• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.119-131
• /
• 1997

Ball type automatic balancer is used to reduce the vibration caused by unbalance of rotor. In this study, A analytic modeling of a front loaded washing machine with ball type automatic balancer has been suggested theoretically and ADAMS has been used to analyze the dynamic characteristics of automatic balancer. It is found from simulation and experimental results that the automatic balancer suppress the steady state vibration of the washing machine effectively. The test results match well with the simulation results of ADAMS, thereby the dynamic model of ADAMS can be used as virtual prototype to predict the vibration characteristics which could be changed by the modification of design variable and can reduce the design cycle sharply. To maximize the balancing effect of automatic balancer, the friction between balls and race and the deviation between geometric center and rotation center of drum need to be minimized and the optimum design for the stiffness of flange shaft and the angular acceleration of drum should be achieved.

• Journal of Families and Better Life
• /
• v.32 no.6
• /
• pp.59-72
• /
• 2014

The purpose of this study was to examine the impact of peer support on conduct behavior and withdrawal and to investigate the mediating effect of negative automatic thought. The subjects included 461 students(boys 51%, girls 49%) from the 1st to 3rd grades of middle school in Seoul. Conduct behavior and withdrawal was measured by the Korean Youth Self Report and the Conners-Wells'-Adolescent Self Report Scales. Negative automatic thoughts were measured by the Korean Children Youth Automatic Thoughts Scale. Using Amos 20, structural equation modeling was conducted. The findings of the structural equation modeling was that peer support had an impact on conduct behavior and withdrawal. Peer support contributed to a reduction of negative automatic thoughts. Negative automatic thoughts had a mediating effect between peer support and withdrawal or conduct. We suggest that peer support affects conduct behavior and withdrawal through negative automatic thought. We also found gender differences; compared with girls, boys received less support from peers. They also had lower levels of negative automatic thoughts and withdrawal than girls. The further study should be considered to provide more correlation factors of peer support.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1179-1186
• /
• 2003

This study is described about development method and application of developed automatic design program. Automatic design program is the object-oriented program which based on mathematical algorithm. Automatic design program can do mathematic operation according to program contents. Also it can do modeling of shape. Shape modeling method is based on mathematical and geometrical algorithm. And created models can generate NC manufacturing program from CAM software. Also STL file format that is changed form created models can do RP manufacturing.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.149-150
• /
• 2009

The problem of vehicle routing problem(VRP) with pair operations of pick up and delivery are well-known in real applications in logistics networks, as in planning the routes for automatic guided vehicles(AGVs) in an automatic container terminal(ACT), warehouses or in some just-in-time services. This paper will present a formulation to modeling the problem mathematically which can be used to generate optimal routes of carried vehicles in the field to reduce the incurred cost of moving goods. This selected model could be used in (semi-)automatic short-term planning systems for vehicle fleet working in ACT, or in modern warehouses which the long list of requests is parted and sorted in preprocessing orders systems.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1995.03a
• /
• pp.34-39
• /
• 1995

To reduce the shock in shifting the clutches and the brakes in automatic transmission have to be connected smoothly and disconnected rapidly. It is PCSV(Pressure Control Solenoid Valve) that play this role of automatic transmission. In this paper there were two steps in the analysis of the PCSV. The first step was modeling the elctromagnet by the permeance method. The second step was modeling the hydraulic circuit by the pressure differential equation. In addition to this modeling a experiment was performed and the commercial package program was used in order to justify modeling. The result of modeling coincide with the result of experiment and commercial package program. As a result this modeling is usable in analysis of dynamic characteractic of the PCSV.

• MALSORI
• /
• no.43
• /
• pp.137-150
• /
• 2002

Speech segmentation at phoneme level is important for corpus-based text-to-speech synthesis. In this paper, we examine acoustic modeling methods to improve the performance of automatic speech segmentation system based on Hidden Markov Model (HMM). We compare monophone and triphone models, and evaluate several model training approaches. In addition, we employ an energy-based postprocessing scheme to make correction of frequent boundary location errors between silence and speech sounds. Experimental results show that our system provides 71.3% and 84.2% correct boundary locations given tolerance of 10 ms and 20 ms, respectively.

• IE interfaces
• /
• v.2 no.2
• /
• pp.51-62
• /
• 1989

A computer-aided simulation modeling system has been developed to allow the automatic construction of complete discrete simulation models for queueing systems. Three types of knowledge are used in the specification and construction of a simulation modeling: Knowledge of queueing system, simulation modeling, and a target simulation language. This knowledge has been incorporated into the underlying rule base in the form of extraction and construction rule, and implemented via the expert system building tool, OPS5. This paper suggested a knowledge based approach for automatic programming to enable a user who lacks modeling knowledge and simulation language expertize to quickly build executable models.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.6
• /
• pp.373-381
• /
• 2012

An automatic flow and water quality monitoring system was applied to estimate pollutant loads to an urban stream during storm events in DTV (Daeduk Techno Valley), Daejeon, Korea. The monitoring system consists of rainfall gage, ultrasonic water level meter, water quality sensors for DO, temperature, pH, conductivity, turbidity and automatic water sampler for further laboratory analysis. All data are transmitted through on-line system and the monitoring system is designed to be controlled manually in the field and remotely from laboratory computer. Flow rates were verified with field measurements during storm events and showed good agreements. Automatic sampler was used to collect real time samples and analyzed for BOD, COD, TN, TP, SS and other pollutant concentrations in the laboratory. SWMM (Storm Water Management Model) urban watershed model was applied and calibrated using the observed flow and water quality data for the study area. While flow modeling results showed good agreement for all events, water quality modeling results showed variable levels of agreement. These results indicate that current options in the SWMM model to predict pollutant build up and wash-off effects are not sufficient to satisfy modeling of all the rainfall events under study and thus need further modification. This study showed the automatic monitoring system can be used to provide data to assist further refinement of modeling accuracy. This automatic stormwater monitoring and modeling system can be used to develop basin scale water quality management strategies of urban streams in storm events.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.33-42
• /
• 2002

A method of automatic 3D tunnel modeling is proposed. The proposed method used the parametric representation of geometry and a hierarchical and relational data structure. These two bases provide the generalization and extension for 3D tunnel modeling. Especially, these two fundamentals ion the basis iota representing the characteristics of the tunnel structure for analysis. The constant-curvature characteristic is exploited to generate 3D mesh on the tunnel surface. This is attributed to the advantage that any 2D automatic mesh generation algorithm can be applied to 3D mesh modeling.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1996.04a
• /
• pp.70-77
• /
• 1996

Recently many efforts have been made to improve the efficiency of design and production of the structures using the automation system. But, this work has been progressed as independent or partial system. And, the study on the integrated system is not sufficient in application for practical problems yet. This paper deals with the fundamental concept of modeling system and application method on structural modeling. At first, the core of the integrated system is a shape modeling system that can represent the geometric and topological information. This system must be designed as an open system to be combined with each independent automation system. The appropriate concept to realize this system on structural modeling is object oriented modeling and this enables to integrate each automation system successfully, This concept was applied to automatic mesh generation. For shape modeling system, half-edge data structure that is being used in solid modeling was modified to handle the plate structure in the plane. And, to generate the triangular meshes, direct node connection method was used. And, as a result, the integrated system that generate the meshes of two dimensional structure automatically was realized. And, programmed by C++, these systems can be combined with other systems easily and have good reusability.