• 제목/요약/키워드: auxiliary resonant circuit

검색결과 135건 처리시간 0.019초

대각선 방향으로 분할된 압전 진동 에너지 수확 장치의 성능 연구 (Performance Study of Diagonally Segmented Piezoelectric Vibration Energy Harvester)

  • 김재은
    • 대한기계학회논문집A
    • /
    • 제37권8호
    • /
    • pp.983-989
    • /
    • 2013
  • 본 연구에서 제안한 압전 진동 에너지 수확 장치는 기존 외팔보의 직사각형 면이 대각선을 따라 분할되어 2 개의 에너지 수확 단위로 구성되어 있다. 부 구조물은 주 구조물이 진동 에너지 원에 부착되는 방향과 반대 방향으로 주 구조물의 끝단에 부착되어 있으며, 각 에너지 수확 단위는 폐회로 상태의 고유 진동수가 일치하도록 설계되었다. 동일한 고유 진동수를 갖는 2 개의 구조물이 연결될 때 관찰되는 일반적인 현상과 달리, 제안된 구조에서는 고유 진동수 분리가 작으며, 1 차 및 2 차 모드의 순서가 바뀌어 나타난다. 이로 인해 출력 전력 역시 특정 주파수 근처에서 집중 생성된다. 상용 유한 요소 해석 소프트웨어를 사용하여 제안된 진동 에너지 수확 장치의 최대 생성 전력이 동일한 설치 영역 및 끝단 질량을 갖는 기존 외팔보 형태의 장치에 비해 실질적으로 향상됨을 보였다.

모드 순서 전환된 2자유도계 압전 진동 에너지 수확 장치의 수학적 모델 (Mathematical Model for a Mode-sequence Reversed Two-degrees-of-freedom Piezoelectric Vibration Energy Harvester)

  • 이소원;김윤영;김재은
    • 한국소음진동공학회논문집
    • /
    • 제23권6호
    • /
    • pp.546-552
    • /
    • 2013
  • A cantilevered piezoelectric energy harvester(PEH) and an auxiliary mass-spring unit can be integrated into a novel two-degrees-of-freedom PEH where its lowest eigenmode is not an in-phase modes but an out-of-phase mode. This typical behavior was shown to enhance output power considerably compared with its stand-alone counterpart. The objective of this study is to newly develop a continuum-based mathematical model suitable for efficient analysis of the mode-sequence reversed PEH. Once such a mathematical model is available, various physical behaviors can be analytically investigated for better designs. After a new mathematical model is developed, its validity is checked by using ANSYS results, in terms of resonant frequency, open-circuit voltage, and output power with a specified external resistance.

Feasibility Study of Tapped Inductor Filter Assisted Soft-Switching PWM DC-DC Power Converter

  • Moisseev S.;Sato S;Hamada S;Wakaoka M
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
    • /
    • pp.231-234
    • /
    • 2003
  • This paper presents a novel high frequency transformer linked full-bridge type soft-switching phase-shift PWM control scheme DC-DC power converter, which can be used as power conditioner fur small-scale fuel cell power generation system. Using full-bridge soft-switching DC-DC converter topology makes possible to use low voltage high performance MOSFETs to achieve high efficiency of the power conditioner. A tapped inductor filter is implemented in the proposed soft-switching converter topology to achieve soft-switching PWM constant high frequency operation for a wide load variation range. to minimize circulating and idling currents without using additional resonant circuit and auxiliary power switching devices. The practical effectiveness of the proposed soft-switching DC-DC converter is verified in laboratory level experiment with 1 kW 100kHz breadboard setup using power MOSFETs. Actual efficiency of 94-96$\%$ is obtained for the wide load range

  • PDF

Zero-Voltage and Zero-Current Switching Interleaved Two-Switch Forward Converter

  • Chu, Enhui;Bao, Jianqun;Song, Qi;Zhang, Yang;Xie, Haolin;Chen, Zhifang;Zhou, Yue
    • Journal of Power Electronics
    • /
    • 제19권6호
    • /
    • pp.1413-1428
    • /
    • 2019
  • In this paper, a novel zero-voltage and zero-current switching (ZVZCS) interleaved two switch forward converter is proposed. By using a coupled-inductor-type smoothing filter, a snubber capacitor, the parallel capacitance of the leading switches and the transformer parasitic inductance, the proposed converter can realize soft-switching for the main power switches. This converter can effectively reduce the primary circulating current loss by using the coupled inductor and the snubber capacitor. Furthermore, this converter can reduce the reverse recovery loss, parasitic ringing and transient voltage stress in the secondary rectifier diodes caused by the leakage inductors of the transformer and the coupled inductance. The operation principle and steady state characteristics of the converter are analyzed according to the equivalent circuits in different operation modes. The practical effectiveness of the proposed converter was is illustrated by simulation and experimental results via a 500W, 100 kHz prototype using the power MOSFET.

투 스위치 인터리브 액티브 클램프 포워드 컨버터에 관한 연구 (A Study on the Two-switch Interleaved Active Clamp Forward Converter)

  • 정재엽;배진용;권순도;이동현;김용
    • 조명전기설비학회논문지
    • /
    • 제24권5호
    • /
    • pp.136-144
    • /
    • 2010
  • 본 논문에서는 2개의 액티브 클램프 포워드 컨버터로 구성된 투 스위치 인터리브 액티브 클램프 포워드 컨버터를 제안하고자 한다. 제안된 컨버터는 단지 2개의 스위치만을 필요로 하며, 각 스위치는 상호 보조스위치로서 동작하기 때문에 회로의 구성이 간단하고 저비용의 용이한 제어를 특징으로 한다. 아울러 부가적인 공진 인덕터로 인하여 데드타임 동안에 영전압 스위칭 동작이 가능하다. 제안된 컨버터는 인터리브 동작으로 인하여 출력 전압 및 전류 리플이 저감되므로 출력 필터의 크기를 줄일 수 있으며, 그로인하여 컨버터의 부피를 감소시킬 수 있다. 본 논문에서는 제안된 투 스위치 인터리브 액티브 클램프 포워드 컨버터의 모드별 해석과 특성을 논의하였으며, 160[W]급 시작품을 제작하여 그 타당성을 검증하였다.