• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.90-93
• /
• 2003

Forging machinery traditionally gives an impression of heavy, greasy, noisy and approximate equipment. Recent demands from markets, especially automobile, have made machine designers to reconsider their concept. It is also noted that more advanced technologies in other industries, such as electronics and IT, have become accessible. Naturally these technologies were first applied in highly sophisticated fields for additional performance or features with extra expense. Drastic cost reduction in last decade changes this picture. They provide not only performance and functions but also a chance in reducing costs. Powerful servomotors, accurate sensors and fast processor satisfy performance, precision and machine control requirement. Control by wires replaces traditional mechanical linkage. Additional features such as factory automation will come almost free.

• International Journal of Control, Automation, and Systems
• /
• 제4권4호
• /
• pp.524-528
• /
• 2006

A controller built with the gyro effect for a balance-beam can freely control the attitude of an unstructured object by changing the position of an inner gimbal. In this paper, we propose a new balance-beam controller that can detect the inertia of the load to limit the velocity of the load commanded by a user. We found that when there was smaller load inertia, a larger restoration displacement occurred. Therefore, the load can be identified by issuing a predefined command to measure the restoration displacement, which enables us to construct a controller that can limit the angular velocity of the load by planning the motion. Experimental results show the performance of the controller with different loads.

• International Journal of Control, Automation, and Systems
• /
• 제3권spc2호
• /
• pp.363-375
• /
• 2005

The paper describes some of the challenges that face the control of nonlinear interconnected power systems. The challenges include the selection of appropriate control and information structures that could range from a completely decentralized to a fully centralized structure. Once a structure is proven to be feasible, the effectiveness of control signals needs to be assessed. Analytical tools are derived for this purpose in the first part of the paper, and they are illustrated with a case study that involves the design of a damping decentralized controller using a Thyristor Controlled Series Compensation device. The second part of the paper deals with the load following and tracking problem through automatic generation control for a system that has been re-structured or deregulated. This problem can be solved using a completely decentralized scheme. It is solved here using fuzzy rules and with an emphasis on compliance with NERC's standards and reduction of wear and tear of the equipment. It is illustrated with a test system that has three interconnected control areas. Finally, comments on the economics of control and the author's vision are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.653-657
• /
• 2005

AGV is very useful equipment to transfer containers in automated container terminal. AGV must have Obstacle Detection System (ODS) for port automation. ODS needs the function to classify some specified object from background in acquired data. And it must be able to track classified moving objects. Finally, ODS could determine its next action for safe driving whether it should do emergency stop or speed down, or it should change its deriving lane. For these functions, ODS can have many different kinds of algorithm. In this paper, we present one of AGV to be used in automated container terminal.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.431-439
• /
• 2007

Data logger is generally needed for gathering field information automatically(or manually), using various sensors. However it, currently used in the county, is produced and developed by overseas. It is difficult to upgrade related program due to developed system and limited user in terms of environment it is used. On the other hand, several companies developed and sold unique data logger based their technique expertise in the country. But enhancement and practical use of related technology has much difficulties because feasibility, marketability and demand for technique are uncertain. In this study, it is the main purpose to offer basic information to select equipment suitable for field characteristic through analysis and comparison with features about method of information collection, operating program and process technique data logger which is used primarily in geotechnical engineering in both domestic and international.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2489-2491
• /
• 2004

DC-Motor is needed more and more sophisticated control to follow the highest precision of industrial automation and used in a number of control equipment or industrial fields. It is also useful to control single crystal($A1_2O_3$) growth. It is possible to procure a quality crystal utilizing a DC-Motor, if you mix Hydrogen and Oxygen gas properly and keep proper temperature in accordance with time process. In this paper, we will study about electrical valve positioning system for the gas mixture to improve the quality of single crystal($A1_2O_3$) growth and we will design about realtime monitoring systems of the automatic gas control DC- Motor for single crystal($A1_2O_3$) growth.

• 대한기계학회논문집A
• /
• 제25권3호
• /
• pp.443-451
• /
• 2001

This paper addresses an on-line scheduling method for track systems in semiconductor fabrication. A track system is a clustered equipment performing photolithography process in semiconductor fabrication. Trends toward high automation and flexibility in the track systems accelerate the necessity of the intelligent controller that can guarantee reliability and optimize productivity of the track systems. This paper proposes an-efficient on-line scheduling method that can avoid deadlock inherent to track systems and optimize the productivity. We employ two procedures for the on-line scheduling. First, we define potential deadlock set to apply deadlock avoidance policy efficiently. After introducing the potential deadlock set, we propose a deadlock avoidance policy using an on-line Gantt chart, which can generate optimal near-optimal schedule without deadlock. The proposed on-line scheduling method is shown to be efficient in handling deadlock inherent to the track systems through simulation.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.73-78
• /
• 2003

Ultrasonic measurement is one of important technologies in the lift-time maintenance of nuclear poler plant. Ultrasonic inspection system is consisted of the operator, equipment and procedure. The reliability of ultrasonic inspection system is affected by its ability. The performance demonstration round robin was conducted to quantify the capability of ultrasonic inspection for in-service. The small number of teams who employed procedures that met or exceeded ASME Sec. XI Code requirements detected the piping of nuclear power plant with various cracks to evaluate the capability of detection and sizing. In this paper, the statistical reliability assessment of ultrasonic nondestructive inspection data using Monte Carlo simulation is presented. The results of the probability of detection (POD) analysis using Monte Carlo simulation are compared to these of logistic probability model. In these results, Monte Carlo simulation was found to be very useful to the reliability assessment f3r the small hit/miss data sets.

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.606-612
• /
• 2010

This study took advantage of NC processing technique in order to recreate design in development process of leisure boat based on the Korean boats and ships. CNC milling is an area which is concerned in automation process of boat production and needs sophisticated software, equipment and professionals to pilot it. The progress of manufacture begins when the surface model creation and simulation being done using CAD/CAM software. In this process, the needs such as 3D design, NC processing data, plug lamination and partition processing appear as detailed steps. The study completed these detailed steps and also the application example has been studied with presenting engineering potentialities.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.263-268
• /
• 2005

Recently, restrooms have become a crucial aspect of improving quality of life as a redefined living sector. That offer the functional convenience to user by expansion of toilet space and various subsidiary facilities through reconfiguration of space and automation of equipment naturally, is changing to independent culture space that it is that is comfortable with a rest that comfort and affection overflow using finish introduction and properties of high-quality site. However, existing restrooms in current railway vehicle have not fulfilled such desire and short failed in many aspects of such needs. Even in restrooms for High-Speed Rail System have many areas to improve. Thus, factors encountered by users of rail system have been visually, environmentally and functionally classified.