• Transactions of Materials Processing
• /
• v.12 no.5
• /
• pp.504-512
• /
• 2003

The plastic strain ratios(R-values) of low carbon steel sheets were determined by the automatic strain measurement method using two extensometers, the indirect photo method for the same tensile specimen during tensile test and the indirect method for the specimen after tensile test. The experimental results showed that the measured plastic strain ratios from the automatic strain measurement method using two extensometers coincided with those from the indirect photo method and the indirect method for all tensile specimens. In addition, the strain dependence of plastic strain ratios could be continuously recorded and the anisotropy of the strength coefficient, K, and strain hardening exponent, n, could be automatically calculated in three directions by computer through the use of two extensometers. The experimental results showed that the strain dependence of R-value was related to the anisotropy of strain hardening exponent in low carbon steel sheets.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.2
• /
• pp.85-94
• /
• 1990

In automatic metal cuttings, the chip control is one of the serious problems. So the automatic detection of chip forms is essential to the chip control in automatic metal cuttings. Cutting experiments were carried out under the variety of cutting conditions (cutting speed, feed, depth of cut and tool geometry) and with workpiece made of steel (S45C), and cutting forces were measured in-processing by using a piezoelectric type Tool Dynamometer. In this report, the frequency analysis of dynamic components, the upper frequency distributions, the ratio of RMS values, the numbers of null point and the probability density were calculated from the dynamic componeents of cutting forces filtered through various band pass filters. Experimental results showed that computer chip form monitoring system based on the cutting forces was designed and simulated and that 6 type of chip forms could be detected while in-process machining.

• Korean Journal of Metals and Materials
• /
• v.48 no.12
• /
• pp.1123-1129
• /
• 2010

In order to apply the Sievert's type automatic apparatus to thermal analysis of hydrogen absorbing materials, the dehydrogenation of the Mg-H system was investigated. As the initial wt% of hydrogen was increased to 4.4, the peak temperature of evolution rate shifted to higher temperature. However, with the initial wt% of hydrogen higher than 4.4, peak temperature of evolution rate did not change. The peak temperatures of evolution rate obtained by automatic apparatus were almost the same as those measured by a manual apparatus. As the heating rate was increased, the peak temperatures increased; the peak temperatures for heating rates 1, 2 and 3 K/min were 664, 687 and 702 K, respectively. The activation energy for the decomposition of Mg hydride was 101 kJ/mol. The Sievert's type automatic apparatus can be successively applied to the thermal analysis of metal hydride.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.4
• /
• pp.592-602
• /
• 1995

Non-grid and grid method are used for modeling the routing region of the automatic routing system. In this study, we develop the automatic routing system by mixing the methods of non-grid and grid to improve the speed of routing. Grid method has a demerit which decreases the automatic routing speed because it is required a lot of memory by the limitation of the size of board and grid, although the electrical and physical elements are insufficient on the PCB, But non-grid is spent gurite less memory than grid method by using a shape-based patterns. Therefore, we used the methods of non-grid and grid altogether in this paper, In the former method, it is attributed to the improvement of speed, the latter one is applied only the connection of the failed routing in the former one, and it performs the complete automatic routing. This system was developed with C＋＋language under the Windows NT environment of IBM 486DX2-66 Computer.

• The KIPS Transactions:PartB
• /
• v.19B no.1
• /
• pp.43-52
• /
• 2012

Semantic role labeling is the research area analyzing the semantic relationship between elements in a sentence and it is considered as one of the most important semantic analysis research areas in natural language processing, such as word sense disambiguation. However, due to the lack of the relative linguistic resources, Korean semantic role labeling research has not been sufficiently developed. We, in this paper, propose an automatic predicate-argument analyzer to begin constructing the Korean PropBank which has been widely utilized in the semantic role labeling. The analyzer has mainly two components: the semantic lexical dictionary and the automatic predicate-argument extractor. The dictionary has the case frame information of verbs and the extractor is a module to decide the semantic class of the argument for a specific predicate existing in the syntactically annotated corpus. The analyzer developed in this research will help the construction of Korean PropBank and will finally play a big role in Korean semantic role labeling.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.257-263
• /
• 2018

The purpose of this study is to develop an automatic inspection system for a part of the differential drive gear into the transmission. This technology will make using the microvision automatic test equipment and automatic test equipment microlaser. This is that the operator intends to make the defect rate 0 in the inspection stage of the product which has been carelessly processed. The equipment developed in this research project will be applied to many areas. Packaging companies, nut bolt processing company, precisely supplier for printing on top of the semiconductor, SMT, etc. The company wants to sell the vision inspection equipment for various applications. If the defective rate of 0 is achieved through this research project, it is also possible to secure a stable supply from the parent company, and to lay the foundations for exporting based on product reliability. When the automatic inspection system is applied to domestic automobile parts processing companies, the reliability of automobiles in Korea will be greatly increased.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.2
• /
• pp.32-38
• /
• 2017

This paper is about the analysis on the vibration characteristic of tooling units on the precision bed in high-speed automatic lathe for precision machining. An automatic lathe operating at about 25,000 RPM is a critical factor in the self-weight stress and deformation of the bed. Especially, the resonance frequency should be grasped in advance to prevent abnormal vibration that may occur during processing. If the wrong bed is used, the resonant frequency can have a fatal influence on the precision machining and increase the defective rate of precision machined parts such as semiconductor parts. In this paper, vibration characteristics were evaluated through static load and resonance frequency analysis of automatic lathe bed. As a result, the maximum stress was 0.14MPa, the maximum deformation amount was $17.9{\mu}m$, and the natural frequency was 364.72Hz. The resonance frequency was calculated as 718Hz, and the stability was confirmed by being in the range of 400Hz or more, which is the processing condition.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.1
• /
• pp.66-70
• /
• 2018

This paper is about the analysis on the vibration characteristic of tooling units on the precision bed in turning and hobbing automatic lathe for precision machining. An automatic lathe operating at about 12,000 RPM is a critical factor in the self-weight stress and deformation of the bed. Especially, the resonance frequency should be grasped in advance to prevent abnormal vibration that may occur during processing. If the wrong bed is used, the resonant frequency can have a fatal influence on the precision machining and increase the defective rate of precision machined parts such as semiconductor parts. In this paper, vibration characteristics were evaluated through static load and resonance frequency analysis of automatic lathe bed. As a result, the maximum stress was 14.52 MPa, the maximum deformation amount was $12.15{\mu}m$, and the natural frequency was 189.43 Hz. The resonance frequency was calculated as 500 Hz, and the stability was confirmed by being in the range of 200 Hz or more, which is the processing condition.

• The KIPS Transactions:PartD
• /
• v.15D no.1
• /
• pp.113-120
• /
• 2008

Web Services composition has gained a considerable attention because of the widespread use of the Web Services and SOA. Recently, various researches on automatic Web Services composition are on going to realize more dynamic and intelligent SOA environments. However, there is no complete solution for automatic Web Services composition now and previous researches have several problems. Automatic composition based on syntactic information has low correctness through incorrect semantic linking. Moreover, many researches make an process as the result of composition which is hard for actual execution. In this paper, improved automatic Web Services composition based on Web Services choreography is proposed. In this system, the correctness is improved and the result of composition is more concrete process.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.6
• /
• pp.9-17
• /
• 2010

In this paper, an automatic cruise system of unmanned boat was developed for surveying water depth in reservoir using GIS (geographic information system)-GPS (global positioning system) Technologies. the automatic cruise system consisted of an automatic path generation program (APGP) and an automatic boat control program (ABCP). A grid processing method with $3{\times}3$ roving window in GIS function was used to develop the APGP. For development of the ABCP, GPS and its coordinate calculation technique were introduced. The developed system was tested to verify the applicability for a sample reservoir, Misan reservoir located on Ansan city of Kyunggi province. From the test results, this study found the APGP generated cruise path automatically according to input condition on grid size of 5 m, 10 m, and 20 m, as well as, the ABCP also tracked well the cruise paths with high position accuracy. Another verification result on surveying time for 20 ha of water area also showed that the new system could survey water depth of reservoir quickly, including very high quality of spatial resolution.