• 제목/요약/키워드: avalanche

검색결과 219건 처리시간 0.034초

Epoxy 복합체의 절연 신뢰도 해석 (Analysis of Insulating Reliability in Epoxy Composites)

  • 임중관;천민우;박용필
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2001년도 추계종합학술대회
    • /
    • pp.724-728
    • /
    • 2001
  • 본 연구에서는 에폭시 수지를 시료로 선정, 5 종의 배합비로 제작한 시편에 대해 절연 파괴 실험을 하여 얻어진 데이터를 수명 평가나 파괴 통계에서 주로 활용하는 와이블 분포식을 이용, 임의의 허용 파괴 확률에서의 허용인가 전계값을 추정, 안전성을 판단하기 위해 경년 열화데이터의 통계 처리 방법을 제안하였다. 그 결과, 경화제 비율이 증가하면 에폭시 경화물의 에스터화로 인해 가교 밀도가 증가함으로써 저온에서의 파괴 강도가 높아졌으며, 유리 전이 온도(Tg) 영역인 11$0^{\circ}C$ 부근에서는 분자 운동이 활발해짐으로써 급격히 파괴 강도가 저하하였다. 또한, 충진제를 첨가한 경우 접합 계면에 전자가 가속되어 전반적인 파괴 강도는 무충진에 비해 낮게 나타났으며, 실란 처리를 한 경우에는 계면 접합 상태가 개선되어 충진제만을 첨가한 시료보다 좋은 절연성을 나타냈다. 와이블 분포의 분석으로 부터 기기 절연의 허용 파괴 확률을 0.1 % 이하로 낮추기 위해서는 허용인가 전계값이 21.5 ㎹/cm 이하가 되어야함을 알 수 있었다.

  • PDF

DC 절연파괴 특성을 이용한 Epoxy 복합체의 전기적 열화 평가 (Evaluation of Electrical Degradation in Epoxy Composites by DC Dielectric Breakdown Properties)

  • 임중관;박용필
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2002년도 추계종합학술대회
    • /
    • pp.779-783
    • /
    • 2002
  • 변성기용 절연 재료로 사용되는 에폭시 수지를 시료로 선정, 5종의 배합비로 제작한 시편에 대해 절연 파괴 실험을 하며, 얻어진 데이터를 와이블 분포식을 이용, 경년 열화(經年劣和) 데이터의 통계 처리 방법을 제안하였다. 경화제 비율이 증가하면 에폭시 경화물의 에스터화로 인해 가교 밀도가 증가함으로써 저온에서의 파괴 강도가 높아졌으며, 유리 전이 온도(Tg) 영역인 11$0^{\circ}C$ 부근에서는 분자 운동이 활발해짐으로써 급격히 파괴 강도가 저하하였다. 또한, 충진제를 첨가한 경우 접합 계면에 전자가 가속되어 전반적인 파괴 강도는 무충진에 비해 낮게 나타났으며, 실란 처리를 한 경우에는 계면 접합 상태가 개선되어 충진제만을 첨가한 시료보다 좋은 절연성을 나타냈다. 와이블 분포의 분석으로부터 기기 절연의 허용 파괴 확률을 0.1% 이하로 낮추기 위해서는 허용인가 전계값이 21.5 MV/cm 이하가 되어야함을 알 수 있었다.

  • PDF

전열화학추진용 2.4MJ 펄스파워전원의 설계와 동작특성(I) (Design and Operation Characteristics of 2.4MJ Pulse Power System for Electrothermal-Chemical(ETC) Propulsion(I))

  • 진윤식;이홍식;김종수;조주현;임근희;김진성;추증호;정재원;황동원
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 C
    • /
    • pp.1868-1870
    • /
    • 2000
  • As a drive for an ETC (Electro-thermal Chemical) launcher, a large pulse power system of a 2.4MJ energy storage was designed, constructed and tested. The overall power system consists of eight capacitive 300kJ energy storage banks. In this paper we describe the design features, setup and operation test result of the 300kJ pulsed power module. Each capacitor bank of the 300kJ module consists of six 22kV 50kJ capacitors. A triggered vacuum switch (TVS-43) was adopted as the main pulse switch. Crowbar diode circuits, variable multi-tap inductors and energy dumping systems are connected to each high power capacitor bank via bus-bars and coaxial cables. A parallel crowbar diode stack is fabricated in coaxial structure with two series 13.5kV, 60kA avalanche diodes. The main design parameters of the 300kJ module are a maximum current of 180kA and a pulse width of 0.5 - 3ms. The electrical performances of each component and current output variations into resistive loads have been investigated.

  • PDF

전치 등화기와 광학설계를 이용한 가시광통신 전송 용량 및 거리 향상 연구 (Performance Improvement for Visible Light Communications Using Pre-Equalizer and Optical Design)

  • 권도훈;양세훈;김현승;손용환;한상국
    • 한국통신학회논문지
    • /
    • 제39C권6호
    • /
    • pp.476-481
    • /
    • 2014
  • 본 논문에서는 가시광 통신의 광원으로 사용되는 백색 LED (Light Emitting Diode)의 변조 대역폭 확장을 위해 송신단에 전치 등화기 회로를 설계하였다. 또한 청색 광 필터를 이용하여 백색 LED의 주파수 응답을 저해하는 황색 형광물질의 영향을 제거하였고 이로 인해 발생하는 신호 세기의 저하를 광학 설계를 통해 극복하였다. 이 시스템을 통해 백색 LED의 변조 대역폭을 결정하는 3 dB 대역폭을 3 MHz에서 25 MHz이상으로 향상 시켰으며 광학 설계를 통해 추가적인 신호 세기를 확보하여 전송 거리를 증가시켰다. 통신 성능 확인을 위해 LED에 NRZ-OOK (신호를 변조시켜 전송하여, APD (Avalanche Photo Diode)를 통하여 수신하였고 이를 CSA (Communication System Analyzer)와 RFSA (Radio Frequency Spectrum Analyzer)를 통해 분석하였다. 이를 통해 전치 등화기와 광학 설계를 이용하여 전송거리 4.5 m에서 30 Mbps, 1.5 m에서 50 Mbps의 신호 전송이 가능함을 실험적으로 검증하였다.

GIS 기반 확률론적 기법을 이용한 산사태 및 토석류 위험지역 분석 (Analysis of Landslide and Debris flow Hazard Area using Probabilistic Method in GIS-based)

  • 오채연;전계원
    • 한국안전학회지
    • /
    • 제27권6호
    • /
    • pp.172-177
    • /
    • 2012
  • In areas around Deoksan Li and Deokjeon Li, Inje Eup, Inje Gun, located between $38^{\circ}2^{\prime}55^{{\prime}{\prime}}N$ and $38^{\circ}5^{\prime}50^{{\prime}{\prime}}N$ in latitude and $128^{\circ}11^{\prime}20^{{\prime}{\prime}}E$ and $128^{\circ}18^{\prime}20^{{\prime}{\prime}}E$ in longitude, large-sized avalanche disasters occurred due to Typhoon Ewiniar in 2006. As a result, 29 people were dead or missing, along with a total of 37.25 billion won of financial loss(Gangwon Province, 2006). To evaluate such landslide and debris flow risk areas and their vulnerability, this study applied a technique called 'Weight of Evidence' based on GIS. Especially based on the overlay analysis of aerial images before the occurrence of landslides and debris flows in 2005 and after 2006, this study extracted 475 damage-occurrence areas in a shape of point, and established a DB by using such factors as topography, hydrologic, soil and forest physiognomy through GIS. For the prediction diagram of debris flow and landslide risk areas, this study calculated W+ and W-, the weighted values of each factor of Weight Evidence, while overlaying the weighted values of factors. Besides, the diagram showed about 76% in prediction accuracy, and it was also found to have a relatively high correlationship with the areas where such natural disasters actually occurred.

맵핑용 3차원 영상 레이저 레이다의 시스템 설계 및 성능 분석 (System Design and Performance Analysis of 3D Imaging Laser Radar for the Mapping Purpose)

  • 라종필;고진신;이창재
    • 한국군사과학기술학회지
    • /
    • 제17권1호
    • /
    • pp.90-95
    • /
    • 2014
  • The system design and the system performance analysis of 3D imaging laser radar system for the mapping purpose is addressed in this article. For the mapping, a push-bloom scanning method is utilized. The pulsed fiber laser with high pulse energy and high pulse repetition rate is used for the light source of laser radar system. The high sensitive linear mode InGaAs avalanche photo-diode is used for the laser receiver module. The time-of-flight of laser pulse from the laser to the receiver is calculated by using high speed FPGA based signal processing board. To reduce the walk error of laser pulse regardless of the intensity differences between pulses, the time of flight is measured from peak to peak of laser pulses. To get 3D image with a single pixel detector, Risley scanner which stirs the laser beam in an ellipsoidal pattern is used. The system laser energy budget characteristics is modeled using LADAR equation, from which the system performances such as the pulse detection probability, false alarm and etc. are analyzed and predicted. The test results of the system performances are acquired and compared with the predicted system performance. According to test results, all the system requirements are satisfied. The 3D image which was acquired by using the laser radar system is also presented in this article.

바이어스 스트레스에 의한 실리콘-게르마늄 이종접합 바이폴라 트랜지스터의 열화 현상 (The degradation phenomena in SiGe hetero-junction bipolar transistors induced by bias stress)

  • 이승윤;유병곤
    • 한국진공학회지
    • /
    • 제14권4호
    • /
    • pp.229-237
    • /
    • 2005
  • 바이어스 스트레스 인가 후에 발생하는 실리콘-게르마늄 이종접합 바이폴라 트랜지스터(SiGe HBT)의 열화현상을 고찰하였다. SiGe HBT가 바이어스 스트레스에 일정 시간 노출되면 소자 내부의 변화에 의하여 소자 파라미터가 원래 값으로부터 벗어나게 된다. 에미터-베이스 접합에 역방향 바이어스 스트레스가 걸리면 전기장에 의해 가속된 캐리어가 재결합 중심을 생성하여 베이스 전류가 증가하고 전류이득이 감소한다. $140^{\circ}C$ 이상의 온도에서 높은 에미터 전류를 흘려주는 순방향 바이어스 전류 스트레스가 가해지면 Auger recombination이나 avalancHe multiplication에 의해 형성된 핫 캐리어가 전류이득의 변동을 유발한다. 높은 에미터 전류와 콜렉터-베이스 전압이 동시에 인가되는 mixed-mode 스트레스가 가해지면 에미터-베이스 역방향 바이어스 스트레스의 경우와 마찬가지로 베이스 전류가 증가한다. 그러나 miked-mode 스트레스 인가 후에는 inverse mode Gummel 곡선에서 베이스 전류 증가가 관찰되고 perimeter-to-area(P/A) 비가 작은 소자가 심각하게 열화되는 등 에미터-베이스 역방향 바이어스 스트레스와는 근본적으로 다른 신뢰성 저하 양상이 나타난다.

단일모드 광섬유 집광기를 이용한 Hong-Ou-Mandel 간섭 가시도 향상 (Improvement of Hong-Ou-Mandel Interference Visibility by Using a Single-Mode Optical-Fiber Photon Collector)

  • 한성욱;김헌오;서주연;김명훈
    • 새물리
    • /
    • 제68권12호
    • /
    • pp.1374-1377
    • /
    • 2018
  • 우리는 Hong-Ou-Mandel 간섭 실험에서 95% 간섭가시도를 획득했다. 지난 연구에서 56% 가시도를 획득한 것에 비하면 획기적으로 가시도가 개선되었다. 우리는 제1형 자발적 매개 하향 변환 목적으로 제작된 ${\beta}$-Barium Borate 단결정에 405 nm 단일모드 연속 발진 레이저를 주사하여 만들어진 쌍둥이 광자쌍을 표준적인 Hong-Ou-Mandel 간섭광학계를 거치게 한 후 다이오드 기반 단일광자 계수기와 자체적으로 제작한 동시계수기에 의해 간섭신호를 측정했다. 지난 연구와 이번 연구의 가장 큰 차이점은 광자를 집광하는데 단일모드 광섬유를 사용했다는 점이다. 단일모드 광섬유는 중심부 크기가 매우 작기 때문에 광결정에서 발생하는 여러 서로 다른 모드 광자 사이의 우연한 동시계수를 억제시키는 공간 필터역할을 함으로써 가시도가 개선된 것으로 보인다.

Measurement of TOF of fast neutrons with 238U target

  • Li, Meng;Guan, Yuanfan;Lu, Chengui;Zhang, Junwei;Yuan, Xiaohua;Duan, Limin;Yang, Herun;Hu, Rongjiang;He, Zhiyong;Wei, Xianglun;Ma, Peng;Gan, Zaiguo;Yang, Chunli;Zhang, Hongbin;Chen, Liang;Qiu, Tianli;Hou, Yikai
    • Nuclear Engineering and Technology
    • /
    • 제53권6호
    • /
    • pp.1964-1969
    • /
    • 2021
  • We developed a Dual-PPACs detector for fast neutron measurements that consists of two sets of PPAC: conventional PPAC and fission PPAC. A238U(U3O8) coating is placed in the fission PPAC's anode, which is used as the neutrons conversion layer. An experiment was performed to measure neutron time-of-flight (TOF) in which 252Cf spontaneous fission source was used. An excellent time resolution of 164ps has been observed at 6 mbar in isobutene gas. With the excellent time resolution of Dual-PPACs detector, exact neutron energy can be extracted from the timing measurement. The experimental detection efficiency was 1.9 × 10-7, consistent with the efficiency of 2.5 × 10-7 given by a Geant4 simulation. Ultimately, the results show that the Dual-PPACs detector is a suitable candidate for measuring fast neutrons in the future CiADS system.

High energy swift heavy ion irradiation and annealing effects on DC electrical characteristics of 200 GHz SiGe HBTs

  • Hegde, Vinayakprasanna N.;Praveen, K.C.;Pradeep, T.M.;Pushpa, N.;Cressler, John D.;Tripathi, Ambuj;Asokan, K.;Prakash, A.P. Gnana
    • Nuclear Engineering and Technology
    • /
    • 제51권5호
    • /
    • pp.1428-1435
    • /
    • 2019
  • The total ionizing dose (TID) and non ionizing energy loss (NIEL) effects of 100 MeV phosphorous ($P^{7+}$) and 80 MeV nitrogen ($N^{6+}$) ions on 200 GHz silicon-germanium heterojunction bipolar transistors (SiGe HBTs) were examined in the total dose range from 1 to 100 Mrad(Si). The in-situ I-V characteristics like Gummel characteristics, excess base current (${\Delta}I_B$), net oxide trapped charge ($N_{OX}$), current gain ($h_{FE}$), avalanche multiplication (M-1), neutral base recombination (NBR) and output characteristics ($I_C-V_{CE}$) were analysed before and after irradiation. The significant degradation in device parameters was observed after $100MeV\;P^{7+}$ and $80MeV\;N^{6+}$ ion irradiation. The $100MeV\;P^{7+}$ ions create more damage in the SiGe HBT structure and in turn degrade the electrical characteristics of SiGe HBTs more when compared to $80MeV\;N^{6+}$. The SiGe HBTs irradiated up to 100 Mrad of total dose were annealed from $50^{\circ}C$ to $400^{\circ}C$ in different steps for 30 min duration in order to study the recovery of electrical characteristics. The recovery factors (RFs) are employed to analyse the contribution of room temperature and isochronal annealing in total recovery.