• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.218-223
• /
• 2019

To prevent the low heating effect of heating system caused by the high sheet resistance of CVD graphene, multi-layered graphene was laminated to implement a Transparent plane heating system with good optical properties of low-resistance. Low-resistance plane heating system implemented by $300{\times}400{\times}5mm$ heating plane laminated multi-layered CVD graphene film and PWM control system to drive efficient power. A plane resistance value of $85.5{\Omega}/sq$ was measured on average for 4-layer CVD graphene film used as a heating plane. Thus, the transfer by thermal film as the method of implementing low-resistance CVD graphene is reasonable. The experimental results of heat test show that an average heat-rise rate in low-resistance, transperent plane heating system using CVD graphene is $10^{\circ}C/min$ and has an optical transmittance rate of 86.44%. Therefore, the proposed heating system is applicable to large window glass and vehicle heating window-shild-glass.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.6
• /
• pp.78-83
• /
• 1999

This study discusses a non-contact optical technique, electronic speckle pattern interformetry(ESPI), that is well suited for in-plane and out-of-plane deformation measurement. However, the existing ESPI methods that are based on dual-exposure, real-time and time-average method have difficulties for accurate measurement of structure, due to irregular intensity and shake of phase. Therefore, phase shifting method has been proposed in order to solve this problem. About the method, the path of reference light in interferometry is shifted and added to least square fitting method to make the improvement in distinction and precision. This proposed method is applied to measure in -plane displacement that is compared with the previous method. Also, Used as specimen AS4/PE따 [30/=30/90]s was analyzed by ESPI based on real-time to determine the characteristics of vibration under no-load and tension. These results are quantitatively compared with those of FEM analysis inmode shapes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.234-238
• /
• 1999

The correlation between shape of electrical trees and partial discharge(PD) pulses in low density polyethylene(LDPE) were discussed. We observed growth feature of electrical tree by using optical microscope. On the basis of experimental results of measurements of trees occurring in the needle-plane arrangement with needle shape void and without needle shape void , statistical quantities are derived, which are relevant to PD pulse amplitude and phase. The PD quantities detected by partial discharge detector. we were analyzed q-n distribution pattern and $\psi$ -q-n distribution pattern. In this experiment, electrical trees in the needle-plane arrangement with needle shape void propagated branch type tree and in the needle-plane arrangement without needle shape void propagated bush type tree

• The Journal of Korean Academy of Prosthodontics
• /
• v.20 no.1
• /
• pp.83-91
• /
• 1982

The mandibular movement during mastication has been studied, however there is still much controversy, therefore the purpose of this study was to establish the fundamental data in order to provide the functional occlusion and information in prosthodontic treatment, and the diagnosis of temporomandibular joint disorder. The author analyzed the characteristics of the border and masticatory movements using the Mandibular Kinesiograph. The value, direction, deviation angulation of the border and masticatory movements were studied on the sagittal and frontal planes in 24 male subjects age of 22-28 without orofacial problems. The obtained results were as follows: 1. The values of border movement on the sagittal plane were an average of $25.81{\pm}5.14mm$ in vertical component and $24.37{\pm}3.76mm$ in ant-post component, and the posterior terminal hinge movement, $9.31{\pm}3.62mm$ in vertical component and $7.59{\pm}2.65mm$ in ant-post. component. 2. The distribution range of the masticatory movement within the border movement was an average of $19.2{\pm}12.81%$ of maximum ant-post, values and $55.5{\pm}16.1%$ of maximum values of border movement, and the movement path, for the most part, was directed to posterior deviation and ranged from 0.98 to 12.00mm, on an average of $5.15{\pm}3.49mm$. 3. On the frontal plane, a number of left and right deviation in 24 subjects was same, however, the right deviation was an average of $2.51{\pm}1.67mm$ compared with the left deviation. 4. On the frontal plane, the point of maximum lateral deviation was an average of $49.7{\pm}11.0%$ of maximum opening values. 5. The angulation between the terminal hinge movement path and the masticatory path was an average of $24.00{\pm}4.65$.

• Archives of Plastic Surgery
• /
• v.35 no.1
• /
• pp.78-85
• /
• 2008

Purpose: The capsular contracture has been the most common complication of augmentation with breast implant, a side effect quite difficult to treat. The latest trends in the correction of capsular contracture include total capsulectomy or conversion of implant pocket. In this study, in an attempt to correct capsular contracture, the authors performed reoperation which involved capsulectomy through peri-areolar approach and dual-plane conversion. The authors hereby report the clinical results of such correction of capsular contracture and examine the efficacy. Methods: The authors selected 46 patients who were admitted to the clinic from January 2004 to January 2007 (37 months), and performed dual-plane conversion through solely peri-areolar approach. Two types of operation were done: dual-plane conversion from subglandular plane or from submuscular plane. Results: The average follow-up time after conversion to the dual-plane position was 10 months. During the follow-up period, 83.1% of patients recovered from capsular contracture and were Baker class I, and in 10.9% the condition had relapsed into Baker class II or III contracture. Conclusion: This study has proven the effectiveness of the dual-plane conversion operation for correcting established capsular contracture after previous augmentation mammaplasty. In this study, all cases of dual-plane conversion operation was performed through peri-areolar approach, which can prevent the occurrence of visible scar on inframammary fold.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.2
• /
• pp.173-182
• /
• 1996

An analytical model has been developed to predict the elastic properties of a filled resin reinforced by chopped fibers, a three-phase composite such as a filled sheet molding compound(SMC). In the model the matrix material and fillers form an effective matrix. The effective matrix is then considered to be reinforced with long fibers lying in the sheet plane but randomly oriented in the plane. Expressions for the resulting transversely isotropic composite properties are explicitly presented. Using this model, the Young's and shear moduli are calculated for the SMC sample with filler weight fraction of 35% and fiber content of 30%. The same properties are also determined experimentally. The agreement between the calculated and measured elastic moduli is found to be very good for the in-plane properties. However, the out-of-plane properties show a large difference because the effect of voids is not taken into account in the model.

• Journal of Astronomy and Space Sciences
• /
• v.4 no.2
• /
• pp.89-94
• /
• 1987

By using the recently determined color excess and distance data of classical by Kim (1985), the distribution of interstellar reddening material was studied to see the general picture of the average rate of interstellar absorption out to about 7-8 kpc in the Galactic plane in various directions from the sun.

• The Journal of Korean Physical Therapy
• /
• v.14 no.3
• /
• pp.92-105
• /
• 2002

This research described dynamic scapulohumeral rhythm though the measurement of inter relationship between humorous and scapular movement during elevation of the arm in the scapular plane. In the previous studies static plane film X-ray has usually been used, but the limitation of such method was that it did not show the real· movement. In this study, we investigated real movement of humorous and scapular bones by Digital fluoroscopy system. 1. In resting position, humorous was taken to lie at the average $5.97^{\circ}$ in abduction, and scapular at the average $3.66^{\circ}$ in internal rotation. 2. At the maximal abduction, humorous was abducted to the average of 181.25", and scapular was rotated externally to $51.43^{\circ}$. 3. This research has shown that there is a variety of scapulohumeral rhythm from resting position to $60^{\circ}$ abduction in elevation of humorous. This case study demonstrated that the ratio n of scapulohumeral rhythm is 3.46 to 1, but there was individual difference.

• Clinics in Shoulder and Elbow
• /
• v.21 no.3
• /
• pp.113-119
• /
• 2018

Background: This study was undertaken to evaluate the positional relationship between planes of the glenoid component (the scapular plane and the perpendicular plane to the glenoid) and its surrounding structures. Methods: Computed tomography (CT) images of both shoulders of 100 patients were evaluated using the 3-dimensional CT reconstruction program ($Aquarius^{(R)}$; TeraRecon). We determined the most lateral scapular bony structure of the scapular plane and measured the shortest distance between the anterolateral corner of the acromion and the scapular plane. The distance between the scapular plane and the midpoint of the line connecting the posterolateral corner of acromion and the anterior tip of the coracoid process (fulcrum axis) was also evaluated. The perpendicular plane was then adjusted to the glenoid and the same values were re-assessed. Results: The acromion was the most lateral scapular structure of scapular plane and perpendicular plane to the glenoid. The average distance from the anterolateral corner of the acromion to the scapular plane was $10.44{\pm}5.11mm$, and to the plane perpendicular to the glenoid was $9.55{\pm}5.13mm$. The midpoint of fulcrum axis was positioned towards the acromion and was measured at $3.90{\pm}3.21mm$ from the scapular plane and at $3.84{\pm}3.17mm$ from the perpendicular plane to the glenoid. Conclusions: Our data indicates that the relationship between the perpendicular plane to the glenoid plane and its surrounding structures is reliable and can be used as guidelines during glenoid component insertion (level of evidence: Level IV, case series, treatment study).

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.101-106
• /
• 2004

Measurements of linear motion accuracy for one axis of NC lathe have achieved with laser interferometer system, but measurement of plane motion accuracy for two axes on zx-plane of NC lathe have not achieved with the above system. Therefore in this study, measuring unit system is organized using two optical linear scales in order to acquire error. data during of plane motion of ATC(Automatic Tool Change.) of NC lathe by reading zx-plane coordinates. Two optical linear scales of measuring unit are fixed on zx-plane of NC lathe, and moving part of the scales are fixed to the ATC and then error motion data of z, x-coordinates of the ATC are received from the scales through the PC counter card inserted in computer at constant time intervals using tick pulses coming out from computer. And then, error motion data files acquired from measuring are saved in computer memory and the aspect of plane motion are modeled to plots, and range of the error data, means. average deviations, and standard deviations etc. are calculated by means of statistical treatments using computer programs.