• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.2966-2970
• /
• 2012

Fullerene/polystyrene ($C_{60}$/PS) nano particle was prepared by using emulsion polymerization. Styrene and fullerene were emulsified in aqueous media in the presence of poly(N-vinyl pyridine) as an emulsion stabilizer, and polymerization was initiated by water soluble radical initiator, potassium persulfate. The obtained nano particles have an average diameter in the range of 400-500 nm. The fullerene contents in the nano particle can be controlled up to 15 wt % by varying the feed ratio, which was confirmed by themogravimetric analysis (TGA) and elemental analysis (EA). The structure and morphologies of the $C_{60}$/PS nano particles were examined by various analytical techniques such as dynamic light scattering (DLS), scanning electron microscope (SEM), transmission electron microscope (TEM), electron diffraction (ED) pattern, X-ray powder diffraction (XRD), and UV spectroscopy. Unlike conventional $C_{60}$/PS particles initiated by organic free radical initiators, in which the fullerene is copolymerized forming a covalent bond with styrene monomer, the prepared $C_{60}$/PS nano particles contain pristine fullerene as secondary particles homogeneously distributed in the polystyrene matrix.

• Asian Journal of Atmospheric Environment
• /
• 제10권2호
• /
• pp.114-123
• /
• 2016

A change in chemical compositions of Asian dust (AD) particles can dramatically alter their optical properties, cloud-forming properties, and health effects. The present study was undertaken to evaluate this aging of AD particles by means of two complementary methods (i.e., the traditional spot test and the most advanced micro-PIXE analytical technique) for single particle analysis. Size-classified particles were sampled at the rural peninsula of Korea (Byunsan, 35.37N; 126.27E) during AD event and non-AD period in 2004. Sulfate was principally enriched on the particles in the size range of $7.65-10.85{\mu}m$ collected during AD event. The average number fraction of coarse particles ($>2.05{\mu}m$) containing chloride was 16.2% during AD event. Relatively low particles containing nitrate compared to those containing sulfate and chloride were found in AD event. Micro-PIXE elemental maps indicated that a large number of AD particles were internally mixed with man-made zinc. The highest peaks of EC and OC concentrations were appeared at $0.01-0.43{\mu}m$ particle aerodynamic diameter. High EC concentration in $PM_1$ was might be caused by the Saemangeum Seawall Project that was being conducted during our field measurement.

• Transactions on Electrical and Electronic Materials
• /
• 제14권1호
• /
• pp.36-38
• /
• 2013

Eight sample panels using an indium tin oxide(ITO)-coated glass substrate were fabricated, with barrier ribs formed of 55 ${\mu}m$ height and 10 ${\mu}m$ width. The upper and lower substrates were designed with the same panel condition, so a cell gap of 110 ${\mu}m$ was obtained. The charged particles in a cell consisted of $TiO_2$ (for white color) or carbon black (black color), negative or positive charge control agents, and a polymer. The average diameter of the two types of particles was commonly 10 ${\mu}m$, and their q/m value was -4.5 ${\mu}C/g$ and +4.5 ${\mu}C/g$, respectively. The electrically opposite particles mixed by an agitator were loaded into their cells by a simple particle-loading method. The discharging process proceeded at a humidity of 80% and a temperature of $30^{\circ}C$. Reflectivity was measured depending on discharging time, and a hysteresis curve by bias voltage obtained for comparison between the neutralized and non-neutralized panel, in which the superior optical property of the neutralized panel was ascertained.

• 한국응용과학기술학회지
• /
• 제19권1호
• /
• pp.56-62
• /
• 2002

Microemulsion is stable to aggregation, sedimentation, fusion and has $3nm{\sim}200nm$ of particle size which is transparent and semitransparent. The isoflavone as a derivatives of Flavone is colorless crystalline compounds. It has similar basic structure to steroid materials which is hormone that acts to skin physiological phenomenon. On this study, we tried to search and demonstrate system content rate of dermal translocation system for cosmetics using O/W type microemulsion containing isoflavone. We manufactured O/W microemulsions by phase inversion emulsification method. It's was found that POE(20) monostearate with HLB value 14 caused microemulsion to be formed, which had $4nm{\sim}18nm$ of average diameter and $3nm{\sim}33nm$ of particle size distribution. Apparent viscosities of the microemulsions have increased in proportion to add surfactant dose.

• Journal of Preventive Medicine and Public Health
• /
• 제19권1호
• /
• pp.130-136
• /
• 1986

The particle size of suspended particulates was measured by a Anderson air sampler from Mar. 1982 to Feb. 1984 in a part of Seoul. It was concluded as follows : 1) The arithmetic concentration of suspended particulates was $147.8{\mu}g/m^3$ in Spring, 136.9 in Summer, 131.9 in Autumn and 158.1 in Winter respectively. 2) The cumulative distribution of suspended particulates size in logarithmic diagram showed similar to normal log distribution. 3) The atmospheric particulate matters showed a bimodal size distribution on the base of unit particle concentrations, which divided at approximately $2{\mu}m$ in the diameter. 4) While the fine particulates less than $2.1{\mu}m\;was\;35.4{\sim}45.0%$, the coarse particulates was $55.0{\sim}64.5%$. 5) The higher the concentration of suspended particulates, the more increased the ratio of fine particulates. The higher the concentration of suspended particulates, the lower median size of suspended particulate as well. 6) The respirable dust particulates less than $4.7{\mu}m\;was\;52.2{\sim}62.9%$ in seasonal average through the 2 year samples. With the above result, air pollution concerned with public health could be evaluated and the control measures also are suggested.

• Journal of Radiation Protection and Research
• /
• 제9권2호
• /
• pp.61-66
• /
• 1984

Cellulose nitrate 의 ${\alpha}$입자비적특성(粒子飛跡特性), 특(特)히 화학부식조건(化學腐蝕條件)에 따른 ${\alpha}$입자(粒子)의 비적직경(飛跡直徑)을 중심(中心)으로 연구(硏究)하였다. Cellulose nitrate의 KOH 용액부식(溶液腐蝕)때에는 동일(同一)한 부식조건하에(腐蝕條件下)에서 NaOH 경우보다 ${\alpha}$비적직경(飛跡直徑)이 약(約) 3배(培) 크게 나타났다. 그밖에 부식시간(腐蝕時間) 및 ${\alpha}$입자(粒子)의 에너지에 따른 비적직경(飛跡直徑)의 데이타를 얻었고, ${\alpha}$입자(粒子)의 조사조건(照射條件)이 같을 때 흘루언스율(率)(fluence rate)이 부식시간(腐蝕時間)에 무관(無關)함을 알았다.

• Elastomers and Composites
• /
• 제51권2호
• /
• pp.154-160
• /
• 2016

The four different vinyl monomers in the reaction of isocyanate-terminated polyurethane prepolymer were used for the preparation of macromonomers and successfully employed in the dispersion polymerization of styrene. The chemical structures of vinyl monomer in macromonomers influenced on the polystyrene particle characteristics, such as the conversion, weight average molecular weights ($M_w$), polydispersity index (PDI), weight average diameter ($D_w$), and uniformity. The conversion of polystyrene increased with amounts of methyl group in vinyl monomer. Also the uniformity of polystyrene particles increased with amounts of methyl group in vinyl monomer.

• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.71-77
• /
• 2012

Cellulose nanowhisker (CNW) isolated from hardwood bleached kraft pulp (HW-BKP) using sulfuric acid hydrolysis was suspended in polyvinyl alcohol (PVA) and electrospun into composites nanofibers. Transmission electron microscopy (TEM) revealed the CNW to be rod-like, approximately of $16.1{\pm}4.6$ nm wide and $194{\pm}61$ nm long, providing an aspect ratio of about 12, with a particle size distribution range of $662.2{\pm}301.2$ nm. Uniform and high quality CNW/PVA composite nanofibers were successfully manufactured by the electrospinning method. As the CNW loading increases, the viscosity of CNW/PVA solutions shows a minimum at 1% CNW level which subsequently results in the smallest diameter (193 nm) of electrospun nanofibers. The average diameter of the nanofibers increased up to 284 nm with increasing CNW loading. These results suggest that the electrospinning method provides a great potential of manufacturing consistent and reliable nanofibers from CNW/PVA solution for the formation of scaffolds with potentials in future application.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.19.2-19.2
• /
• 2010

Printed electronics using printing process has broadened in all respects such as electrics (lighting, batteries, solar cells etc) as well as electronics (OLED, LCD, E-paper, transistor etc). Copper is considered to be a promising alternative to silver for printed electronics, due to very high conductivity at a low price. However, Copper is easily oxidized, and its oxide is non-conductive. This is the highest hurdle for making copper inks, since the heat and humidity that occurs during ink making and printing simply accelerates the oxidation process. A variety of chemical treatments including organic capping agents and metallic coating have been used to slow this oxidation. We have established synthetic conditions of copper nanoparticles (CuNPs) which are resistant to oxidation and average diameter of 20 to 50nm. Specific resistivity should be less than $4\;{\mu}{\Omega}{\cdot}cm$ when sintered at lower temperature than $250^{\circ}C$ to be able to apply to conductive patterns of FPCBs using ink-jet printing. Through this study, the parameters to control average diameter of CuNPs were found to be the introduction of additive agent, the feeding rate of reducing agent, and reaction temperature. The CuNPs with various average diameters (58, 40, 26, 20nm) could be synthesized by controlling these parameters. The dispersed solution of CuNPs with an average size of 20 nm was made with nonpolar solvent containing 3 wt% of binder, and then coated onto glass substrate. After sintering the coated substrates at $250^{\circ}C$ for 30 minutes in nitrogen atmosphere, metallic copper film resulted in a specific resistivity of $4.2\;{\mu}{\Omega}{\cdot}cm$.

• Elastomers and Composites
• /
• 제47권1호
• /
• pp.43-53
• /
• 2012

물을 반응매체로 하고 스티렌과 부틸메타크릴레이트 (BMA)를 단량체로 하여 $65^{\circ}C$에서 $95^{\circ}C$ 사이의 선택된 온도에서 현탁중합을 실시하였다. 소수성 실리카를 안정제로, azobisisobutyronirile (AIBN)을 개시제로 선택하였다. 안정제의 최적 분산은 pH 10에서 이루어졌으며 반응은 pH 7에서 진행하였다. TGA 및 EDS 측정으로 사용한 실리카의 90%는 안정제로 10%는 입자 내로 유입되는 것으로 분석되었다. 안정제의 농도가 증가할수록 평균입경은 감소하였다. 분자량은 안정제의 농도가 1.67 wt%에 이르며 증가하였다. 개시제의 농도 및/혹은 반응온도의 상승에 따라 반응속도는 증가하였으나 분자량은 감소하였다. 입자의 입경은 개시제의 농도 및 반응온도에 거의 무관하였다. BMA의 비가 증가하면서 유리전이온도는 감소하였으며 불규칙한 형상의 입자가 증가하였다. 카본블랙을 함유하는 스티렌/BMA의 중합반응은 반응완료에 보다 많은 시간이 소요되었다. 소수성 실리카를 안정제로 하는 현탁중합반응을 이용하여 카본블랙을 함유하는 평균입경이 $1-30{\mu}m$의 구형 폴리(스티렌-BMA) 공중합체 복합체 입자를 합성할 수 있다는 사실을 확인하였다.