• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.09a
• /
• pp.27-30
• /
• 2005

A nanoelectromechanical (NEM) switching device based on carbon nanotube (CNT) was investigated using atomistic simulations. The model schematics for a CNT based three-terminal NEM switching device fabrication were presented. for the CNT-based three-terminal NEM switch, the interactions between the CNT-lever and the drain electrode or the substrate were very important. When the electrostatic force applied to the CNT-lever was the critical point, the CNT-lever was rapidly bent because of the attractive foroe between the CNT-lever and the drain. The energy curves for the pull-in and the pull-out processes showed the hysteresis loop that was induced by the adhesion of the CNT on the copper, which was the interatomic interaction between the CNT and the copper.

• Journal of information and communication convergence engineering
• /
• v.19 no.3
• /
• pp.188-197
• /
• 2021

In military operations, an accurate localization system is required to navigate soldiers to their destinations, even in non-GPS environments. The global positioning system is a commonly used localization method, but it is difficult to maintain the robustness of GPS-based localization against jamming of signals. In addition, GPS-based localization cannot provide important terrain information such as obstacles. With the widespread use of embedded sensors, sensor-based pedestrian tracking schemes have become an attractive option. However, because of noisy sensor readings, pedestrian tracking systems using motion sensors have a major drawback in that errors in the estimated displacement accumulate over time. We present a group-based standalone system that creates terrain maps automatically while also locating soldiers in mountainous terrain. The system estimates landmarks using inertial sensors and utilizes split group information to improve the robustness of map construction. The evaluation shows that our system successfully corrected and combined the drift error of the system localization without infrastructure.

• Korea Trade Review
• /
• v.44 no.6
• /
• pp.247-265
• /
• 2019

This research focuses on the influences of FDI on the economic growth of four countries by Mekong river: Vietnam, Laos, Cambodia and Thailand. At the same time, the study also analyzes the contributing of economic growth to attract FDI inflow to these countries. The panel data during the period 1998-2017 were collected from World Bank. Empirical analysis figures out that GDP, mobile phone, labor force are the determinants affecting positive to FDI and vice versa exchange rate, wage are the negative factors. Secondly, FDI, export, exchange rate, government expenditure impact positively on economic growth but inflation and population have negative effect on the economic development. Thirdly, The FDI and economic growth have impact mutually in Vietnam, Laos, Cambodia and Thailand economy. FDI plays a very crucial role in contributing greatly to the economic development of the Mekong sub-region. The economic growth is higher, the FDI inflow is more attractive. From the results, some practical suggestions are offered to enhance the competitiveness in attracting FDI.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.3
• /
• pp.325-331
• /
• 1992

By using the general theoretical framework proposed recently for treating the fluorescence quenching kinetics, we investigate the effect of light pulse intensity on the decay of fluorescence which follows excitation of fluorophors by the light pulse of very short but finite duration. It is seen that conventional theory breaks down when the exciting light pulse has a pulse width comparable to the fluorescent lifetime and its intensity is very high. We also find that even when the light intensity is not too high, conventional theory may fail in either of the following cases: (i) when the quencher concentration is high, (ii) when there is an attractive potential of mean force between the fluorophor and quencher, or (iii) when the energy transfer from the fluorophor to the quencher may also occur at a distance, e.g., via dipole-dipole interaction. The validity of the predictions of the present theory may thus be tested by fluorescence quenching experiments performed under such situations.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.4
• /
• pp.88-98
• /
• 1994

A new local path planning algorithm for free-ranging robots is proposed. Considering that a laser range finder has the excellent resolution with respect to angular and distance measurements, a simple local path planning algorithm is achieved by a directional weighting method for obtaining a heading direction of nobile robot. The directional weighting method decides the heading direction of the mobile robot by estimating the attractive resultant force which is obtained by directional weighting function times range data, and testing whether the collision-free path and the copen parthway conditions are satisfied. Also, the effectiveness of the established local path planning algorithm is estimated by computer simulation in complex environment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.8
• /
• pp.632-636
• /
• 2009

The local oxidation using an atomic force microscopy (AFM) is useful for Si-based fabrication of nanoscale structures and devices. SiC is a wide band-gap material that has advantages such as high-power, high-temperature and high-frequency in applications, and among several SiC polytypes, 4H-SiC is the most attractive polytype due to the high electron mobility. However, the AFM local oxidation of 4H-SiC for fabrication is still difficult, mainly due to the physical hardness and chemical inactivity of SiC. In this paper, we investigated the local oxidation of 4H-SiC surface using an AFM. We fabricated oxide patterns using a contact mode AFM with a Pt/Ir-coated Si tip (N-type, 0.01-0.025 ${\Omega}cm$) at room temperature, and the relative humidity ranged from 40 to 50 %. The height of the fabricated oxide pattern (1-3 nm) on SiC is similar to that of typically obtained on Si ($10^{15}^{\sim}10^{17}$ $cm^{-3}$). We perform the 2-D simulation to further analyze the electric field between the tip and the surface. We demonstrated that a specific electric field (4 ${\times}$ $10^7\;V/m$) and a doping concentration ($^{\sim}10^{17}$ $cm^{-3}$) is sufficient to switch on/off the growth of the local oxide on SiC.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.3 s.36
• /
• pp.267-274
• /
• 2005

This paper presents the fabrication of surface acoustic wave (SAW)-based pressure sensor for long-term stable mechanical compression force measurement. SAW pressure sensor has many attractive features for practical pressure measurement: no battery requirement, wireless pressure detection especially at hazardous environments, and easy other functionality integrations such as temperature, humidity, and RFID. A $41^{\circ}$ YX $LiNbO_3$ piezoelectric substrate was used because of its high SAW propagation velocity and large values of electromechanical coupling factors $K^2$. A silicon substrate with $\~200{\mu}m$ deep cavity was bonded to the diaphragm with epoxy, in which gold was covered all over the inner cavity in order to confine electromagnetic energy inside the sensor, and provide good isolation of the device from its environment. The reflection coefficient $S_{11}$ was measured using network analyzer. High S/N ratio, sharp reflected peaks, and clear separation between the peaks were observed. As a mechanical compression force was applied to the diaphragm from top with extremely sharp object, the diaphragm was bended, resulting in the phase shifts of the reflected peaks. The phase shifts were modulated depending on the amount of applied mechanical compression force. The measured $S_{11}$ results showed a good agreement with simulated results obtained from equivalent admittance circuit modeling.

• Journal of Adhesion and Interface
• /
• v.14 no.4
• /
• pp.183-191
• /
• 2013

In order to elucidate the granular heaping phenomenon, the movement behaviors of 3 different types of granule (millet, sand and thin foil disc) have been investigated by applying the vertical or the rotational vibration to each of the 3 vessels, respectively containing one of the 3 types of granule. In case of vertical vibrations, all of them showed the heaping phenomenon like Gerner's simulation, and that in the order of the millet, sand and thin foil disc, regardlessly of weight. Especially, a heaping of disc granules was proven to be relatively delayed, and that with several small complex clutters. For rotational vibration, the central area of vessel turned out to rise up due to the repulsive force by vessel wall as well as the collision between elastic granules, right after the turning point of vibration. Even spiral pattern was made when the rotational vibration amplitude got higher. From these facts, one can see that the heaping be characterized by the inclusion of attractive granules as well as the vibrational type applied to granule vessel.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.2
• /
• pp.282-289
• /
• 2019

Objective: This study aimed to elucidate whether innovative sous vide treatment has a significant influence on the beef semitendinosus muscle as compared to common sous vide treatment and traditional cooking. Methods: The innovative sous vide treatments were cooked at $45^{\circ}C$ and $65^{\circ}C$ for 6 h (SV45-65), common sous vide treatment at $45^{\circ}C$ and $65^{\circ}C$ for 3 h (SV45 and SV65) and traditional cooking at $75^{\circ}C$ for 30 min (CON75). Water loss and cooking loss, as well as the physical properties (color and shear force) and chemical properties (protein and collagen solubility) of the treated meat, were investigated. Results: The results obtained indicated that the innovative sous vide with double thermal treatment (SV45-65) and cooked with air presence (CON75) resulted to lower $a^*$ and higher $b^*$ values, respectively. The water loss and cooking loss increased when temperature increased from $45^{\circ}C$ to $65^{\circ}C$, and lower water loss was recorded in SV45 and CON75. These samples presented higher water content and revealed strong correlation to protein solubility. Warner-Bratzler shear force (SF) analysis showed the marked interaction between cooking temperature and time. Sample cooked at a high temperature (CON75) and a long period (SV45-65) showed a significantly lower value of SF than sample SV65 (p<0.05). Interestingly, there was no difference in SF values between SV45-65 and CON75. Conclusion: The innovative sous vide treatment with double thermal effect appears an attractive cooking method as compared to common sous vide and traditional cooking method, as it has a potential for improving tenderness values of cooked beef semitendinosus muscle.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.4
• /
• pp.307-325
• /
• 1995

IN order to gain a fundamental data for forecast or control of fish behavior and evaluated the feasibility of an application of the modeling technique to a field, in this paper a numerical model for describing the behavior of fishes in a water tank was presented. The parameters of the model were estimated by using the time-series data on the three-dimensional position of fishes and by applying the least squares algorithm. The estimated parameters were standardized to examine the variation of parameters according to the number of individuals and flow speed that the mean values of parameters were to be zero and their variances were to be one. The results obtained can be summarized as follows: (1) The standardized parameter $a^*$of propulsive force decreased according to increased the number of individuals and the flow speed. (2) The standardized parameter ${k_b}^*$ of interactive force increased according to increased the number of individuals, but decreased according to the flow speed. (3) The standardized parameter ${k_c}^*$ of schooling force increased according to │increased the number of individuals and the flow speed. (4) The standardized parameter │${k_w}^{+*}$│ of repulsive force against wall or bottom increased according to increased the number of individuals, but decreased according to the flow speed. (5) The standardized parameter │${k_w}^{-*}$│ of attractive force against wall or bottom was generally constant according to increased the number of individuals, but increased according to the flow speed. (6) The standardized parameter $\upsilon$ super(*) of damping force increased according to increased the number of individuals, but decreased according to the flow speed.