• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.4 s.235
• /
• pp.469-476
• /
• 2005

Numerical modeling has been carried out to investigate the two-dimensional air flow in automobile interior with a forced exhaust close to main air inlet for typical ventilation modes. The characteristics such as streamlines and temperature fields in the passenger compartment room with the forced exhaust are analyzed with comparison of the cases without a forced exhaust. The simulation results show that air flow on the floor near the front seat is increased with the forced exhaust for all ventilation modes. Flow recirculation in the cabin is most active in mode 2 with a vertical suction inlet in comparison with other two modes. In particular, less time is taken for air temperature to reach the inlet temperature due to the forced exhaust for the ventilation modes. Finally, it could be predicted that ventilating air flow is much improved with the forced exhaust in the interior Modeling results in this study can be applied to the optimal design of automobile interior fur air ventilation system.

• Journal of Arbitration Studies
• /
• v.22 no.1
• /
• pp.89-110
• /
• 2012

No-fault automobile insurance system is a statutory scheme to provide automobile accident victims with compensation for certain expenses arising from personal injuries occurring in car accidents. New York State has enacted No-Fault Law to ensure that the injured in automobile accidents be paid rapidly by their own insurance company for medical expenses, lost earnings regardless of fault, replacing common law system of reparation for personal injuries under tort law. Its primary purpose is to facilitate compensation without the need to exhaust time-consuming litigation over establishing the existence of fault and the extent of damages. No-Fault Law allows arbitration as a method for settling the no-fault insurance disputes. No-fault arbitration, however, differs in a significant way from general arbitration system. First, No-Fault Law provides the parties with the option to submit any dispute involving no-fault automobile insurance to arbitration. Second, no-fault arbitration attempts to speed its procedure incorporating various methods. Third, the parties are required to seek review of arbitral awards by master arbitrator prior to seeking court's review. Fourth, the parties have right to bring de novo action in court if master arbitrator's award exceeds $5,000. Given the current state of law in Korea, it may not be easy to introduce no-fault arbitration system into Korea in the context of automobile insurance disputes settlement as its law has a long-established reparation system based on tort liability and no-fault arbitration system has its own features that differ from general arbitration system. Nonetheless, it could be suggested that no-fault arbitration be introduced in other fields which require speedy dispute resolution and a third party's decision to settle the disputes. The optional right of submitting disputes to arbitration as provided by No-Fault Law of New York State may offer a ground to supprot the effectiveness of an optional arbitration agreement.

• Journal of Welding and Joining
• /
• v.30 no.4
• /
• pp.31-37
• /
• 2012

In recent years, a demand for precision-welding is increasing in wide industrial fields for getting a high quality welded structures. Although laser welding is commonly used for precision-welding, gas tungsten arc (GTA) welding is also attempted as a precision-welding due to the cost benefit. However, welding heat causes an uneven temperature distribution leading to welding deformation. Since it causes geometric errors and degrades product quality, welding distortion recently rises as an important issue in the field of automobile parts. To control welding deformation, it is needed to design in shapes that can maximize stiffness against deformation during welding; control the welding sequence; minimize heat input; and weld allowing reverse deformation; etc. Thus it is necessary to find the one, among such approaches, that can minimize the deformation range by mathematical analysis and understand how effective it would be when it is actually used in industrial fields. This study performs analyses by numerical calculations and experiments for the De-Tent Lever, one of transmission part that requires precision the most among automobile parts, as the subject of experiment. Decrease in welding deformation is required for this part, since there is currently a trouble in guaranteeing precision due to angular deformation by welding between boss and plate. Finally the ways to minimize welding deformation has been suggested in this study through analyses on it.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.1
• /
• pp.100-106
• /
• 2017

Sound quality engineering in automobile noise applications has become more and more important under the current quiet driving condition because various noise components masked under high noise level can be audible in quieter driving situation. Many researches have been carried out for subjective and objective assessments on automobile sounds and noises. In particular, the interior sound quality has been one of research fields that can give high-quality feature to automobile products. Although many works related to the interior sound quality have been progressed or completed in foreign countries, limited research results are presented in the country. In the study, subjective assessments are first performed with 20 subjects to select perceptual adjectives suitable to the assessment of car interior noises during acceleration. The selected perceptual adjectives are employed as the assessment scales to evaluate the acceleration noises in questionnaire procedures using 35 subjects, for which several noises are created through digital filtering of the acceleration noises measured. Mean values and standard deviations for subjective assessment scores obtained by the questionnaire procedures are calculated and their reliability are also verified. Finally, various statistical analyses such as the correlation analysis and the factor analysis are carried out to reveal the interrelationship between the assessment scales and the spectrum components of the acceleration noises.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.760-768
• /
• 2016

Three-phase grid-connected inverters are widely applied in the fields of new energy power generation, electric vehicles and so on. Islanding detection is necessary to ensure the stability and safety of such systems. In this paper, feature recognition technology is applied and a novel islanding detection method is proposed. It can identify the features of inverter systems. The theoretical values of these features are defined as codebooks. The difference between the actual value of a feature and the codebook is defined as the quantizing distortion. When islanding happens, the sum of the quantizing distortions exceeds the threshold value. Thus, islanding can be detected. The non-detection zone can be avoided by choosing reasonable features. To accelerate the speed of detection and to avoid miscalculation, an active islanding detection method based on feature recognition technology is given. Compared to the active frequency or phase drift methods, the proposed active method can reduce the distortion of grid-current when the inverter works normally. The principles of the islanding detection method based on the feature recognition technology and the improved active method are both analyzed in detail. An 18 kVA DSP-based three-phase inverter with the SVPWM control strategy has been established and tested. Simulation and experimental results verify the theoretical analysis.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.187-191
• /
• 2001

Sound quality engineering in automobile noise applications has become more and more important under the current quiet driving condition that the interior noise level is below 65 dBA, because various noise components masked under high noise level can be audible in quieter driving situation. Many researches have been carried out for subjective and objective assessments on automobile sounds and noises. In particular, the interior sound quality has been one of research fields that can give high-quality feature to automobile products. Although many works related to the interior sound quality have been progressed or completed in foreign countries, limited research results are presented in the country. In the study, as a base step necessary to objective assessments on car interior noises, subjective assessments are performed with 20 subjects. For this purpose, perceptual adjectives suitable to the assessment of acceleration noises are selected as assessment scales through questionnaire procedures using 35 subjects. Mean values and standard deviations are calculated for noises created through digital filtering of acceleration noises measured. In addition, the correlation analysis and the factor analysis are carried out to investigate the dependence of the assessment scales selected.

• Korean Institute of Interior Design Journal
• /
• v.19 no.2
• /
• pp.24-32
• /
• 2010

The purpose of this study is to examine the work scope of architects who work for Alessi and their application of design elements in various fields of design. Urban Design, Architectural Design and interior design are interrelated. Thus the designers should have various design experiences for expanding their knowledge of their specialty. These experiences can help not only the university students who will be designers in the future get creative concept, but also architects and interior designers develop their abilities to look at design. As a result, their society competitiveness can be increased. For this reason, this study selects eleven architects who participated in Tea & Coffee set project of Alessi. This study researches how their design elements apply to various design areas and investigates architects's activities not only in their major fields, but also in other design fields. The result of this study is that architects participates in all design fields, except automobile design which is not related to architecture. Especially, among various design areas, architects are likely to participate in architectural design, interior design, and furniture design Contrary to this, they hardly participate in bathroom. Also, one design element applies to various design areas, such as construction, furniture, accessories, and so on.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.67-74
• /
• 2009

Injection molding have been used for manufacturing various fields of automotive interior trims for years. The demands on the injection molding technique are grown with the further development of the automobile technique and the design presentations for cost reduction and environment-friendly. This paper shows that multi-component injection conditions are different from general injection, also shows how to optimize part design and mold design and how to manufacturing through the efficient use of multi-component injection in development process using core back system. To fulfill this purpose, all influential process parameters related to the quality of automobile parts were analyzed in terms of the correlation between them. Base on that, a innovative process will be developed by injection engineers to implement it in practice.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.45-48
• /
• 1999

A program for initial blank design in sheet forming which contains the capabilities of forward loading simulation by the finite element method and backward tracking simulation has been developed and proved the effectiveness by applying to a square cup stamping process. In the blank design of square cup stamping the backward tracing program can produce an optimum blank configuration which forms a sound net-shape cup produce without machining after forming. Another general application appears in the blank design of a cup stamping with protruding flanges one of typical automobile components. The blank configurations derived by backward tracing simulation have been confirmed by a series of loading simulations. The approach for decision of an initial blank configuration presented in this study will be a milestone in fields of sheet forming process design.

• Archives of design research
• /
• v.13 no.4
• /
• pp.95-103
• /
• 2000

In order to satisfy customers' desire that is becoming more diverse, and to create the unique character of a product in the fast changing social structure and living environment, today's designers have to make efforts to provide new ideas continuously. In the twentieth century, the development of design in various aspects could be possible through an epoch-making progress of technology and industrialization, and thus the meaning and style of design has changed differently according to the current of the times. The retro design, which borrows the designs and styles which were popular in the past and recreates the design of modern meaning and concept, is widely applied now and in the spotlight as a latest design trend. This phenomenon of revival style appears as an image that makes us recollect the past in various fields while being recognized as an another value of new sense. Considered from the history of style changes for the past 100 years, the automobile design, the most representative in product design fields, has gradually changed in its types according to continuous historical, social, and cultural changes and technological progress, while a variety of designs have been continuously presented. The recent current of automobile styles, according to the rapid progress of advanced scientific technology, shows the fast and various changes and the retro style is becoming a new trend arousing people's interests and reintroducing the past designs. The revival trend in automobile designs is expected to stimulate human sensitivity and restore humanity on a different level before the trend, and also expected to be recreated as a new design trend in modern sense, connecting us with the past culture and expanding the realms of future designs.