• 한국농공학회지
• /
• 제39권4호
• /
• pp.55-63
• /
• 1997

Constructed wetland system which can be applied to the rural wastewater treatment system was examined by pilot plant in Kon-Kuk University. Hydraulic loading rate of wastewater was about 0.16m$^3$/m$^2$. day and theoretical detention time in the system was 1.38 days. The effluent of the septic tank for the school building was applied as inflow to the system. The influent concentration of DO was zero but effluent was up to 4.37mg/${\ell}$ which implies that oxygen was supplied enough from atmosphere by reaeration to support biological activity of the system. Average influent concentration of BOD was 104mg/${\ell}$ and effluent was 24mg/${\ell}$ with average removal rate of 76%. Average influent concentration of COD was 215mg/${\ell}$ and effluent was 63mg/${\ell}$ with average removal rate of 70 % . Average influent concentration of SS was 78mg/${\ell}$ and effluent was 10mg/${\ell}$ with average removal rate of 87%. Two components, BOD and SS, are regulated by law to keep maximum water quality standard of 80mg/${\ell}$ when daily outflow rate is less than 100$m^3$/day which is the case of most rural communities. Therefore, the results from the experiment showed that constructed wetland system can meet the water quality standard easily. Average influent concentration of total nitrogen was 165mg/lwhich is relatively higher than normal wastewater, and effluent was about 156mg/${\ell}$ with average removal rate of only 6%. Average influent concentration of total phosphorus was 41 mg/${\ell}$ and effluent was 6mg/${\ell}$ with average removal rate of 87%. Overall, constructed wetland system was thought to be effective to treat wastewater if nitrogen removal mechanism is improved. Considering low cost, less maintenance, and high treatability, this system can be a practical alternative for the wastewater treatment in rural area The experiment was performed during the summer and fall season, and treatment efficiency of the system is expected to decrease in low temperature. therefore, further study including temperature is required to evaluate feasibility of the system more in detail.

• 한국농공학회지
• /
• 제33권2호
• /
• pp.120-129
• /
• 1991

This study refers to temporal variation of physical properties of tilled soil under natural rainfalls. Field measurements of porosity, average hydraulic conductivity and average capillary pressure head on a tilled soil were conducted by soil sampler and air-entry permeameter respectively at regular intervals after tillage. Temporal variation of these physical properties were analysed by cumulative rainfall energy since tillage. Field experiment was conducted on a sandy loam soil at Suwon durging April~July in 1989. The followings are a summary of this study results ; 1. Average porosity just after tillage was 0.548cm$^3$/cm$^3$. As cumulative rainfall energy were increased in 0.1070, 0.1755, 0.3849 J/cm$^2$, average porosity were decreased in 0.506, 0.4]95, 0.468m$^3$/cm$^3$ respectively. 2. Average hydraulic conductivity just after tillage was 45.42cm/hr. As cumulative rainfall energy were increased in 0.1755, 0.2466, 0.2978, 0.3849J/cm$^2$ average hydraulic conductivity were decreased in 15.34, 13.47, 9.58, 8.65cm/hr respectively. 3. As average porosity were decreased in 0.548, 0.506, 0.495, 0.468cm$^3$/cm$^3$ average capillary pressure head were increased in 6.1, 6.7, 6.9, 7.4cm respectively. 4. It was found that temporal variation of porosity, average hydraulic conductivity on a tilled soil might be expressed as a function of cumulative rainfall energy and average capillary pressure head might be expressed as a function of porosity. 5. The results of this study may be helpful to predict infiltration into a tilled soil more accurately by considering Temporal variation of physical properties of soil.

• 환경위생공학
• /
• 제10권1호
• /
• pp.25-34
• /
• 1995

A Study on environmental Investigation in Imha Dam for the finding the degree of water quality and heavy metals was carried out at 4 sampling station during the period from August 15, 1993 to May 7, 1994. The results were as follows. 1. The ranges of values of pH for water were st. 1-7.56, st.2-7.77, st.3-7.9, st.4-7,7 on the average. Total average of pH values were 7.56-7.9 2. The ranges of values of DO for water were st.1-8.71($mg/{\ell}$), st.2-8.64($mg/{\ell}$), st.3-10. 25($mg/{\ell}$), st.4-9.01($mg/{\ell}$) on the average. Total average of DO of values were 8.64-10.25($mg/{\ell}$). 3. The ranges of values of BOD for water were st.1-1.1($mg/{\ell}$), st.2-1.0($mg/{\ell}$), st.3-0 86($mg/{\ell}$), st.4-0.99($mg/{\ell}$) on the average. Total average of BOD of values were 0.86-1.1($mg/{\ell}$). 4. The ranges of values of COD for water were st.1-1.12($mg/{\ell}$), st.2-1.4($mg/{\ell}$), st.3-0 98($mg/{\ell}$), st.4-1.46($mg/{\ell}$) on the average. Total average of COD of values were 0.98-1.46($mg/{\ell}$). 5, The ranges of values of T- N for water were st.1-0.36($mg/{\ell}$), st.2-0.49($mg/{\ell}$), st.3-0 23($mg/{\ell}$), st.4-0.83($mg/{\ell}$) on the average. Total average of T-N of values were 0.23-0.83($mg/{\ell}$). 6. The ranges of values of T-P for water were st.1-0.053($mg/{\ell}$), st.2-0.06($mg/{\ell}$), st.3-0.02($mg/{\ell}$), st.4-0.07($mg/{\ell}$) on the average. Total average of T-P of values were 0.02-0.07($mg/{\ell}$). 7. In the E. soli group distribution were counted st.1-1130, st.2-1113, st.3-152.3, st.4-1253 by the MPN test. Total distribution of E. soil group were 152.3-1253. 8. The concentration of heavy metals of Cu, Mn, Pb, Zn were measured st.1-0.59, 0.18, 0 04, 74.6( ${\mu}g/{\ell}$), st.2-0.39,0.29,0.03, 54.3(${\mu}g/{\ell}$), st.3-0.1,0.3, ND, 8(${\mu}g/{\ell}$), st.4-0.96, 0 26,0.23,45.6(${\mu}g/{\ell}$) on the average. Cd, Hg, Cr were not detected in the sampling site.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권2호
• /
• pp.217-223
• /
• 1996

In order to evaluate the changes before and after secondary operations in the patients with cleft lip objectively using full face photographs, the author analyzed results of improvement on nasal width and mouth width and asymmetry of nostril. 1. The ration of asymmetry of thenostril is changed from average 1.24 preoperatively to average 1.08 postoperaively : 61.2% is improved postoperatively. 2. The ratio of nasal width compared with intermedial canthal distance is changed from average 1.15 preoperatively to average 1.10 postoperatively : 3.8% is reduced posteroperatively. 3. The ratio of mouth width compared with intermedial canthal distance is changed from average 1.08 preoperatively to average 1.03 postoperathvely : 4.1% is reduced posteroperatively.

• 한국환경보건학회지
• /
• 제22권1호
• /
• pp.12-20
• /
• 1996

This study was carried out to investigate the change of average .specific resistance according to suspension concentration for study phenomena occurring during filtration period. As the results of this study, the following conclusions were obtained. The average specific resistance in 1% $CaCO_3$ suspension was showed power function(R=0.99), whereas in TOYO 5C and TOYO 5A paper were made little difference under high pressure. It represented from results that filtration theory in concord with cake filtration was no affected the average specific resistance of filter medium in cake filtration. In case of 0.1% $CaCO_3$ suspension filtration, the TOYO 5C was showed power function, whereas in TOYO 5A paper differently. In the present study, the $P_1$ value was calculated from the average specific resistance by filtration method. Therefore, $P_1$ value were $1.68\times 10^4Pa$, $4.05\times 10^3Pa$, and $3.15\times 10^3Pa$ in $5.3\times 10^4Pa$, $1.3\times 10^4Pa$, and $8.2\times 10^3Pa$, respectively. We concluded that propriety of new filtration theory was also proved.

• 한국환경보건학회지
• /
• 제12권1호
• /
• pp.69-78
• /
• 1986

In order to determine the content levels of trace metals in cow's milk, 79 market milk samples were collected from markets in major cities of Korea from July to August, 1985 and analyzed for content levels of Cu, Fe, Zn, Mn, Pb, Cd. The Results were as follows Cu, average 43.5 $\mu$g/l range 14 ~ 172.7 $\mu$g/l Fe, average 398.4 $\mu$g/l range 35 ~ 1,873 $\mu$g/l Zn, average 2.917 mg/l range 1.233 ~ 7.46 mg/l Mn, average 26.74 $\mu$g/l range 7.6 ~ 102 $\mu$g/l Pb, average 33.9 $\mu$g/l range N.D. ~ 105 $\mu$g/l Cd, average 1.73 $\mu$g/l range N.D. ~ 5.4 $\mu$g/l

• 한국주조공학회지
• /
• 제9권4호
• /
• pp.327-335
• /
• 1989

The matrix structure and the morphology of CV graphite are affected by the addition of many kinds of elements, which are contained in the CV graphite cast iron, additives, fading time and cooling rate. The effects of cooling rate on the matrix structure, the shape of CV graphite, mechanical properties and propagation of ultrasonic wave in hypoeutectic CV graphite cast iron were studied. When the diameters of the samples are 50mm, 35mm and 20mm 1. CV graphite number showed average 17.9% increase and CV graphite length showed 10.3% decrease with decreasing diameter of the samples. 2. The amount of graphite and ferrite showed average 11.2, 4.1 % decrease and the amount of pearlite showed average 15.7% increase. 3. Hardness and tensile strength showed average 3.5%, 11.3% increase and impact strength showed average 1.5% decrease. 4. Ultrasonic wave velocity showed average 1.1% increase.

• 한국주조공학회지
• /
• 제9권4호
• /
• pp.336-344
• /
• 1989

The matrix structure and the morphology of CV graphite are affected by the addition of many kinds of elements, which are contained in the CV graphite cast iron, additives, fading time and cooling rate. The effects of cooling rate on the matrix structure, the shape of CV graphite, mechanical properties and propagation of ultrasonic wave in eutectic CV graphite cast iron were studied. When the diameters of the samples are 50mm, 35mm and 20mm 1. CV graphite number showed average 13.8% increase and CV graphite length showed 12.3% decrease with decreasing diameter of the samples. 2. The amount of graphite and ferrite showed average 10.6, 4.3% decrease and the amount of pearlite showed average 23.4% increase. 3. Hardness and tensile strength showed average 3.2%, 9.5% increase and impact strength showed average 1.3% decrease. 4. Ultrasonic wave velocity showed average 1.1% increase.

• 전자공학회논문지B
• /
• 제33B권7호
• /
• pp.107-115
• /
• 1996

The average distortio of the vector quantizer is calcualted using a probability function F of the input source for a given codebook. But, since the input source is unknown in geneal, using the sample vectors that is realized from a random vector having probability function F, a time-average opeation is employed so as to obtain an approximation of the average distortion. In this case the size of the smple set should be large so that the sample vectors represent true F reliably. The theoretical inspection about the approximation, however, is not perfomed rigorously. Thus one might use the time-average distortion without any verification of the approximation. In this paper, the convergence characteristics of the time-average distortions are theoretically investigated when the size of sample vectors or the size of codebook gets large. It has been revealed that if codebook size is large enough, then small sample set is enough to obtain the average distortion by approximatio of the calculated tiem-averaged distortion. Experimental results on synthetic data, which are supporting the analysis, are also provided and discussed.

• 전력전자학회논문지
• /
• 제19권3호
• /
• pp.290-296
• /
• 2014

This paper presents a design strategy for the control of the Z-source inverter (ZSI). For the Z-network capacitor voltage control, the average current model is derived to describe the dynamics of the voltage control and the controller outputs the average current command for the capacitor. Z-network inductor current reference is derived from the average current model of the Z-network capacitor. The inner current control loop outputs the average voltage command for the Z-network inductor and the shoot-through duty ratio of the ZSI is calculated from the output using the average voltage model of the Z-network inductor. The gain values of the current and voltage controllers are directly obtained by the Z-network parameters and desired bandwidth of each controller without a gain tuning process.