• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.2
• /
• pp.168-174
• /
• 2008

Diagnosis on setteability based on human operator's experimental knowledge, which could be established by long term operation, is a limit factor to construction of automation control system in wastewater treatment plant. On-line SVI(Sludge Volume Index) analyzer was developed which can measure SV30 automatically by image capture and image analysis method. In this paper, information got by settling process was studied using On-line SVI analyzer for better operation & management of WWTPs. First, SV30 detection algorithm was developed using image capture and image analysis for settling test and it showed that automatic detection is feasible even if deflocculation and bulking was occurred. Second, turbidity assessment model was developed using image analysis.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.4
• /
• pp.343-352
• /
• 1999

Because stow net being used in now is doing throwing net and hauling net through a ship's side, the work is very complicated and the fishing boat needs many seamen and it could cause a loss of lives and ship in stormy weather. We are now using small mesh size 36~500mm and it even catches young fish, so we call it the fishing gear of resource reduction type.Therefore we must make manpower reduction in automatic operation, safe operation of throwing net and hauling net in the stern and the stern-typed stow net of resource management using large mesh. And we performed three-typed model tests to examine the fishing gear. The obtained results are as follows;1. The fishing gear being used in the ship's side type stow net has inappropriate standard and arrangement of the net, resistance increase of the fishing gear and frequent breakdown of the net.2. To supplement the fault of A-typed stow net, we schemed fishing gear developed as both B-type(12-seamed net) and C-types(8-seamed net) of the stern-typed stow net. 3. In model tests, C-typed model net(mesh size 40~1,600mm) was proved good fishing gear because the resistance in accordance with the flowing speed was comparatively small and it's mouth area was broad. 4. A-typed stow net had the spreading device attached to side panel of the net, but the stern-typed stow net had the spreading device consisted of 4 lines far behind about 6m from side panel of the net mouth. In the flowing speed 2knot, the spreading condition of fishing gear was proved batter than the former.

• Journal of the Korea Furniture Society
• /
• v.16 no.1
• /
• pp.53-69
• /
• 2005

This research has a significant meaning to observe and understand the historical condition of a furniture industry and the characteristics of Korean home furniture's formation, ability, skill and materials from 1980s when there were an economic growth and a historical development of Korean home furniture occurred to present days. During 1980s, there was an automatic system available and has enforced and settled the standards on its quality and price in a furniture industry. Also, there was a big trend of black furniture as well as an entrance of corporation and high glossy furniture due to technical cooperation from Europe. In 1990s, there was an entrance of furniture which various techniques was applied due to a high development of the materials and skills, and also various sizes of height and weight and enlargement of acceptance function using highly-technological hardware. After 2000 and now, pro-environmental products is embossed in the Korean home furniture where they added a public issue which is the concept of well being, and A.I and sub material has been pro-environment. There also was a natural unity between nature and technology because of increased usage of trees with its natural patterns, metals, and glasses. For the future development of home furniture design, This problem should be promptly recognized that current home furniture designs are now on the verge of being lack of originality and are just following the market demand and recent trend as it is. Then, there should be a development of its specialized, detailed, unique design as well as a development of advanced materials, production management, distribution, and so on, and carrying out a diversified research continuously. There also should be a systematic education, which is necessary for training specialists to lead the Korean home furniture design industry as well as preparing a basic level for the future without a negligence.

• Information Systems Review
• /
• v.7 no.2
• /
• pp.141-162
• /
• 2005

In this paper, we set up an implementation plan for the Mail Acceptance System (MAS) to be operated more effectively and intelligently. First of all, an as-is analysis for the current MAS is performed for analyzing issues and problems and obtaining user requirements. After the as-is analysis, we perform benchmarking studies on the various postal service providers of the advanced countries. Based on the results from the as-is analysis and benchmarking study, we design a conceptual model for the future MAS. The proposed conceptual model can be classified into three parts: automatic MAS, business MAS, and integrated MAS. Information and automation technologies are applied to design the proposed model for eliminating inefficiencies and inaccuracies in MAS. We identify implementation tasks for realizing the proposed MAS model, evaluate the importance and precedence relationship of the identified tasks for deciding implementation priorities, and finally set up the implementation plan for the future MAS. We can expect that the more efficient and effective MAS can be constructed in the future by performing the proposed implementation plan.

• Fire Science and Engineering
• /
• v.30 no.2
• /
• pp.98-105
• /
• 2016

A fire risk assessment in rack-type warehouse is typically determined based on the following factors: 1. flammability and fire loads for storage of goods, packing materials, and pallet, 2. a ceiling height of warehouse indoor spaces, and 3. height, arrangement, and spacing for storage racks. For appropriately extinguishing and protecting the fire in warehouses, therefore, it is necessary to classify combustibles considering the previously mentioned factors and to develop design Standards for sprinkler system. As the first step to apply automatic sprinkler system to domestic warehouses, this study investigated characteristics for commodity distribution and warehouse configuration using 28 warehouses in five distribution complexes located in Gyeonggi-do, South Korea. In addition, this study analyzed Standards for commodity distribution adopted in USA, Europe, and Japan. Using the field survey analysis, this study was aimed to provide baseline data to prepare for Commodity Classification Standard for warehouses in South Korea.

• Journal of Animal Environmental Science
• /
• v.3 no.1
• /
• pp.49-56
• /
• 1997

Most of Korean broiler farms are constructed with vinyl houses. Such types of broiler farms might be cheaper in terms of cost, but poor in terms of environment condition. According to enlargement of broiler farm size, high value production systems or automatic facilities are introduced in this field. However, investment may not always guarantee the profit of the management. Therefore, it is necessary to undertake the investment analysis before decision making for the investment. Under the assumption that 870 Pyoung(≒$3.3㎡) of a broiler farm within 1,740 Pyoung(≒3.3㎡) of land is built with the producing capacity of 50,000 heads of chicken in a time. The total investment is calculated to be 600 million won(1,000 won≒$1.1), and out of them 58.1% is provided by the owner, 31.6% from the government loan, 5.8% from government subsidy, and 5.3% from other agencies or banks. The expected profit of the broiler farm is 64.6 million won(1,000 won≒$1.1) per year. The IRR calculated is 0.0808 which means that the rate to profit of this project would be 8.1%. This also means that for this investment the interest rate of the capital provided should be less than 8.1% per year. Considering that the current opportunity cost of the own capital is 8.5% this project is not so attractive for those who is going to build broiler farms mainly with their own capital. In other words this project would not be profitable, unless the average interest rate of the loans provided for this project is less than 8.1% per year.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.01a
• /
• pp.202-208
• /
• 2001

One of the most frequent uses of Internet is data gathering. Data can be about many themes but perhaps one of the most demanded fields is the tourist information. Normally, databases that support these systems are maintained manually. However, there is other approach, that is, to extract data automatically, for instance, from textual public information existing in the Web. This approach consists of extracting data from textual sources(public or not) and to serve them totally or partially to the user in the form that he/she wants. The obtained data can maintain automatically databases that support different systems as WAP mobile telephones, or commercial systems accessed by Natural Language Interfaces and others. This process has three main actors. The first is the information itself that is present in a particular context. The second is the information supplier (extracting data from the existing information) and the third is the user or information searcher. This added value chain reuse and give value to existing data even in the case that these data were not tough for the last use by the use of the described technology. The main advantage of this approach is that it makes independent the information source from the information user. This means that the original information belongs to a particular context, not necessarily the context of the user. This paper will describe the application based on this approach developed by the authors in the FLEX EXPRIT IV n$^{\circ}$EP29158 in the Work-package "Knowledge Extraction & Data mining"where the information captured from digital newspapers is extracted and reused in tourist information context.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.10
• /
• pp.101-107
• /
• 2007

In order to introduce remote monitoring system for effective safety management of electrical facilities for general use, which the most of electrical fires and non-inspection problems due to absence are generated development of local device model considering cost and installation is requested. This paper presents local device models for remote electrical safety inspection of electrical facilities for general use and in order to rational model according to installation place of electrical facilities for general use, compare and analysis cost, installation and communication method of local device models. The results show that rational model for remote safety inspection of electrical facilities located in houses, which occupy the must of electrical facilities for general use, is to give safety monitoring ability to low voltage remote meter reading(or automatic meter reading: AMR).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.4
• /
• pp.595-601
• /
• 2011

This study proposed the system to automatically control the optimized raising environment for vegetation, raised in an equipment house, in which u-IT agricultural technology concept was applied. The system consists of environment sensors such as temperature, humidity, etc., biosensors such as EC, PH, etc., and requested automatic control devices, in which they were automatically controlled by the software system. The system is established in client systems, installed in each equipment house and the server system, collecting data from each client system as well. In addition, the system collects each farmer's data through the Internet and 3G network. In this phase, collected raising environment data comes to be analyzed in order to find out the optimized vegetation raising environment, finally, which is visualized and used for consulting each farmer.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.15-16
• /
• 2014

As trade cross the world is increasing these days, safe and effective management of harbour system is becoming important issue. With this background, the development of automatic time-domain simulation programme for ship berthing operation has been being peformed and PD (Proportional Derivative) controller has been used to control the speed and the heading angle of ships. This paper provides feasibility study for developing the time-domain simulation programme for berthing operation of ships with analysing advantages and drawbacks of the two different mathematical models, one is for low advance speed of ships by Kose (1984) and the other is MMG model for normal advance speed, through the simulations with various initial heading angles and positions of the ship.