• 펄프종이기술
• /
• 제42권1호
• /
• pp.7-12
• /
• 2010

Morphological characteristics of hemp fiber were investigated using a light microscope in order to provide fundamental data for the use of hemp as a papermaking law material. Phloem of hemp is composed of cortical parenchyma cells and bast fiber with thick walls while xylem is composed of vessel, wood fiber and ray parenchyma cells. Also there are solitary pore and radial pore multiple which exist in diffuse porous pattern. Ray cells consist of uniseriate rays and thin walled ray parenchyma cells. Wood fibers are composed of three types: a large diameter fiber with longer length; a large diameter fiber with shorter length; a small diameter fiber with medium length. Vessel elements are composed of: a medium length one; a longer length one; the one whose both end walls have ligules or tails. Parenchyma cells in xylem and pit parenchyma cells have completely different size and shape. For bast fiber, the average length is about 4.4 mm and the width is about $30.5\;{\mu}m$; for vessel element, $600.0\;{\mu}m$ in length and $493.6\;{\mu}m$ in width; for wood fiber, $1000\;{\mu}m$ and $38.9\;{\mu}m$; for parenchyma cell, $50\;{\mu}m$ and $26.4\;{\mu}m$.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 추계학술발표논문집 1부
• /
• pp.110-114
• /
• 2010

Li-incorporated mesoporous $TiO_2$ materials with various pore-sized istributions were synthesized by using triblockcopolymers via a sol-gel process in a queous solution. The properties of the se materials were characterized by HR-TEM, XRD, and BET analysis. All particles have spherical morphology with a diameterrange of $1-3{\mu}m$. The mesoporous $TiO_2$ materials calcined at $400^{\circ}C$ and their specific surface area, average pore size and crystallite sizes were 210 $m^2g^{-1}$, 6.4 nm and 8.8 nm respectively. The Li-incorporated mesoporous $TiO_2$ were tested for $CO_2$ adsorption and its adsorption capacity is 90mg/g. The Li-incorporated mesoporous $TiO_2$ ar eobserved to be thermally stable, recyclable and greens or bent for $CO_2$ capture. The effect of bimetallic $ZrLiTiO_2$ is also studied for $CO_2$ adsorption.

• 한국산학기술학회논문지
• /
• 제19권10호
• /
• pp.598-602
• /
• 2018

석유정제공장에서 사용된 폐촉매의 특성을 조사하여 바나듐 레독스 흐름전지용 소재인 전해액의 제조에 대하여 연구하였다. 석유정제공정에서 사용된 폐촉매의 총공극 부피, 비표면적 및 평균 기공크기는 BET법과 BJH법으로 계산하여 각각 3.96cc/g, 13.81m2/g, 1.15A 구하여 폐촉매에서 바나듐을 회수하여 전해액으로 제조 할 수 있음을 확인하였다. 폐촉매를 TG-DTA분석결과, $25^{\circ}C$부터 $700^{\circ}C$ 범위에서 중량손실이 약 23wt%였다. 폐촉매의 성분을 ICP 장비를 분석하여 황, 바나듐, 니켈, 알루미늄, 망간 철 구리 등의 원소를 확인하였다. 또한 TEM 장비로 측정한 결과 바나듐 외 다른 원소들이 결정성 클러스터가 밝은 점으로 명백하게 드러남을 알 수 있었다. 액액 추출법을 사용하여 폐촉매로 부터 바나듐을 99.25%로 분리하여 추출한 바나듐용액의 전기화학적 특성분석을 위해 CV(cyclic votammetry)측정한 결과, 산화/환원피크가 나타남으로서 전해질 용액으로서의 가능성을 보여주고 있다. 또한 폐촉매로 부터 추출된 바나듐 용액의 순도를 더욱 높여 전해질 용액을 제조하면 기존 상용화된 전해질 성능과 같은 것을 제조 할 것으로 사료된다.

• Journal of Electrochemical Science and Technology
• /
• 제6권4호
• /
• pp.139-145
• /
• 2015

Capacitive deionization (CDI) process is a novel approach for desalination of an aqueous salt solution. In the present study, an activated carbon cloth (ACC) is proposed as effective electrode material. Initially the carbon cloth was activated in 1 M and 8 M HNO₃ for 9 hours at room temperature. The untreated and chemically activated carbon cloth (ACC) electrode materials were subjected to BET surface area measurements in order to get information about their specific surface area, average pore size, total pore volume and micropore area. The above materials were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM) also. The electrochemical studies for the electrodes were done using cyclic voltammetry (CV) in 0.1 M Na₂SO₄ medium. From the studies, it was found that resistivity of the activated carbon cloth electrodes (treated in 1 M and 8 M HNO₃) was decreased significantly by the chemical oxidation in nitric acid at room temperature and its capacitance was found to be 90 F/g (1 M HNO₃) and 154 F/g (8 M HNO₃) respectively in 0.1 M Na₂SO₄ solution. The capacitive deionization behavior of a single cell CDI with activated carbon cloth electrodes was also studied and reported in this work.

• 한국응용과학기술학회지
• /
• 제22권4호
• /
• pp.306-314
• /
• 2005

In this study, spherical $pre-BaTiO_3$ particles are prepared by gelation and aging process in autoclave without catalysts. The (Ba-Ti) gel used as a starting material was prepared by aging mixtures of titanyl acylate with barium acetate aqueous solution([glacial acetic acid (AcOH)]/[titanium isopropoxide (TIP)] 4, [barium acetate]/[TIP] 1) at $45^{\circ}C$ for 48hrs. XRD and SEM results for the (Ba-Ti) gel sample at aging process showed that the gel was formed via aggregation of the fine particles. It seems to be the primary particles of bulk (Ba-Ti) gel amorphous, but the spatial arrangement of barium and titanium in the (Ba-Ti) gel is similar to that in crystalline $BaTiO_3$ particles. From XRD and FT-IR. spectroscopy analysis it was found that the crystal structure of the prepared particles continuously transformed from amorphous to tetragonal as the calcination temperature increased, and crystallized spherical cubic and tetragonal $BaTiO_3$ powder obtained at the very low calcination temperature between $500^{\circ}C$ and $900^{\circ}C$ after 1hrs of heat treatment respectively. According to BET analysis result, final particle have pore structure of ink bottle shape which is produced by aggregation of fine spherical particles with surface area of $280m^2/g$ and average pore size of 130nm.

• 멤브레인
• /
• 제9권1호
• /
• pp.36-42
• /
• 1999

본 연구에서는 Si 미립자를 함유한 반도체 세정폐수의 관형막을 이용한 한외여과특성을 검토하였다. 관형막의 시간변화에 따른 투과유속의 감소현상은 막표면에 형성된 케익층의 증가 및 기공막힘에 기인하며, cross flow는 케익여과에 의한 막오염 형태를 보였으나 dead-end flow는 기공막힘과 케익여과에 의한 혼합형태를 보였다. Cross Flow의 케익저항의 크기는 3.16$\times$$10^{12}$ ~4.34$\times$$10^{12}$ $m^{-1}$ 였고, dead-end flow 는 6.6 $\times$$10^{12}$ ~12.19$\times$$10^{12}$ $m^{-1}$였다. 운전초기의 흐름형태에 따른 투과유속은 cross flow 가 dead-end flow 의 약 7 배였다. Cross flow 투과유속은 약 42 $\ell$/$m^2$ hr, 용질배제율은 약 96 % 였으며, 분리막공정을 거친 투과수 중의 Si 입자의 평균크기는 20nm였다.

• Geomechanics and Engineering
• /
• 제5권1호
• /
• pp.17-36
• /
• 2013

Settlement of the piled raft can be estimated even after years of completing the construction of any structure over the foundation. This study is devoted to carry out numerical analysis by the finite element method of the consolidation settlement of piled rafts over clayey soils and detecting the dissipation of excess pore water pressure and its effect on bearing capacity of piled raft foundations. The ABAQUS computer program is used as a finite element tool and the soil is represented by the modified Drucker-Prager/cap model. Five different configurations of pile groups are simulated in the finite element analysis. It was found that the settlement beneath the piled raft foundation resulted from the dissipation of excess pore water pressure considerably affects the final settlement of the foundation, and enough attention should be paid to settlement variation with time. The settlement behavior of unpiled raft shows bowl shaped settlement profile with maximum at the center. The degree of curvature of the raft under vertical load increases with the decrease of the raft thickness. For the same vertical load, the differential settlement of raft of ($10{\times}10m$) size decreases by more than 90% when the raft thickness increased from 0.75 m to 1.5 m. The average load carried by piles depends on the number of piles in the group. The groups of ($2{\times}1$, $3{\times}1$, $2{\times}2$, $3{\times}2$, and $3{\times}3$) piles were found to carry about 24%, 32%, 42%, 58%, and 79% of the total vertical load. The distribution of load between piles becomes more uniform with the increase of raft thickness.

• Composites Research
• /
• 제34권1호
• /
• pp.16-22
• /
• 2021

폴리우레탄폼(PUF)은 연질, 반경질, 경질 형태로 제작이 가능하여 산업적으로 다양한 분야에서 활용되고 있다. 그 중에서도 경질 폴리우레탄폼은 우수한 기계적 특성과 낮은 열전도도를 가지고 있어, 건축물의 단열재와 천연가스 운수송 분야에서 보냉재로 사용되고 있다. 해당 분야에서는 기계적 강도는 높이고 열전도도는 낮추고자 하는 기술적 수요가 꾸준히 요구되고 있다. 본 연구에서는 경질 폴리우레탄폼을 제작하고, 교반기의 임펠러 형태(Propeller, Dispersed turbine)에 따른 폼의 미세구조와 물성 변화를 연구하였다. FE-SEM 이미지 및 Micro-CT 분석을 통해 Dispersed turbine으로 제조한 폼의 평균 기공 크기가 Propeller로 제조한 기공보다 21.5% 작은 것을 확인하였다. 압축 강도는 작은 기공을 가진 폼에서 15.4% 향상되었고, 열전도도는 3.1% 감소하였다. 이러한 결과는 PUF 복합재 제조에 활용될 수 있다.

• Composites Research
• /
• 제33권6호
• /
• pp.336-340
• /
• 2020

본 연구에서는 헥사 메틸렌 테트라민을 촉매로 사용하여 이소프로판올에서 레소시놀과 퍼푸랄을 졸-겔 중축합한 후 이소프로판올 동결 건조 조건에서 유기 겔을 직접 건조시킨 후 질소 분위기에서 탄화시켜 탄소 에어로겔을 제조하였다. 탄소 에어로겔의 제조 조건은 퍼푸랄에 대한 레소시놀의 몰비를 변경하여 조사하였다. 탄소에어로겔의 기공 구조에 대한 제조조건의 영향은 질소 흡착 등온선에 의해 고찰하였다. 탄소 에어로겔의 특성은 주사전자현미경과 적외선 분광법을 가지고 측정하였다. 전기 이중층 커패시터에서 전극으로서의 탄소 에어로겔의 기공 접근성과 성능을 전기 화학적으로 고찰하였다. 결과적으로 BET 표면적과 비용량은 R/C 비율에 따라 증가하였으며, 765 ㎡/g 및 132 F/g의 최대 값은 각각 R/C 비율 200에서 달성되었다. 결론적으로 R/C 비율을 높이면 CA 전극의 평균 기공 크기가 증가하여 시스템의 속도 성능이 향상됨을 확인하였다.

• 상하수도학회지
• /
• 제18권6호
• /
• pp.770-777
• /
• 2004

Three pilot-scale membrane systems were operated using lake water as influent in this study. Microfiltration (MF) membrane with pore size of 0.01 m was used in Systen I of which filtration mode was set at constant pressure of $1kgf/cm^2$. Ultrafiltration (UF) membranes with molecular cutoff (MWCO) of 80,000 and 13,000 were used in System II-1 and II-2, respectively. Constant flow mode was applied at the range between 0.7 and $1.5m^3/m^2{\cdot}d$ (average of $1.1m^3/m^2${\cdot}d) for System II-1 and between 0.37 and $1.65m^3/m^2{\cdot}d$ (average of $1.18m^3/m^2{\cdot}d$) for System II-2. In System I, the flux changed from $1m^3/m^2{\cdot}d$ to $0.2m^3/m^2{\cdot}d$ during the operation time of 5 months. System II showed recovery of 94% under the allowable maximum pressure of $3kgf/cm^2$ during the same operation period. From these results, the efficient operation was observed in constant flow mode with respect to filtration time and recovery. Average filtrate turbidity showed 0.0071 NTU in System I and 0.0054 NTU in System II, which implied that high turbidity removal was obtained in both MF and UF systems with no significant difference between MF and UF. From the fact that membrane flux depends largely on membrane type and operation mode, a guideline of optimum design and operation should be suggested for application of membrane systems to full scale water treatment.