• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.1
• /
• pp.100-107
• /
• 2018

Objectives: This study examines exposure to hazardous substances in the working environment caused by exposure to toxic substances produced in the aluminum die casting process in the automobile manufacturing industry. Materials and Methods: The exposure concentration levels, detection rates and time-trend of 15 hazardous factors in the aluminum die casting process over 10 years(from 2006 to 2016) were used as a database. Results: The study found that hazardous factors in the aluminum die casting process were mostly metals. The rate for detected samples was 70.6%(405 samples), and that for not detected samples was 29.4%. The noise for an eight-hour work shift showed a 49.7% exceedance rate for TLV-TWA. Average noise exposure was 89.0 dB. The maximum exposure level was 105.1 dB. Conclusion: The high numbers of no-detection rates for hazardous substance exposure shows that there is no need to do a work environment measurement. Therefore, alternatives are necessary for improving the efficiency and reliability of the work environment measurement. Moreover, to prevent noise damage, reducing noise sources from automation, shielding, or sound absorbents are necessary.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.4_2
• /
• pp.627-635
• /
• 2020

In this study, the optimal support span determination of pipeline system was carried out in consideration of the effects of seismic loads. The theoretical support and structural analysis were used to determine the optimal support span of piping system according to pipe diameter using theoretical and structural deflection criteria. The reliability of the analysis results was secured by comparing the structural and theoretical results. In particular, the optimum support span of piping system was obtained by considering the effects of seismic load, and the optimal support span of pipe diameter and piping system tended to be proportional to each other. When considering the effects of earthquakes on different pipe diameters(300~2,500mm), the span length is reduced by up to 48% at the allowable stress criterion, and the pipe span length is reduced by up to 5.9% at the deflection criterion. It can be seen that the effect of the seismic load on the determination of the piping span length has a greater effect on the stress than the displacement.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.2
• /
• pp.55-62
• /
• 2019

China has become the second largest economy since 2010. China's economy is supported by the rapid growth of its automobile industry. The rapid growth of the automobile and tire industry will increase the natural rubber (NR) demand as its primary raw materials. Although as a significant producer, China cannot fulfill the consumption by its domestic production. Thus China relies heavily on import from Southeast Asia countries as the primary producers of natural rubber in the world. China and Southeast Asia are dependent on their economy in terms of the availability of natural rubber as raw materials. But the economic slowdown in China since 2008 is expected to affect the international trading between China and Southeast Asia countries. This research aims to analyze the determinants of NR export from Southeast Asia to China using panel data analysis. The results show NR price, exchange rate, and China's economic slowdown significantly affect NR export to China, while Southeast Asian NR production has no significant effect. China as the main importer of NR from Southeast Asia has a big role in growing NR export in Southeast Asia. If China's economy doesn't improve soon, it will affect the economy in Southeast Asia.

• Korea Trade Review
• /
• v.44 no.3
• /
• pp.253-269
• /
• 2019

This study examines the utilization effect of FTA on the sales and profit of the secondary auto-part suppliers in two aspects: 1) firm-level survey on the utilization of FTA and 2) statistical inference on the FTA effects on their sales and profit. We use the GLS statistical technique, panel and survey data of 130 secondary auto-part suppliers in the Daegu and Kyungpook area in 2007-2016. The evidence shows that the secondary auto-part suppliers struggle to prepare documents for the FTA certificates of origin due to their small firm size, although they utilize the FTA at the relatively high rate of 92 percent. Statistical evidence shows that an increase in the export of the first vender significantly affects the sale of the secondary auto-part vendors, but not their profit. The low profit and high managing cost of utilizing the FTA deteriorate the utilization effect of the FTA of the secondary auto-part vendors, which is a key factor in a global supply chain and for the competitiveness of the automobile industry. Government policies are required for the secondary auto-part suppliers to utilize the FTA more effectively and share the benefits of tariff reduction with first auto-part vendors under FTA transaction.

• Journal of Korea Multimedia Society
• /
• v.25 no.2
• /
• pp.166-175
• /
• 2022

Digital transformation is driving so many changes in daily life and industry. The automobile industry is in a similar situation. In some cases, element techniques in areas called metabuses are also being adopted, such as 3D animated digital cockpit, around view, and voice AI, etc. Through the growth of the mobile market, the norm of human-computer interaction (HCI) has been evolving from keyboard-mouse interaction to touch screen. The core area was the graphical user interface (GUI), and recently, the audio user interface (AUI) has partially replaced the GUI. Since it is easy to access and intuitive to the user, it is quickly becoming a common area of the in-vehicle experience (IVE), especially. The benefits of a AUI are freeing the driver's eyes and hands, using fewer screens, lower interaction costs, more emotional and personal, effective for people with low vision. Nevertheless, when and where to apply a GUI or AUI are actually different approaches because some information is easier to process as we see it. In other cases, there is potential that AUI is more suitable. This is a study on a proposal to actively apply a AUI in the near future based on the context of various scenes occurring to improve IVE.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.615-621
• /
• 2023

In this study, flow analysis of single, double, and triple filter systems of cylindrical structures was performed to analyze the flow characteristics of each filter. As a result of the flow analysis of the filter system, the number of filters and the pressure drop rate tend to be proportional to each other. It was found that the area passing through the inside of the filter had almost the same pressure. The maximum pressure drop rate of the triple filter system was about 14.9% for the forward-flow and about 12.4% for the reverse-flow. It was determined that the performance of the filter was stable within 20% of the allowable pressure drop rate of the filter system, which is the standard presented to the Korea Water Technology Certification Institute(KWTCI). In the future, a study on the decompression characteristics of the filter system according to the effect of the arrangement interval and filter density of the triple filter will be conducted.

• Design & Manufacturing
• /
• v.17 no.3
• /
• pp.21-27
• /
• 2023

The mold industry in Japan, an advanced country in the mold industry, is also at a point of great change. The main causes are the Ukraine crisis and the collapse of the global supply chain (parts supply chain) caused by COVID-19. In addition, the prices of overseas products are rising sharply due to rapid exchange rate fluctuations (decrease in the value of the yen). Until now, Japan's monotsukuri industry has been actively pursuing overseas expansion, riding the trend of globalization. However, the trend began to rapidly reverse, and now the monotsukuri industry that had expanded overseas is showing a tendency to return to Japan. Another factor of change is the change in the automobile industry, which is the most demanded product in the mold industry. As the automobile industry evolves from gasoline cars to electric cars, the number of parts that make up a car will drastically decrease. This trend is expected to increase the demand for small-scale production of a variety of products in the mold industry, and furthermore, it is expected that short delivery times will be required in parts development. As in Korea, the production population working in the mold industry is rapidly decreasing in Japan as well. Even if you add up the total population working in manufacturing in Japan, it only accounts for about 15%. Even in Japan, it is judged that it will be difficult to sustain the monotsukuri industry with this small production population. Therefore, since improvement in production efficiency cannot be expected with the same manual dexterity as before, the mold industry is also demanding the development of mold technology at a different level than before to increase productivity. In this paper, I would like to introduce new Japanese mold technology collected through attending the Intermold exhibition. This is an example of applying a dedicated pin (Gastos) to a mold to prevent an increase in internal pressure during plastic injection molding, and a deep drawing press molding technology with an inherent hydraulic function.

• International Commerce and Information Review
• /
• v.11 no.3
• /
• pp.145-165
• /
• 2009

Nowadays, economic growth of China has become an important issue. Due to the demographic position and the market size, China-Korea trade relationship has grown tremendously and significantly. The Chinese relationship with the Korean industry has considerably increased over the years. Various trade competitiveness indices such as TSI, MRCAI, and IITI have been applied to measure the competitive advantage and the complementary of market structure between these two countries. For this purpose, the dataset from the year 2000 to 2008 provided by KITA were used. The MRCAI result show that Korea has specialized in the product of semiconductor, communication equipment, precision machine, automobile, and nonferrous metal. The intra-industry trade level of Korean manufacturing industry is rising in line with the dominance of vertical intra-industry trade(VIIT) trend.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.4
• /
• pp.1-5
• /
• 2012

By using LED optical devices and improving the efficiency of optical devices as well as lighting apparatus for humans, LED lighting industry puts the purpose of manufacturing the main products related with information, electric, large-sized LCD BLU, automobile, shipbuilding, agriculture, medical treatment, environment, and telecommunications, etc. Moreover, the main products and the industrial lighting products are manufactured with fusion, as the result, LED lighting industry provides various effects as well as sources of technology based on practical use of LED technology in order to develop the industry from the perspective of the lower price, the higher efficiency, the higher function, the deeper reliance. In the future, not only the development of new LED technology but also the fusion and combination of digital IT technologies using wire-wireless communication, sensor, controller, and artificial intelligence will be expected to create new industrial fields.

• International Commerce and Information Review
• /
• v.16 no.4
• /
• pp.247-261
• /
• 2014

In this study, it investigates the highly controversial issue "low carbon car subsidy". Through the policy's intent, purpose, and necessity, it aims to present alternatives for automotive industry development. Introducing the low carbon car subsidy will bring a huge change to the vehicle purchase practices by changing vehicle purchase cost. It expects that this change will reduce greenhouse gas emission from vehicles. For successful settlement of the system, it shall set up the target sections for subsidy and levy appropriately in order to get the nation's consensus. Additionally, it has to conduct sufficient reviews the measures such as adjustment to the existing auto tax, divided payments of burden charge, etc before enforcing the system. In terms of the automobile industry, it must do their level best in technical development in order to meet the carbon dioxide emission level of imported cars until the enforcement. Also, the government has to strengthen its support to the industry.