• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.1
• /
• pp.77-81
• /
• 2001

The effects of dietary protein and lysine levels on lactating multiparous sows and litter performance were studied. Sixty-two crossbred multiparous sows ($Landrace{\times}Yorkshire$) were used. Thirty-three and twenty-nine sows were studied in their second parity and third parity respectively. The three dietary treatments were: (1) the control diet containing 15% CP and 0.75% lysine, (2) a diet containing 13% CP and 0.75% lysine (0.60% natural+0.15% synthetic), and (3) a diet containing 13% CP and 0.60% lysine. They were fed twice daily and allowed ad libitum access to food and water throughout a 28 day lactation from parturition until weaning. The results of this experiment showed that body weight and backfat losses of the sows from farrowing to weaning were significantly affected (p<0.01) by reducing dietary protein. Neither average daily feed intake nor weaning to estrus interval of sows were significantly different among treatments. Supplementing lower dietary protein with synthetic lysine could mitigate backfat losses, but could not prevent body weight losses in lactating multiparous sows. A corn-soybean meal diet containing 13% crude protein and 0.60% lysine did not significantly affect litter size and survival rate of weanling piglets compared with the 15% crude protein diet. There was a tendency towards decreased piglet weight at weaning (p<0.10) and reduced daily gain of piglets (p<0.11) when the multiparous sows were fed the 13% protein diet during lactation. We found a severe loss of body weight and backfat when reducing dietary protein for lactating multiparous sows.

• Ocean and Polar Research
• /
• v.30 no.1
• /
• pp.11-19
• /
• 2008

Incubation routine and sex role of Streaked Shearwaters Calonectris leucomelas at Sasudo Island, in Jeju, South Korea, were studied during the incubation period, June to August in 2002. Incubation routine in Procellariiformes represents a sequence of alternating shifts taken in turn by female and male in a species-specific pattern. Hence, coordination of individual incubation rhythms between partners is crucial for successful breeding attempt. In Streaked Shearwaters, incubation routine represents a sequence of alternating shifts taken in turn by male and female. The first incubation shift was made by male after female had laid the egg. The mean incubation period was 50.8 days until hatching. Males had spent on average 26.5 days incubating and females 24.3 days accordingly. The mean duration of incubation shifts decreased progressively from 6th and 7th shift to hatching. Overall, males had spent more time incubating than females during the incubation period, but the mean duration of the incubation shift 5.6 days for males and 5.7 days for females did not differ between males and females. There were no effect of the body size of the breeding pair on incubation performance. For males the mean of body weight decreased during the incubation, whereas for females it remained approximately stable. In Streaked Shearwaters, the duration of incubation shift and subsequent foraging trip are related to loss of body weight during the period of fasting. In addition, coordination of individual incubation rhythms affects their incubation behaviour.

• Applied Microscopy
• /
• v.12 no.2
• /
• pp.35-44
• /
• 1982

The fat bodies of cabbage worm (Pieris rapae) and silk worm (Bomyx mori) during metamorphosis was comparatively studied by electron microscope. 1. Cell oranelles: Golgi apparatus were not observed in both species. It is observed that RER of cabbage worms initiate to degenerate in prepupa stage with complete degeneration at adult stage, while that of silk worms shows similar degenerative pattern. However, mitochondria of cabbage worms are transformed into autophagic vacuole from prepupa stage until adult stage whereas those of silk worm shows a decrease in number in prepupa stage but maintains a certain level until adult stage. 2. Storage substance in cell: Lipid droplets in cabbage worms were observed to increase in numbers during larval stage but afterward decrease in number with an enlargement in size. However immediately after their pupal stage, they almost disappear. On the contrary lipid droplets in silk worms show rather increase in number until adult stage. Protein storage granules in bothspecies were arised from autophagic vacuoles(lysosome) . Fat cells of cabbage worm in adult stage turn out to be residual bodies which last until final stage, but those of silk worm rapidly decrease. Glycogen particles in both species reach maximum at last larval instar and thee gradually decrease thereafter. 3. Fat body sheath: The average width of fat body sheath was measured to be $0.2{\mu}m$ and $0.6{\mu}m$ and surface of fat cells adjacent to fat body sheath in silk worm is heavily infolded.

• Parasites, Hosts and Diseases
• /
• v.34 no.3
• /
• pp.161-168
• /
• 1996

We observed the morphological characteristics and identified the species of gnathostome larvae obtained from the imported Chinese loaches. The early third-stage larvae ($EL_3$) were collected from viscera of the loaches and a part of them were infected to mice. The advanced third-stage larvae ($AdL_3$) were recovered from the mice at 4 weeks post-infection. both larval worms were fixed loth 10% formalin, cleared in alcohol-glycerin solution, mounted with glycerin-jelly, and observed. A total of 369 $EL_3$ were collected from viscera of 9,493 Chinese loaches. The whole body of $EL_3$ was covered with about 190 transverse rows of minute cuticular spines and $0.624{\;}{\times}{\;}0.101{\;}mm$ in average size. A pair of lips were protruded at the anterior end, and the muscular esophagus and brownish intestine were followed. The characteristic head bulb was provided with 4 rows of hooklets. The average number of hooklets in the respective row was 36.7, 39.5, 41.6 and 44.3 posteriorly $AdL_3$ was $2.660{\;}{\times}{\;}0.346{\;}mm$ in average size, and retained the esophagus (about 0.755 mm length) and cervical sac (about 0.355 mm length). The average number of hooklets in the respective row on the head bulb was 39.0, 41.9, 43.9 and 45.6, posteriorly. On the basis of the morphological characteristics, they were identified as the third-stage larvae of Gnathostomc hispinun.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.11
• /
• pp.1338-1349
• /
• 2003

The color of apparels has the close interdependency on the skin colors of the wearers. This study was carried out to group the skin colors of Korean males into several similar skin colors and to analyze their preference colors. The skin colors were measured quantitatively and classified into several clusters that has similar hue, value and chroma with Munsell color system that is internationally used to communicate the colors. Sample size was 420 Korean males. With color spectrometer, JX-777, 4 points of the body were measured. All subjects had been shown with 40 color chips and answered their preference colors. Data were analysed by K-means Cluster analysis, Duncan test, Frequency and Chi square test using SPSS WIN 10 statistical package. Findings were as follows: 1. The skin colors of Korean males were mixed with skin colors of YR, R, and Y. 2. 420 subjects who have YR color were clustered in 3 kinds of skin color groups. 3. The average face color of total subjects was 4.81YR 5.91/4.97 in Munsell color system, 60.74 in L value, 13.71 in a value, 24.54 in b value. 136 observations out of 420 subjects were composed of Type 1: 4.50YR 6.35/4.87 and 192 observations were composed of Type 2: 4.62YR 5.86/5.12 and 92 observations were composed of Type 3: 5.67YR 5.37/4.79. 4. The average skin color of total 420 subjects was 6.26YR 6.07/4.41 and 62.33 in L value, 10.64 in a value, 23.48 in b value. The average skin color of Type 1 was 6.27YR 6.44/4.27 and of Type 2 was 6.15YR 5.91/4.49 and of Type 3 was 6.49YR 5.84/4.43 respectively. 5. 3 groups showed that the most preference color of sport$.$casual was 2.5Y 8/16 and 7.5PB 4/16 and the most preference color to their skins was 7.5PB 4/16 and 7.5YR 7/16.

• Journal of Acupuncture Research
• /
• v.18 no.6
• /
• pp.171-187
• /
• 2001

Objective : Moxibustion has been proved efficacious for many diseases, but isn't widespread in the clinics due to a danger of skin burning, the smoke produced while burning a moxa combustion and so on. Therefore, another type of moxa that can be resolved these troubles is required. To improve the effect of moxibustion and develop the new thermal stimulating treatment, the performance of commercial moxibustion widely used are studied systematically and found out quantitatively. Methods : We have selected two types (small-size moxa A(sMA), small-size moxa B (sMB)) among small-size moxaes used widely in the clinic. We examined combustion time, various temperatures, temperature gradient in each period during a combustion of moxa. Results : 1. The combustion time in the preheating period appeared somewhat longer in sMA than in sMB. 2, The combustion time in the heating period appeared longer in sMA by 26% than in sMB. 3. The average temperature in the heating period was $37.6{\sim}37.8^{\circ}C\;in\;sMA\;and\;36.2{\sim}36.8^{\circ}C$ in sMB and the maximum temperature measured at a center of contact surface in sMA was $48.6^{\circ}C$, higher by over $2.8^{\circ}C$ than that of sMB moxibustion. 4. The average ascending temperature gradient in the heating period was $0.08{\sim}0.1^{\circ}C/sec$ in both moxaes, and the average ascending temperature gradient of heating period in sMB appeared larger. The maximum ascending temperature gradient appeared higher in sMB, and the time reaching maximum ascending temperature gradient appeared much earlier in sMA than in sMB. 5. The combustion time in the retaining period was around 100 sec in sMA and around 275 sec in sMB. 6. The average temperature in the retaining period was $42.2{\sim}46.0^{\circ}C\;in\;sMA\;and\;39.3{\sim}41.4^{\circ}C/sec$ in sMB. The minimum temperature in the retaining period was over $38.80^{\circ}C$ in sMA but just $34.7^{\circ}C$ in sMB. 7. The average descending temperature gradient in sMA was $-0.050{\sim}0.067^{\circ}C/sec$ and in sMB was $-0.030{\sim}0.037^{\circ}C/sec$ 8. The combustion time in the cooling period appeared longer over two times in sMA than in sMB, and the time which the cooling period (minimum temperature) finished at appeared later in sMB by 55 sec. 9. We classified the combustion process that the measured temperature rose over body heat($37^{\circ}C$) into the effective combustion period. The effective combustion time was 233.3 sec in sMA and 300.4 sec in sMB respectively, and was longer by about 29% in sMB. The average temperature and maximum temperature in the effective combustion time appeared higher in sMA. The time taken until the maximum temperature was reached was 225.1 sec in sMA and 244.5 sec in sMB, faster by about 20 sec in sMA. The maximum ascending temperature gradient during the effective combustion period appeared larger about 1.4 times in sMB, but the time when the maximum ascending temperature gradient happened was faster in sMA. Conclusion : It appears that sMB, compared with sMA, is proper if necessary to apply the long time and weak stimulus, because of the gentle stimulus during the relatively longer time. In contrast, sMA that the symmetrical combustion happened is proper if necessary to apply the short time and strong stimulus.

• Korean Journal of Poultry Science
• /
• v.46 no.1
• /
• pp.25-30
• /
• 2019

This study was conducted to investigate basic data of development for appropriate management system in broiler. Data such as ages at marketing, livability, body weight, etc. were collected from a total of 53 broiler farms located in Chungnam, Chungbuk, Jeollanam, Jeollabuk, Gyeongbuk. 1. Average of ages at marketing were 32 days. Those of windowless house and open-type house were 31.96 and 32.03 days, respectively. The significant difference among four seasons was highly found (P<0.001). The longest ages at marketing were 32.86 days in winter. Average of livability was 96.25%. According to type of chick house, those of windowless house and open-type house were 95.93% and 96.59%, respectively. The livability according to season showed significant difference (P<0.05). The highest livability was 97.39% in autumn. However, the lowest livability was 95.36% in summer. 2. Average body weight at marketing was 1.62 kg. The significant difference was found in marketing weight by season (P<0.05). The heaviest body weight was 1.65 kg in winter, but the lowest weight was 1.60 kg in summer. Average of FCR was 1.62. the significant differences according to the season were highly found (P<0.01). Especially, the best FCR was 1.59 in autumn. Average cycles of marketing was 5.70. The significant differences according to farms size were found (P<0.05), cycles of small farms and big farms were 5.8 and 5.3, respectively. The ages at marketing were highly correlated with marketing weight (r=0.684) and feed conversion (r=0.439). The correlation between feed conversion and livability was highly negative (r=-0.614). According to the above result, livability and body weight at marketing were badly detected in summer. In conclusion, broiler farms should be controlled through properly environmental management system for improvement of performances.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.5
• /
• pp.341-358
• /
• 1992

In order to estimate energy budgets of Palaemon macrodactylus, larvae of the shrimp were reared in the laboratory at constant conditions $(25^{\circ}C: 31-32\%o),$ and then juvenile to adult of the shrimp were reared at $15^{\circ}C\;and\;25^{\circ}C$ in the laboratory. Energy used by the reared shrimps were calculated from estimates of data on feeding, growth, molting, metabolism, nitrogen excretion, and energy content. Juveniles and adults reared in the laboratory, which fed on Artemia nauplii, had an average daily growth rates of 0.079 mm/day at $15^{\circ}C\;and\;of\;0.122mm/day\;at\;25^{\circ}C$. The average growth factor* of P. macrodactylus males and females ranged from $3.2\%$ for adult to $13.2\%$ for juveniles individuals, respectively. Intermolt periods were related to body size of the shrimp and to temperature. Average laboratory growth curves were calculated from data on growth factors and intermolt periods to body size of the shrimp at $15^{\circ}C\;and\;25^{\circ}C$. The calorie contents of the shrimp, their molts, eggs and larvae were determined by biochemical composition and oxygen bomb calorimetry. The average amount of energy used in growth for larvae and juvenile to adult were 4.94 cal and 4.55 cal per dry weight in milligram, respectively. The ammount of oxygen used in metabolism was calculated from size, temperature-specific respiration rate. To convert the ammount of oxygen used in respiration into the equivalent energy lost heat was estimated from the data on chemical composition for the larvae and adult, the values was 4.58 cal/ml $O_2$. The energy content per egg was 0.078 cal. The assimilation efficiency estimated by nitrogen content of food and egested faeces gave $61.5\%$ for the larvae. The efficiencies for juvenile to adult ranged between $79.4\%$ and $90.1\%$ The gross growth efficiencies $(K_1)$ and net growth efficiencies $(K_2)$ of P macrodactylus showed $18.33\%\;and 32.63\%$ for total larval stages, ranged from $21.30\%\;to\;31.04\%\;and\;from\;30.03\%\;to\;39.34\%$ for juvenile to adult, respectively.

• Fashion & Textile Research Journal
• /
• v.21 no.6
• /
• pp.800-812
• /
• 2019

Secondary diseases that occur during the rehabilitation of breast cancer survivors are factors that can negatively change the physical and psychological state of the patient. The rehabilitation after treatment of breast cancer survivors is an important process to prevent cancer recurrence and increase the survival rate because a negative psychological state significantly impacts the long-term survival rate. This study identifies user requirements for the development of functional bras for mastectomy patients in Korea. Participants included 133 patients with one or more breasts removed due to breast cancer and an average age of 53.2 years (53.21 ± 7.57 years, minimum 33 years, maximum 69 years). Women in their 50s had the highest participation rate of 48.9%. Most maintained the same bra size before surgery; however, some experienced changes in bra size because they are not irritated by wounds caused by surgery. Therefore, it is important to pay attention to material when designing a functional bra because it can irritate the surgical site. Only about 41.4% of bras were worn by breast cancer patients because of price burden and lack of education, not complaints related to clothing design and wearability or body shape. Most purchases at hospitals or medical institutions require consultation with a specialist who provides information about a bra mainly at the hospital. The most important considerations when buying a breast cancer bra were size, fit and shape stability.

• Korean Journal of Materials Research
• /
• v.23 no.12
• /
• pp.722-726
• /
• 2013

Freeze drying of a porous Cu-Sn alloy with unidirectionally aligned pore channels was accomplished by using a composite powder of CuO-$SnO_2$ and camphene. Camphene slurries with CuO-$SnO_2$ content of 3, 5 and 10 vol% were prepared by mixing with a small amount of dispersant at $50^{\circ}C$. Freezing of a slurry was done at $-25^{\circ}C$ while the growth direction of the camphene was unidirectionally controlled. Pores were generated subsequently by sublimation of the camphene during drying in air for 48 h. The green bodies were hydrogen-reduced at $650^{\circ}C$ and then were sintered at $650^{\circ}C$ and $750^{\circ}C$ for 1 h. XRD analysis revealed that the CuO-$SnO_2$ powder was completely converted to Cu-Sn alloy without any reaction phases. The sintered samples showed large pores with an average size of above $100{\mu}m$ which were aligned parallel to the camphene growth direction. Also, the internal walls of the large pores had relatively small pores. The size of the large pores decreased with increasing CuO-$SnO_2$ content due to the change of the degree of powder rearrangement in the slurry. The size of the small pores decreased with increase of the sintering temperature from $650^{\circ}C$ to $750^{\circ}C$, while that of the large pores was unchanged. These results suggest that a porous alloy body with aligned large pores can be fabricated by a freeze-drying and hydrogen reduction process using oxide powders.