• Journal of Digital Contents Society
• /
• v.15 no.3
• /
• pp.433-438
• /
• 2014

In this paper, we proposed the low power algorithm consider the battery and the task. The proposed algorithm setting the power consumption of unit time consider the capacity of the battery and the target time. Calculate the power consumption of all tasks. Calculate the average power consumption by the task have maximum power consumption and the task have minimum power consumption. Recalculate average power consumption consider the unit time of task. Compare calculated average power consumption and average power consumption of task. Compared results, low power algorithm processing the average power consumption less than or equal calculated power consumption of task. Low-power algorithm is greater than the average power consumption of the task to perform targeted tasks. Low-power processors and the task by dividing the power consumption of the device in large part for the low-power consumption is performed. Experiments [6] were compared with the results of the power consumption. The experimental results [6] is reduced power consumption than the efficiency of the algorithm has been demonstrated.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.107-117
• /
• 2015

This paper presents an energy-efficient (low power) prime-field hyperelliptic curve cryptography (HECC) processor with uniform power draw. The HECC processor performs divisor scalar multiplication on the Jacobian of genus 2 hyperelliptic curves defined over prime fields for arbitrary field and curve parameters. It supports the most frequent case of divisor doubling and addition. The optimized implementation, which is synthesized in a $0.13{\mu}m$ standard CMOS technology, performs an 81-bit divisor multiplication in 503 ms consuming only $6.55{\mu}J$ of energy (average power consumption is $12.76{\mu}W$). In addition, we present a technique to make the power consumption of the HECC processor more uniform and lower the peaks of its power consumption.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.869-877
• /
• 2020

The power consumption in the low consistency (LC) refining is an important indicator for the optimal control of the process and it is composed of the net power and the no-load power. The refining efficiency and process characterization of LC refining are directly affected by power consumption. In this paper, the effect of pulp consistency and average fiber length on the power consumption and refining efficiency were studied through the LC refining trials conducted by an experimental disc refiner. It is found that the curve of power-gap clearance can be divided into constant power section, power reduction section, and power increase section. And the no-load power and the adjustable domain of loading applied by the refining plates will increase as the increase of pulp consistency, while the increase of net power is larger than that of no-load power which makes the increasing of refining efficiency. Meanwhile, the adjustable domain of loading applied by the refining plates can be slightly improved by increasing the average fiber length, but its effect on the no-load power in the LC refining process can be neglected. The study of power consumption in LC refining is of positive significance for the proper selection of pulp properties in LC refining, in-depth exploration of refining mechanism, and energy consumption reduction in refining.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9B
• /
• pp.811-820
• /
• 2006

In this paper, The correlation of the power consumption of sensor node is analyzed according to the analyze parameter in IEEE 802.15.4 star sensor network. And It is studied the influence on analysis parameter. The power consumption of sensor network in transmission process and average transmission power consumption drives to numerical formula. And CSEM WiseNET system measurement value is used. As a simulation result, The power consumption of sensor node in star network consist of 10 sensor nodes is more than 20 % that in single network in average. When beacon signal interval is 0.1 second in all frequency bands, the power consumption of sensor node in up-link is more than 2.5 times that in down-link in average. When beacon signal interval is 1 second and the number of sensor nodes increases to 100 and sensing data increases to 100 byte, the power consumption of sensor node increases to 2.3 times. And The superior performance of 2.4 GHz frequency band has than 868/915 MHz frequency band up to $6{\sim}12$ times.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1379-1382
• /
• 2003

Recently, mobile embedded systems used widly in various applications. Managing power consumption is becoming a matter of primary concern because those systems use limited power supply. As an approach reduce power consumption, voltage can be scaled down. according to the execution time and deadline. By reducing the supplying voltage to 1/N power consumption can be reduced to 1/N. DPM-S is a well known method for dynamic voltage scaling. In this paper, we enhanced DPM-S by using average execution time aggressively. The frequency of processor is calculated based in average execution time instead of worst case execution time. Simulation results show that our method achieve up to 5％ energy savings than DPM-S.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.8
• /
• pp.472-476
• /
• 2004

Standby power is the electricity consumed in an electrical equipment when it is switched-off or not performing its main function. Due to the acceleration of digital electronics and home networking, standby power use tends to increase rapidly year by year. In this paper, standby power consumption in residential sector in Korea has been surveyed and reported for the first time. Totally 825 pieces of electrical equipments that consume standby power in 53 households were investigated. The average standby power per equipment and total standby power per household were 3.66W and 57.0W, respectively. Annual standby power consumption per household was estimated 306kWh; which means the standby power consumption in residential sector in Korea can be estimated 4.6TWh a year representing 1.67 percent of total electrical consumption (274TWh).

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.484-492
• /
• 2016

Smart grid (SG) technology is now elevating the conventional power grid system to one that functions more cooperatively, responsively, and economically. When applied in an SG the demand side management (DSM) technique can improve its reliability by dynamically changing electricity consumption or rescheduling it. In this paper, we propose a new SG scheduling scheme that uses the DSM technique. To achieve effective SG management, we adopt a mixed pricing strategy based on the Rubinstein-Stahl bargaining game and a repeated game model. The proposed game-based pricing strategy provides energy routing for effective energy sharing and allows consumers to make informed decisions regarding their power consumption. Our approach can encourage consumers to schedule their power consumption profiles independently while minimizing their payment and the peak-to-average ratio (PAR). Through a simulation study, it is demonstrated that the proposed scheme can obtain a better performance than other existing schemes in terms of power consumption, price, average payment, etc.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.402-403
• /
• 2009

A variety of power reduction technologies is introduced and the benefits of the technologies are discussed. PenTile$^{(R)}$ DBLC (Dynamic Brightness LED Control) combined with SABC (Sensor-Based Adaptive Brightness Control) enables to achieve the average LED power consumption to one third. The panel power reduction of 25% can be achieved with low power driving technology, ALS (Active Level Shifter). MIP (Memory In Pixel) is expected to be useful in transflective display because the whole display area can be utilized in reflective mode with power consumption of 1mW.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.5 s.133
• /
• pp.38-44
• /
• 2005

Peripheral milling is one of the most important wood machining processes in wood industry. Power consumption characteristics of twelve Korean domestic species in peripheral milling were investigated in this study. Image analysis technique was applied to extract proper data from the power consumption profiles. Average power consumption increased as cutting depth increased and specific cutting power decreased as cutting depth increased. However, no significant relationship could be found between density and power consumption and between cutting depth and surface roughness.

• Journal of Communications and Networks
• /
• v.18 no.4
• /
• pp.600-609
• /
• 2016

In this paper, we propose a two-stage base station (BS) sleeping scheme to save energy consumption in cellular networks. The BS sleeping mode is divided into a light sleeping stage and a deep sleeping stage according to whether there is a user in the BS's coverage. In the light sleeping stage, a BS will retain its coverage and frequently switch between the on state and the doze state according to the service characteristics. While in the deep sleeping stage analysis, the BS will shut down its coverage, and neighbor BSs will patch the coverage hole. Several closed-form formulas are derived to demonstrate the power consumption in each sleeping stage and the stage switching conditions are discussed to minimize the average power consumption. The average traffic delay caused by BS sleeping and the average deep sleeping rate under a given traffic load have also been studied. In addition, it is shown that BS sleeping is not always possible because of the limited quality of service (QoS) requirements. Simulation results show that the proposed scheme can effectively reduce the average BS power consumption, at the cost of some extra traffic delay. In summary, our proposed framework provides an essential understanding of the design of future green networks that aim to take full advantage of different stages of BS sleeping to obtain the best energy efficiency.