• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.159-164
• /
• 2005

When an optical pulse propagates through the atmospheric channel, the atmospheric turbulence attenuates and spreads this pulse. This attenuation and broadening of pulse are occurred by the fluctuation in the arrival time of pulse at the optical receiver. This pulse broadening induces the intersymbol interference (ISI) between the adjacent pulses. finally, the adjacent pulses are overlapped and the bit rate and the repeaterless transmission length are limited by the ISI. In digital communication system, therefore, the pulse broadening is more important factor than the attenuation. In this paper, thus, we find the ISI in the atmospheric turbulence as the function of the structure constant for the refractive index fluctuation that presents the strength of turbulence using the temporal momentum function and present it by numerical analysis.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.5
• /
• pp.402-411
• /
• 2000

This study investigates the method to measure the viscoelastic properties of asphalt cement, one of the viscoelastic materials, using the ultrasound. The wave speed and attenuation were measured from $-20^{\circ}C$ to $60^{\circ}C$ at the frequency of 2.25MHz. Then, the storage and loss longitudinal moduli, loss tangent storage and loss longitudinal compliances were found depending on the temperatures based on the linear viscoelastic theory. Stress relaxation, creep, and viscosity were predicted using Maxwell and Voigt-Kelvin viscoelastic models. The validity of superposition principle and shift factor were verified by comparing the present results to the data reported in the literatures.

• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.477-484
• /
• 2024

Experimental investigations on gamma - rays attenuation parameters and dielectric spectroscopic properties were done on a polymeric mixture with chemical composition (100-x) polyethylene + x basalt, where x = 0, 1, 3, 5, 10, and 20 wt%. Using the melting blending technique,six nanocomposite polymeric samples were prepared. The linear attenuation coefficient µ of each prepared set of samples was measured using a gamma-ray spectrometer including High Purity Germanium detector (HPGe) at energies 662.5, 1173.24, and 1332.51 keV. Based on the measured values of (µ) and sample density, the other effective shielding parameters were calculated. The values of µ showed an increase with increasing the dopant ratios from 0.0 up to 20.0 wt%. In addition, the µ values decreased with the photon's energy. The µ values were found 0.0847 up to 0.1175 cm^-1, 0.0571 up to 0.0855 cm^-1, and 0.0543 up to 0.075 cm^-1 at 662.5, 1173.24, and 1332.51 keV. for B0 up to B20, respectively. The ATR spectroscopy was done on the prepared samples, and a good evidence of adding the filler to the pure polyethylene (HDPE) was obtained. Besides, an enhancement in dielectric constant by insertion of basalt NPs also recorded and can be attributed to the large dielectric constant of basalt compared to pure HDPE.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.8
• /
• pp.61-67
• /
• 2010

A characterization procedure for analyzing symmetric coupled MIS(Metal-Insulator-Semiconductor) transmission line is used the same procedure as a general single layer symmetric coupled line with perfect dielectric substrate from the extraction of the characteristic impedance and propagation constant for even- and odd-mode. In this paper, an analysis for a new substrate shielding symmetric coupled MIS structure consisting of grounded crossbar at the interface between Si and SiO2 layer using the Finite-Difference Time-Domain (FDTD) method is presented. In order to reduce the substrate effects on the transmission line characteristics, a shielding structure consisting of grounded crossbar lines over time-domain signal has been examined. Symmetric coupled MIS transmission line parameters for even- and odd-mode are investigated as the functions of frequency, and the extracted distributed frequency-dependent transmission line parameters and corresponding equivalent circuit parameters as well as quality factor for the new MIS crossbar embedded structure are also presented. It is shown that the quality factor of the symmetric coupled transmission line can be improved without significant change in the characteristic impedance and effective dielectric constant.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.294-297
• /
• 2002

For the quality control procedure of diagnostic x ray units, a method for simultaneous measurement of air kerma, half value layer and tube potential was developed utilizing a computed radiography system for intraoral radiography and film badge case. The response of average pixel values under the windows were calibrated by x rays generated at tube potentials from 40 to 140 kV with filtration from 1.5 to 3.7 mmAl. The calibration curves for half value layer and tube potential were derived as functions of attenuation factors by the 1.4 mmAl filter and the 0.2 mmCu filter. The energy dependency of the open window response was corrected by the calibration factor as a function of the attenuation factor by the 1.4 mmAl filter. The uncertainty of the estimated half value layer, tube potential and air kerma were 0.2 mmAl, 3.6 % and 5 %, respectively. It was thus suggested that this system could be applied to quality control program to detect the variation of working condition of x ray units in clinical use.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.2
• /
• pp.156-164
• /
• 2003

STS316L had been used as the structural material for energy environmental facilities, because austenite stainless steels like 316L have superior mechanical properties of which toughness, ductility, corrosion resistant and etc. However, those welded structures are receiving severe damage due to increasing of the aged degradation. Most studies until now have been carried out against fatigue behaviors of weldments, and were not well studied on nondestructive evaluation methods. In this study, the fatigue crack propagation behavior of STS316L weldment usually used for vessels of the nuclear power plant was investigated. Also, the degradation characteristics of 316L stainless steel weldments were evaluated by the ultrasonic parameter such as ultrasonic velocity, attenuation factor and time-frequency analysis. The results of this study can be used as a basic data for the prediction of the fatigue crack life of weldments structures without disjointing or stopping service of structures in service.

• Geophysics and Geophysical Exploration
• /
• v.14 no.3
• /
• pp.249-253
• /
• 2011

Based on intrinsic and scattering quality factor ($Q_i^{-1}$ and$Q_s^{-1}$) obtained from the seismic data of the southeastern Korean Peninsula, the expected coda quality factor (${Q_{Cexp}}^{-1}$) was theoretically calculated using multiple scattering model, and was compared with other quality factors such as $Q_i^{-1}$, $Q_s^{-1}$, and observed $Q_C^{-1}$ obtained by single scattering model. While the ${Q_{Cexp}}^{-1}$ values are typically comparable to the $Q_i^{-1}$ values, the $Q_C^{-1}$ values are different from the ${Q_{Cexp}}^{-1}$ values except for the higher frequency. Future works require to consider depth-dependent attenuation.

• Journal of Korean Society on Water Environment
• /
• v.35 no.2
• /
• pp.165-180
• /
• 2019

Water quality data of 81 lakes in Korea, 2013 ~ 2017 were analyzed. Most water quality parameters showed left-skewed distribution, while dissolved oxygen showed normal distribution. pH and dissolved oxygen showed a positive correlation with organic matter and nutrients, which appeared to be a nonsense correlation mediated by the algae. The ratio of $BOD_5$ and $COD_{Mn}$ to CBOD was 21 % and 52 % in the freshwater lakes, respectively. TOC concentration appeared to be underestimated by the UV digestion method, when salinity exceeds $700{\mu}S\;cm^{-1}$. In terms of nitrogen/phosphorus ratio, the limiting factor for algal growth seemed to be phosphorus in most of the lakes. Chlorophyll ${\alpha}$ increased acutely with decrease of N/P ratio. However, it seemed to be a nonsense correlation mediated by phosphorus concentration, since the N/P ratio depended on phosphorus. The N/P ratio of brackish lakes was lower than that of the freshwater, at the same concentration of phosphorus. It is worth examining denitrification that occurs, in bottom layer and sediment, during saline stratification. $Chl.{\alpha}$ concentration decreased in the form of a power function with increase of mean depth. The primary reason is that deep lakes are mainly at the less-disturbed upstream. However, it is necessary to investigate the effect of sediment, on water quality in shallow lakes. Light attenuation in the upper layer, was dominated by tripton (non-algal suspended solids) absorption/scattering (average relative contribution of 39 %), followed by CDOM (colored dissolved organic matter) (average 37 %) and $Chl.{\alpha}$ (average 21 %).

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2258-2265
• /
• 2024

The present investigation aims to study the role of Pr₂O₃ on the structural, physical, and radiation shielding properties of a dense cadmium lead borate glass. The XRD was used to affirm the glassy amorphous structure of fabricated sample materials. Moreover, the FTIR was used to record the change in the FT-IR spectra due to the addition of Pr₂O₃ in the wavenumber interval between 400 and 4000 cm^-1. The features of glass surfaces and the elemental analyses for the synthesized Pr₂O₃-reinforced cadmium lead borate glasses were performed using a SEM, supported by an energy-dispersive spectrometer. The γ-ray protection capacity was evaluated using the Monte Carlo method in a wide energy interval ranging between 0.015 and 15 MeV. The linear attenuation coefficient (LAC) at 1 MeV was reduced by a factor of 10 % from 0.372 cm^-1 to 0.340 cm^-1. The decrease in the LAC values negatively affected the other shielding properties such as half-value thickness and the transmission factor. Although the linear attenuation coefficient is decreased slightly with the partial substitution of CdO by Pr₂O₃ compound, the fabricated glass samples still have a high shielding capacity compared to the traditional commercial glasses as well as previous similar reported glasses.

• Geomechanics and Engineering
• /
• v.37 no.2
• /
• pp.179-187
• /
• 2024

In this paper, a unified time-dependent constitutive model of Darcy flow and non-Darcy flow is proposed. The influencing factors of flow velocity are discussed, which demonstrates that permeability coefficient is the most significant factor. Based on this, the dynamic evolution characteristics of water inrush during tunneling through fault fracture zone is analyzed under the constant permeability coefficient condition (CPCC). It indicates that the curves of flow velocity and hydrostatic pressure can be divided into typical three stages: approximate high-velocity zone inside the fault fracture zone, velocity-rising zone near the tunnel excavation face and attenuation-low velocity zone in the tunnel. Furthermore, given the variation of permeability coefficient of the fault fracture zone with depth and time, the dynamic evolution of water flow in the fault fracture zone under the variable permeability coefficient condition (VPCC) is also studied. The results show that the time-related factor (α) affects the dynamic evolution distribution of flow velocity with time, the depth-related factor (A) is the key factor to the dynamic evolution of hydrostatic pressure.