• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.3
• /
• pp.96-105
• /
• 1992

The use of fixed-point digital signal processors, such as the TMS 320C25, requires scaling of data at each arithmetic step to prevent overflows while keeping the accuracy. A software which automatizes this process is developed for TMS 320C25. The programmers use a model of a hypothetical floating-point digital signal processor and a floating-point format for data representation. However, the program and data are automatically translated to a fixed-point version by this software. Thus, the execution speed is not sacrificed. A fixed-point variable has a unique binary-point location, which is dependent on the range of the variable. The range is estimated from the floating-point simulation. The number of shifts needed for arithmetic or data transfer step is determined by the binary-points of the variables associated with the operation. A fixed-point code generator is also developed by using the proposed automatic scaling software. This code generator produces floating-point assembly programs from the specifiations of FIR, IIR, and adaptive transversal filters, then floating-point programs are transformed to fixed-point versions by the automatic scaling software.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.354-356
• /
• 2008

In this paper, a brief introduction to a new synchronous generator, which has an exciter with hetero poles, is given. A new automatic voltage regulator is designed for the new synchronous generator.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.265-267
• /
• 1993

A control for Steam Generator (S/C) level is very difficult by automatic control mode but also manual control node during plant start up and/or low power level operation with the analog control system because of a non-nominal process responce. The goal of this study is to improve and computerize and applicate for KO-RI #1 Steam Generator level control system.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.4
• /
• pp.268-272
• /
• 2016

A brush-less type synchronous generator is driven by an internal-combustion engine that is used for emergency source. This kind of generator has to maintain output voltage in a range of some degree under the abrupt load irregular conditions such as a full load trip. This paper suggests a suppression method of increasing the output voltage over the rating. Automatic voltage regulator detects excessive rising of output voltage of the generator and supplies the signals to a switch installed in the rotating exciter through the photo-coupler. The current of main field rapidly decreases by additional resistor of the main filed circuit. Therefore, the output voltage of the generator is maintained effectively. The experimental results verified that the excessive value of the output voltage is limited in the range of 7% of the rated voltage.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1164-1166
• /
• 1996

This system is an unified Digital Generator Controller. It has an Electronical Generator Sequencer which control the sequence of a generator, an AVR(Automatic Voltage Regulator) which perform the regulation of generator terminal voltage optimally to user's needs, and an Auto Synchronizer, it can switch the power source on from generally used an the generator to load automatically. It also possesses a Battery Charger which charge a storage battery to appropriate voltage level. Here we describe it's configuration, specifications, the way of control, figure, functions and waveforms.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.12
• /
• pp.3840-3847
• /
• 2000

Electronic Industries Association has set a standard format called CDIF(CASE Data Interchange Format) for exchanging information between CASE tools from 1991. If data used on a CASE tool is represented in CDIF format, then any other CASE tools can use the data by translating CDlF format into their own format. In order to do so, each CASE vendor must provide a translator program from CDIF to its own data format or from its own data to CDIF format. In this thesis, we have implemented a source code generator for translating CASE data format into CDIF format only if they provide how data is stored. This automatic program generator generates CDIF statements using data format used in CASE tools, meta information about stored data and CDIF meta information. In the thesis, the automatic program generator has been implemented with Java and Oracle DBMS with JOBC interface in Sun O/S environment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.8
• /
• pp.1187-1194
• /
• 2017

After North American wide area black out on August 14, 2003, various studies have been conducted to find out the reason of the disaster. One of main reasons was misoperation of generator protection system. Since then, protective coordination between generator protection system and excitation system controls has been hot issue among electrical engineers. Among various generator protection relays, in this paper, we focused on generator overvoltage and overexcitation relay, which protect the over-flux condition of the generator. Thus, at first, we modeled the generator overvoltage, overexcitation relay and detailed power system including excitation system, governor and etc., based on actual field data. And then, we reviewed the protective coordination of generator overvoltage and overexcitation relay using electromagnetic transient program. In addition, we discussed the protective coordination method for redundant protection relays in both automatic voltage regulator and generator side.

• The KIPS Transactions:PartA
• /
• v.19A no.2
• /
• pp.101-112
• /
• 2012

In recently years, distributed real-time software has performed important roles in various areas. Real-time applications should be performed with satisfying strict constraints on response time. Usually real-time applications are developed on the real-time supporting middleware such as TMO(Time-triggered, Message-triggered Object), CORBA/RT, and RTAI. However, it is not easy to develop applications using them since these real-time middleware are unfamiliar to programmers. In this paper, we propose an automatic code generator for real-time application based on TMO in order to reduce development costs. For increasing or reflecting the characteristics of TMO into the design model, SpM and SvM methods are added into the class diagram, which have time constraints as their properties. And behaviors of them are represented as separated regions on state machine diagram in different abstract level. These diagrams are inputted into TMO-based code automatic generator, which generates details of the TMO class. Our approach has advantages for decreasing effort and time for making real time software by automatically generating TMO codes without detailed knowledge of TMO.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.463-467
• /
• 1992

This paper describes the automatic generation of sequence control programs for DCS(Distributed Control System), PLC(Programable Logic Controller) and so on. Since there is no same manufacturing process, it is difficult to standardize sequence programs. We propose the automatic sequence control program generator which is CAD software using knowledge engineering technique.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.9
• /
• pp.100-107
• /
• 2013

Since the West Sea experiences a big difference in tides, the output power of the small marine hydroelectric power plant varies with the tide. When an induction generator is used here for small hydroelectric power, the reactive power capacitor should be installed at the generator main bus to compensate for the changes in power. As such, the sizing method for the power compensation of the induction generator is reviewed and an optimal method for compensation is suggested. The self-excitation minimum capacitor capacity method, which prevents high voltages, and the power factor automatic control method, which retains a power factor of greater than 90% are reviewed. The compensation effect of reactive power is confirmed through a case study.