• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.8
• /
• pp.706-711
• /
• 2015

The fighter aircraft uses several different loading configurations for air-to-surface and air-to-air combat missions. To maintain wings-level flight with an asymmetric weapon configuration, a pilot controls a roll trim system. However, it is difficult to apply an accurate roll trim input for wings-level flight in the actual flight under disturbance. The inaccurate roll trim input degrades the performance of the roll autopilot system. In this paper, to solve this problem, an integrator was additionally designed in the command part of the roll autopilot system. The initial transient response was improved by scheduling the limiter to restrict the roll attitude error. As a result of the evaluation of the simulation for the designed flight control law, the roll attitude following performance was found to be improved in the autopilot system operation under the inaccurate roll trim condition.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.6
• /
• pp.492-501
• /
• 2016

Three-Loop autopilot is generally used for the acceleration control of guided missiles. Because the acceleration command to the three-loop autopilot is given as values at the center of gravity, feedback information of IMU should be obtained at the same position. However, the position of IMU might not be located at the center of gravity due to the sub-system assignment. This paper presents the stability analysis of three-loop autopilot with respect to the arbitrary position of IMU and variation rate of center of gravity. Gain and phase margins are calculated for several trim points for general anti-tank missiles.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.3
• /
• pp.33-43
• /
• 2000

The guarantee of the fast dynamics stability is essential for successful application of singular Perturbation technique to control systems design. Even though the fast dynamics of the control systems is rendered stable by an analog controller, the fast dynamics stability of the control systems resulted from an digital implementation of the analog controller can be impaired severely. In this paper, we first investigate the time sampling effects on singular perturbation based control systems by centering on a design example of recently developed singular perturbation based STT missile autopilot with high performance. The investigation shows that the stability margin the fast dynamics of the STT misile autopilot system decreases rapidly as the sampling interval of discretizing the analog autopilot increases. Under this analysis, we propose a composite digital controller with compensation for the decreasing stability margin of the fast dynamics due to time sampling to achieve better performance with respect to sampling time. The improved performance of the proposed composite digital controller is verified by simulation. This result shows that one needs to investigate time sampling effects in the digital implementation of singular perturbation based controllder, and then can have benefit from the investigation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.2
• /
• pp.139-144
• /
• 2004

The flight control system designed for an unmanned airship, which is under development by KARI, is in reduced. First, the dynamic characteristics of the airship are addressed, which are fairly different from those of the nominal aircraft. In order to implement autonomous flight for the unmanned airship, flight control logic is designed including autopilot and guidance law. The autopilot is designed under consideration of the velocity region of the unmanned airship. The guidance laws are implemented in main operational modes such as point navigation, station keeping and spiral up/down for emergency return. Their simulation results are also presented in order to validate performances of the flight control system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.7
• /
• pp.658-668
• /
• 2004

This paper is concerned with a control allocation strategy using the dynamic inversion and the pseudo inverse control which generates the nominal control input trajectories. In addition, an autopilot design method is proposed by using time-varying control technique which is time-varying version of the pole placement of linear time-invariant system for an agile missile with aerodynamic fin and thrust vectoring control. The control allocation proposed in this paper is capable of extracting the maximum performance by combining each control effector, aerodynamic fin and thrust vectoring control. The adopted time-varying control technique for the autopilot design enhances the robustness of the tracking performance for a reference command. The main results are validated through the nonlinear simulations with aerodynamic data.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.699-703
• /
• 2004

The autopilot system targets decreasing labor, working environment, service safety security and elevation of service efficiency. Ultimate purpose is minimizing number of crew for guarantee economical efficiency of shipping service. Recently, being achieving research about Course Keeping Control, Track Keeping Control, Roll-Rudder Stabilization, Dynamic ship Positioning and Automatic Mooring Control etc. which compensate nonlinear characteristic using optimizing control technique. And application research is progressing using real ship on actual field. Relation of Rudder angle which adjusted by Steering Machine and ship-heading angle are non-linear. And, Load Condition of ship acts as non-linear element that influence to Parameter of ship. Also, because the speed of a current and direction of waves, velocity and quantity of wind etc. that id disturbance act in non-linear form, become factor who make service of shipping painfully. Therefore, service system of shipping requires robust control algorithm that can overcome nonlinearity. In this paper, Using GA algorithm,design autopilot system of ship that could overcome the non-linear factor of ship and disturbance and examined result through simulation.

• Journal of the Korean Institute of Navigation
• /
• v.19 no.3
• /
• pp.11-19
• /
• 1995

When an automatic course keeping is introduced, as is quite popular in modern navigation, the closed-loop control system consists of autopilot device, power unit, steering gear, ship dynamics, and magnetic or gyrocompass. We derive mathematical models of each element of the automatic steering system. We provide a method of theoretical analysis on the propulsive energy loss related to automatic steering of ships in the open seas, taking account of the on-off(non-linear) characteristics of power unit. Also we paid attention to non-linear element installed in autopilot device, which is normally called weather adjuster. Next we make numerical calculation of the effects of autopilot control constants on the propulsive energy loss for two kinds of ship, a fishing boat and an ore carrier. Realistic sea and wind disturbances are employed in the calculation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1995.04a
• /
• pp.65-92
• /
• 1995

The final aim of our research project is a study on assessment of automatic steering system of ships in open seas. In order to achieve this aim we need to know the characteristics of each component of the system and also to know the characteristics of disturbance to ship dynamcis. In this paper we provide calculation method of irregular disturbance to ships in autopilot navigation in open seas and also show calculation examples about two kinds of ship ore carrier and fishing boat. The disturbance consists of irregular wave and random wind, The disturbance is calculated as equivalent yaw angular velocity. Each spectrum and time history of disturbance are reasonably evaluated. Further investigation concerning to performance index of autopilot system and energy loss related to automatic course keeping will be dealt with in another paper,

• Journal of Fisheries and Marine Sciences Education
• /
• v.19 no.3
• /
• pp.510-516
• /
• 2007

The efficiency of magnetic compass direction sensor and magnetic compass by the laboratory experiment for the apparatus of generating artificial magnetic force and the onboard experiment on the fishing boat of coastal pot at the outside of Pusan Namhang were investigated. The results showed that the bearing angle of magnetic compass direction sensor was coincided with that of magnetic compass. However, the performance of magnetic compasses was unsuitable under the ISO rule by the characteristic experiment of damping curve. Therefore, the use of autopilot system using magnetic compass direction sensor which is based on the magnetic compass needs the sufficient notice.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1496-1499
• /
• 1996

A nonlinear tracking control technique developed for the control of nonlinear systems has been applied to the autopilot design of missile system. The difficulties in the application of inversion based control methods such as input-output feedback linearization and sliding mode control due to nonminimum phase characteristics are discussed. To avoid the stability problem associated with unstable zero dynamics, the input-output feedback linearization is applied with output-redefinition method to normal acceleration control. The output-redefinition method gives an indirect way to apply the nonlinear controls to nonminimum phase plants by redefining the plant output such that the tracking control of the modified output ensures the asymptotic tracking of the original output. The numerical simulation shows satisfactory results both for nominal and for slightly perturbed missile systems adopting the sliding mode control technique. However, the robustness problem in this method is briefly investigated and verified with the simulation.