• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.99-105
• /
• 2004

The car seat head restraint is used for neck injury(whiplash injury) prevention in rear end impacts. The purpose of this study was to evaluate the seat head restraints for the total number of 34 domestic cars. H-POINT machine and HRMD(head restraint measuring device) were applied to measure backset(the distance between head and seat head restraint) and height(height gap between head and seat head restraint). For tendency study of driver's head position, we took the 320 driver's pictures in the street. As results, There were only five percent drivers in good and acceptable zone. For car seat head restraint system, the results was 9 cars for good zone, 10 cars for acceptable zone, 9 cars for marginal zone and 6 cars for poor zone were evaluated. For a precise evaluation the of whiplash injury, detailed FE neck model will be developed and the clinical database should be constructed for model validation.

• 오토저널
• /
• 제31권4호
• /
• pp.26-33
• /
• 2009

• 한국산학기술학회논문지
• /
• 제12권3호
• /
• pp.1091-1097
• /
• 2011

본 논문은 자동차용 시트의 내부에 설치되어 탑승자의 등 부위를 지지하여 편안한 승차감을 제공하는 자동차용 시트의 플라스틱 서스펜션 어셈블리 개발에 관한 것이다. 운전자의 허리를 균등하게 지지하여 주는 구조를 갖도록 설계하고 시트 백 프레임과 플라스틱 서스펜션이 원활하게 조합될 수 있는 구조로 개발하고자 한다. 체압 분포 특성을 고려하여 서스펜션의 단품을 설계하고 기능성을 평가하였다. 또한 실제와 동일한 사이즈의 서스펜션을 모델링하고 구조해석을 수행하였다. 기존 스프링 서스펜션과 새로 개발된 플라스틱 서스펜션의 해석결과 및 실제 측정값이 유사함을 확인하고 최적의 해석 및 설계를 확립하였다.

• 한국자동차공학회논문집
• /
• 제17권4호
• /
• pp.1-9
• /
• 2009

A simplified model of seat-human body is presented to analyze vibrations of human body on a seat of vehicle. The theoretical model having seven degrees-of-freedom is composed of the inter-connected masses, springs and dampers. Until now, evaluation of ride comfort has been usually performed only through vehicle tests. This study aims to complement shortcomings of conventional vehicle tests in evaluation of ride comfort by using the theoretical model. The acceleration values of the human body are obtained from frequency response functions of the theoretical model. Thereafter, Ride and SEAT indexes are acquired by considering response characteristics of the human body for the 12 axes that are presented in BS 6841. A vehicle test is carried out to measure the acceleration values for the three parts of the human body such as upper body, hip and foot. Ride and SEAT indexes of the vehicle test are also obtained by considering the response characteristics of the human body, of which results are compared with the values from the theoretical model. It is found that the theoretical results are in good agreement with the experimental results.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.182-194
• /
• 1999

Occupant injury in rear end impact is rapidly becoming one of the most aggravating traffic safety problems with high human suffering and societal costs. Although rear end impact occurs at relatively low speed , it may cause permanent disability due to neck injuries resulting from an abrupt moment, shear force , and tension/compression force at the occipital condyles. The analysis is performed for a combined occupant-eat model response, using the SAFE(Safety Analysis for occupant crash Environment) computer program. The computational results are verified by those from sled tests. A parameter study is conducted for many physical and mechanical properties. Seat design has been performed based on the design of experiment process with respect to five parameters; seat-back upholstery stiffness, torsional stiffness of the seat-back. An orthogonal array is selected from the parameter study. A good design has been found from the analysis results based on the orthogonal array. The results show that reductions of stiffness in seat-back upholstery and joint are the most effective for preventing neck injuries.

• 한국자동차공학회논문집
• /
• 제20권3호
• /
• pp.58-66
• /
• 2012

This paper describes a design and a verification of linear state observers for a motorized seat belt system to estimate state information such as angular velocity and load torque. The motorized seat belt system provides functions to protect passengers and improve passenger's convenience. To realize these functions, sensors which can measure an angular velocity and load torque are needed. By use of the linear state observer, state information can be estimated without sensors. The motorized seat belt system is analysed and represented as a state space model which contains load torque as an augmented state. By the developed state space model, a full and reduced order observer are designed and verified by experiments. The full and reduced order observer are also compared from points of view of execution time and noise robustness.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.14-20
• /
• 2003

The minimization of valve and seat insert wear is a critical factor in the pursuit of engine performance improvement. In order to achieve this goal, we have developed a new simulator, which can generate and control high temperatures up to $900^{\circ}C$ and various speeds up to 80Hz during motion, just like an actual engine. The wear simulator is considered to be a valid simulation of the engine valve and seat insert wear process with various speeds during engine activity. The objective of this work focuses on the different degrees of wear from two different test speeds (10Hz & 25Hz). For this study, the temperature of the outer surface of the seat insert was controlled at $350^{\circ}C$, the cycle number was 2.1$\times$106, and the test load was 1960N. The wear depth and surface roughness were measured before and after the testing using a confocal laser scanner. It was found that a higher speed (25Hz) causes more wear than a lower speed (10Hz) under identical test conditions (temperature, cycle number and test load). In the wear mechanism adhesive wear, shear strain and abrasive wear could be observed.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.145-154
• /
• 2003

Occupant simulation models have been used to study trends or specific design changes in several typical crash situations. The ATB, Articulated Total Body, was developed and used to predict gross human body responses to vehicle crashes and pilot ejections. Since the ATB source code is open to public, the user can add their own defined modules and functions. The introduction of seat belts into cars significantly decreased the injury risk of passengers in frontal impacts. In this paper, a new seat belt model was developed and implemented into the ATB. For this purpose, a subroutine of the new seat belt was constructed. A force-deflection function was added to replace an existing function to consider energy absorption. The function includes hysteresis effects of the experiment data of the loading and unloading parts of the seat belt load-extension curve. Moreover, this belt model considers a slip between ellipsoid and belt segments. This paper attempted to validate the ATB program which includes the subroutine of new belt models comparing with the real car frontal crash experiments and MADYMO frontal models. The analysis focusses on the human movement and body accelerations.

• 한국자동차공학회논문집
• /
• 제12권3호
• /
• pp.159-169
• /
• 2004

In this study, integration control of air-cell seat and semi-active suspension is proposed to minimize the road-tyre force which can cause uncomfortable feeling to rider. The proposed integration control with sliding perturbation observer is consisted of air-cell seat control which uses the force generated by air-cell and the sky-hook control. The air-cell seat itself has been modeled as a 1 degree of freedom spring-damper system. The actual characteristics of the air-cell have been analyzed through experiments. In this paper, we introduces a new robust motion control algorithm using partial state feedback for a nonlinear system with modelling uncertainties and external disturbances. The major contribution of this work is the development and design of robust observer for the state and the perturbation. The combination skyhook controller and air-cell controller using the observer improves control performance, because of the robust routine called Sliding Observer Design for Integration Control of Air-Cell Seat and Semi-active Suspension. The simulation results show a high accuracy and a good performance.

• 한국자동차공학회논문집
• /
• 제20권4호
• /
• pp.10-15
• /
• 2012

The design of automobile occupant seat belt system has been studied by using MADYMO. Based on the FMVSS 208 (Federal Motor Vehicle Safety Standards 208) and the USNCAP (United States New Car Assessment Program) regulations, seat belt design parameters were chosen for the design improvement to the 5th percentile female dummy: limit force of load limiter, time to fire of shoulder belt, inlet length of shoulder belt, inlet length of lap belt. The design of experiment method was employed to optimize the design parameters of passenger seat belt. Range of injury probability due to the change of H-point position was estimated by the simulation.