• 원예과학기술지
• /
• 제31권4호
• /
• pp.400-406
• /
• 2013

This study was conducted to investigate the growth and flowering of African marigold (Tagetes erecta L.) and salvia (Salvia splendens F. Sello ex Ruem & Schult.) seedlings before and after storage under fluorescent lamps and green LED radiation conditions with different light intensities during storage. The both seedlings were kept under a storage room controlled at $8^{\circ}C$ air temperature and $40{\pm}10%$ relative humidity conditions. Light intensities were maintained at 15 and $30{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ during storage. In lighting treatments, dry weight of African marigold at 28 days after storage was not significantly different, and decreased approximately 29% compared to pre-storage under dark treatment. There was no significant difference in the leaf area of salvia seedlings stored under dark condition compared to before storage, but the leaf area under green light radiation with higher light intensity (treatment GH) was two times greater than before storage. The survival rate after transplanting of African marigold stored under dark condition was 10%, and days to flowering increased compared to those stored under fluorescent and green light with higher light intensity (treatment FLH, GH). Comparing to before storage, growth and flowering of the both seedlings after storage were significantly promoted by the light exposure during storage. The present experimental results show that the light intensity should be decided to maintain minimum growth during lighting storage and storage quality of the seedlings such as flowering promotion and extended blooming period after lighting treatment during storage period from the above results.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1211-1222
• /
• 2018

This study presents a power distribution control scheme for a three-phase interleaved parallel DC/DC converter in a battery energy storage system. To extend battery life and increase the power equalization rate, a control method based on the nth order of the state of charge (SoC) is proposed for the charging and discharging processes. In the discharging process, the battery sets with high SoC deliver more power, whereas those with low SoC deliver less power. Therefore, the SoC between each battery set gradually decreases. However, in the two-stage charging process, the battery sets with high SoC absorb less power, and thus, a power correction algorithm is proposed to prevent the power of each particular battery set from exceeding its rated power. In the simulation performed with MATLAB/Simulink, results show that the proposed scheme can rapidly and effectively control the power distribution of the battery sets in the charging and discharging processes.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1469-1482
• /
• 2016

In hybrid energy storage systems, supercapacitors are usually connected in series to meet the required voltage levels. Equalizers are effective in prolonging the life of hybrid energy storage systems because they eliminate the voltage imbalance on cells. This study proposes a modularized equalizer, which is based on a combination of a half-bridge inverter, an inductor, and two auxiliary capacitors. The proposed equalizer inherits the advantages of inductor-based equalization systems, but it also offers unique merits, such as low switching losses and an easy-to-use control algorithm. The zero-voltage switching scheme is analyzed, and the power model is established. A fixed-frequency operation strategy is proposed to simplify the control and lower the cost. The switching patterns and conditions for zero-voltage switching are discussed. Simulation results based on PSIM are presented to verify the validity of the proposed equalizer. An equalization test for two supercapacitor cells is performed. An experimental hybrid energy storage system, which consists of batteries and supercapacitors, is established to verify the performance of the proposed equalizer. The analysis, simulation results, and experimental results are in good agreement, thus indicating that the circuit is practical.

• 대한임베디드공학회논문지
• /
• 제19권3호
• /
• pp.141-149
• /
• 2024

This paper proposes a configuration automation technique to minimize service interruption time in the event of a corporate network access layer switch failure. The automation is achieved without the need for a separate external system, as the network setting information is stored in a container inside the switch, enabling rapid recovery without requiring separate storage. This approach ensures the continuity of network services and demonstrates the efficiency of configuration automation. The proposed technique improves corporate network stability by providing a quick response in the event of a failure.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1998년도 하계 학술대회 논문집
• /
• pp.197-205
• /
• 1998

• International journal of advanced smart convergence
• /
• 제12권3호
• /
• pp.221-232
• /
• 2023

Recently, due to the expansion of the logistics industry, demand for logistics automation equipment is increasing. The modern logistics industry is a high-tech industry that combines various technologies. In general, as various technologies are grafted, the complexity of the system increases, and the occurrence rate of defects and failures also increases. As such, it is time for a predictive maintenance model specialized for logistics automation equipment. In this paper, in order to secure the operational reliability of the ICT/Cold-Chain Unmanned Storage, a predictive maintenance system was implemented based on the LSTM model. In this paper, a server for data management, such as collection and monitoring, and an analysis server that notifies the monitoring server through data-based failure and defect analysis are separately distinguished. The predictive maintenance platform presented in this paper works by collecting data and receiving data based on RabbitMQ, loading data in an InMemory method using Redis, and managing snapshot data DB in real time. The predictive maintenance platform can contribute to securing reliability by identifying potential failures and defects that may occur in the operation of the ICT/Cold-Chain Unmanned Storage in the future.

• 한국항공운항학회지
• /
• 제26권2호
• /
• pp.76-82
• /
• 2018

A test simulator is needed to develop a fuel quantity measurement system that takes into account the roll and pitch motion of the aircraft. In this paper, we develop a test simulator that consists of attitude simulation equipment, fueling equipment, and data storage equipment. The attitude simulation equipment simulates the aircraft attitude. It is manufactured to operate pitch angle and roll angle movement. The fueling equipment supplies fuel to the supplementary fuel tank. The data storage equipment collects and stores the measured data. We also develop an automation software that operates the test simulator and collects data automatically. The test simulator has been automated to prevent testers from being exposed to toxic fuel. Through automation software, the collection period is reduced by one quarter compared to manual collection. The developed fuel quantity measurement system is verified through the test simulator.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 추계학술대회
• /
• pp.281-286
• /
• 2004

컨테이너터미널에서 생산성을 향상시키기 위해서는 야드를 효율적으로 운영하는 것이 중요하다. 자동화 컨테이너터미널의 경 우 수직형 자동화 야드로서 기존의 수평형 장치장과는 다른 장치장 특성을 가지게 된다. 자동화 컨테이너터미널에서 자동화 야드는 자동 화 장비가 운영되므로 자동화 장비와 외부트럭, 본선작업 등과 연계된 효율적인 장치장 계획이 필요하다. 그러나 기존의 장치장 계획은 공간할당 문제이므로 자동화 컨테이너터미널에서 사용된다면 실시간으로 변화하는 장비 및 장치장 상황이 반영되지 않기 때문에 장치장의 효율성이 저하되고 하역시간의 증가를 초래하게 된다. 본 연구에서는 이러한 문제를 해결하기 위해 본선계획파 장치장 현황, ATC의 상황을 고려한 실시간 컨테이너의 장치 위치를 결정하는 알고리즘을 제안하고자 한다.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1100-1105
• /
• 2022

Denoising, registering, and detecting changes of 3D digital map are generally conducted by skilled technicians, which leads to inefficiency and the intervention of individual judgment. The manual post-processing for analyzing 3D point cloud data of construction sites requires a long time and sufficient resources. This study develops automation technology for analyzing 3D point cloud data for construction sites. Scanned data are automatically denoised, and the denoised data are stored in a specific storage. The stored data set is automatically registrated when the data set to be registrated is prepared. In addition, regions with non-homogeneous densities will be converted into homogeneous data. The change detection function is developed to automatically analyze the degree of terrain change occurred between time series data.

• 한국컴퓨터정보학회논문지
• /
• 제3권3호
• /
• pp.139-150
• /
• 1998

과학과 정보통신의 발달로 그리고 컴퓨터의 폭넓은 보급으로 지금까지 인력에 의해 이루어지던 제반 서류전달 및 서류결재가 컴퓨터에 의해 자동으로 처리하거나 수행할 수있도록 하는 공장자동화(Factory Automaton : FA), 그리고 사무자동화(Office Automation : OA)로 발전하였으며 이러한 기술을 무역업무에 적용시키는 무역의 사무자동화(Trade Automation : TA)에 무역업계와 무역관련기관이 관심을 가지고 있다. 본 논문은 한국의 무역자동화에 관한 현황을 고찰함으로서 EDI의 효용성과 가치, 필요성을 강조하고자 한다.