catchments in the Sumjin, Mankyung basin.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.1 s.108
• /
• pp.33-48
• /
• 2005

The purpose of this study was to discover the landscape visual image of the slope scene and their harmony with surrounding sceneries. This research utilized the basic study tool of psycho-physics and processed the case study of ten types of slope construction scene along the highway. The analysis was performed by the data obtained from the questionnaires and the photos for the slope construction scene. The questionnaires for analysis the image of the slope construction scene and their harmony with surrounding sceneries were designed using semantic differential scale and 5 point Likert-scale. The major findings were as follows. 1. At the part of the visual preferences analysis, the slope revegetation methods showed high level of preferences generally than on the slope structure methods. While the slope revegetation methods were estimated friendly, continuity, harmonious, soft, light and wide, the slope revegetation methods were estimated unstable, female, static, simple, omnipresent, appeared as policeman of weak inclination. Also the slope structure methods were estimated stable, manly, complicated, steep and healthy but rough, unharmonious, unfamiliar and heavy. 2. Psychological factors, related to the satisfaction for the slope revegetation methods were composed of three factors, aesthetic, individuality and physical character. And the slope structure methods were composed of five factors, aesthetic, individuality, stability, physical character, and complexity. 3. At the part of harmony with surrounding landscapes, the slope revegetation methods were evaluated highly but the slope structure methods received the lowest evaluation. Also the harmony analysis with surrounding view on the slope revegetation methods showed degree of high more than average in all texture, form, color and scale but the slope structure methods showed degree of fewer than average degree in form, scale, color and texture.

• Journal of Korean Society of Forest Science
• /
• v.96 no.6
• /
• pp.611-619
• /
• 2007

This study was carried out to analyze the landslide characteristics and forest environment factors on the landslide area of 7 national parks in korea. The results obtained from this study were summarized as follows; The total number of landslide occurrence was 44 areas. The average length of the landslides scar was 152 m, average width was 17 m. And the average area was $2,818m^2$. The factors influencing landslides were highly occurred in Metamorphic rock, mixed forest type. And also, $30{\sim}35^{\circ}$ in slope gradient, NE in slope aspect, slope higher than 1,000 m, concave (凹) type in vertical and cross slope, 0 ordered stream. The main factors affecting landslide area in stepwise regression analysis were sheet type in landslided shape, NE in slope aspect, 2 ordered stream, SE in slope aspect, slope gradient and complex slope in cross slope type in order of regression coefficient.