• Journal of the Korean housing association
• /
• 제7권2호
• /
• pp.57-68
• /
• 1996

The study is to investiagte the transition of types of Deul-E-Yul-Gae(lift up) windows and doors in Korean traditional architecture which was on the wall batween Dar Chung and Bang. As the result of studying and analysizing the transition of those the following conclusion could be obtained. The first type was to attach windows on the middle of Deul-E-Yul-Gas(lift up) doors, the second type remove windows attached on that or be(Maeng-Jang-Jee) dark paper covered door annexed Bool-Bal-Gee, and the third type to be (Myung-Jang-Jee) bright paper covered door of bottom panel slender ribs which was the most openness. Finally, we could understand the transition which would be changed from the type of(Maeng-Jang-Jee) bright paper covered lift up door of bottom panel slender ribs that had a pliable and open mood.

• Korean Journal of Veterinary Service
• /
• 제34권2호
• /
• pp.187-190
• /
• 2011

The Thoroughbred horse was an approximately 4-years-old castrated male with highly emaciation, nasal epistaxis and subsequently died. Gross necropsy revealed epistaxis and hyperemia on the lung, multiple hemorrhage in muscle, and liver was focally attached to the peritoneum with fibrin. According to polymerase chain reaction (PCR), Equine herpes virus type 1 and 4 (EHV type 1, 4) was detected in the lung and trachea. In bacterial culture from kidney, liver, spleen, muscle and blood, Streptococcus equi subsp. zooepidemicus was isolated. Based on the gross lesion and PCR, this horse was diagnosed as EHV type 1, 4 and S. zooepidemicus coinfection.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• 제54권8호
• /
• pp.371-377
• /
• 2005

This paper Presents the Potential gradient characteristics of structure grounding electrode when a test current flows through grounding electrode. In order to analyze the potential gradient of ground surface on structure grounding electrode, the reduced scale model has been used. The potential gradient has been measured and analyzed for types of structure using the hemispherical grounding simulation system in real time. The structures were designed through reducing real buildings and fabricated with four types on a scale of one-one hundred sixty. The supporter was made to put up with weight of structure and could move into vertical, horizontal, rotary direction. When a test current flowed through structure grounding electrodes, ground potential rise was the lowest value at electric cage type(type B). According to resistivity and absorption percentage In concrete attached to structure, the potential distribution of ground surface appeared differently.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• 제50권4호
• /
• pp.164-169
• /
• 2001

This paper deals with comparison of characteristics of continuous-sheet type low-Tc superconducting (LTS) power supply and discrete-sheet type LTS power supply. These characteristics have been analyzed through experiments. These power supplies consist of two exciters, a rotor, a stator, and a LTS load. A continuous-sheet type has a single continuous niobium (Nb) sheet attached to the inner surface of on the stator. In the case of discrete-sheet type, four separated Nb sheets are used. this experiment is using 1.81 mH LTS magnet load and maximum 30 A dc exciter current. A discrete-sheet type is expected to produce much better pumping rate than a continuous-sheet type. The experimental observations have been compared with the theoretical predictions. In this experiment, the maximum pumping-current has reached about 926 A.

• Food Science and Preservation
• /
• 제17권1호
• /
• pp.79-83
• /
• 2010

The study was conducted to analyze the tag reading and box recognition performance of a gate-type RFID system using the UHF band to detect containers of red pepper. The reading rate of tags attached to container boxes was higher as tags were closer to antennas and the number of antennas was increased. Under optimal conditions, the reading rate was 100% and the range of distance from a carton to an antenna was 1-4 meters. When tags were attached to two sides of a box, the reading rate was lower when the tags were attached at the front and side. This was caused by data collision problems between tags. The reading rate of tags was 71.1-77.8% and the reading rate of red pepper boxes was 97.8-100.0% when the distance between the pallet under the boxes and four units of antennas was 5 meters or less, and when tags were attached at the front and side of boxes.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제26권2호
• /
• pp.111-117
• /
• 1990

The hydraulic line haulers are now widely used to haul the main line, but the other hauling operations are still done manually in most pot fisheries. The oval type hooks which are connected between the loops and the post are tested for basic capability by the universal tension meter in order to develop the automatic separating system. The pots attached to the oval type hooks are separated automatically from the loops while the oval type hooks are running through the trumpet separator with the side roller and the results are as follows: 1. The tension of the large oval hooks (ø3.1mm) for missing pots and the compressive load at the end of hooks by hand are about 60kg and 6kg, and range of tension for passing through the trumpet is 11~15kg. 2. Automatic separating ratio of the pots with the large oval hooks is about 99% when the trumpet separator is attached to front or rear of the side roller in the laboratory. 3. The separating ratio of the pot with the large oval hooks while hauling operation in the sea is about 97% when the trumpet separator is oriented on the port bulwark departed 2m from the side roller.

• Journal of Biosystems Engineering
• /
• 제34권6호
• /
• pp.404-410
• /
• 2009

This study was carried out to develop a self-propelled type explosive subsoiler for improving the root zone soil conditions in orchard and other forest fields. Prototype was designed to be able to inject air and other soil improving material such as lime into soil at the same time, and thus improve the air permeability and drainage of orchard soils to promote the root growth of tree for high quality fruit production. Soil penetration device of explosive subsoiler is composed of air hammer, penetration rob and air injection nozzle. To support the soil penetration device of explosive subsoiler to penetrate vertically, modified Scott-Russel mechanism was used. Timing control device for simultaneous injection of soil improving material with air was attached to the out side wall of air cylinder and as the cylinder move, the soil improving material was injected into soil at the same time. Turning radius of prototype was 2.2-2.3 m with good mobility in sloped land. It took approximately 1 minute for lime injection system to reach the optimum pressure of 9.9 kg/$cm^2$, average 10-20 seconds were required to rupture soil with the depth of 50 cm and 2-3 seconds were required for explosion, so all in all about 1 minute and 20 seconds were required for one cycle of explosion. Maximum soil rupture depth and diameter were 50 cm and 3-4 m respectively depending on the soil type and soil moisture content. For final design of explosive subsoiler inclination angle of lime hopper was increased from 60 degree to 70 degree and the shape of hopper was changed from rectangular cone to circular cone to solve the clogging problem of lime at out let. Agitating system operated by compressed air was attached to the metering device of the prototype, thus more than 90 cc of lime was discharged per cycle from metering device without clogging problems.

• Journal of Korea Society of Industrial Information Systems
• /
• 제23권5호
• /
• pp.19-32
• /
• 2018

This study focuses on an M/M/1 queue with an attached continuous-type inventory. The customers arrive into the system according to the Poisson process, and are served in their arrival order; i.e., first-come-first-served. The service times are assumed to be independent and identically distributed exponential random variable. At a service completion epoch, the customer consumes a random amount of inventory. The inventory is controlled by the traditional (s, S)-inventory policy with a generally distributed lead time. A customer that arrives during a stock-out period assumed to be lost. For the number of customers and the inventory size, we derive a product-form stationary joint probability distribution and provide some numerical examples. Besides, an operational strategy for the inventory that minimizes the long-term cost will also be discussed.

• Journal of the Korea Concrete Institute
• /
• 제15권3호
• /
• pp.454-461
• /
• 2003

This study addressed a procedure to carry out an experimental study on a behavior of simple and continuous concrete beams. For this purpose, sample concrete beams were fabricated and sensors for the measurement of strains and deflections were attached both on the surface of the beams and inside them. Two types of sensors were used to measure strains associated with loading: electric resistance strain sensors and fiber optic sensors. Displacement gauges were also attached on the bottoms of beams to investigate the behavior of beams more rationally. The behavior of the beams was then evaluated throughout the results measured from different sensors while they were subject to steady loading up to failure. From results of this study, it was found that concurrent use of sensors and displacement gauges is helpful in investigating the behavior of concrete beams more effectively. Especially, combined-type strain sensors specifically fabricated in this experiment were found not to be affected by the occurrence of cracks so significantly and to be very effective in monitoring strains of concrete structure. It was also observed that beams show nonlinear force-displacement relationship and reinforcing bars take charge of resisting the external force once cracks occur in concrete beams.

• Journal of the Korean Institute of Rural Architecture
• /
• 제17권1호
• /
• pp.65-72
• /
• 2015

Recently the concerns of aging & care according to the aged Society were on the increase about Home for the elderly facility. In order to moment, the purpose of this study is to analyze planning direction and Architectural Environments in medium and small scale Elderly Care Facilities. This survey are used to investigate with latest building data, which is Long-term Care Insurance Code for the Elderly was started on July 2008 in Korea. The results of this paper are as follows. First, various type of home for the elderly and the elderly group homes are spread out, attached to day care center type, nursing home type, city region type, countryside rural type, near the university and remodeling type. Secondly, per capita room area-$6.32m^2$ are sufficient in regal comparison with $6.6m^2$. Thirdly, Sunlight environments is inappropriate condition as south direction proportion-41.95%. According to the present situation various facility type and model for our baby boomers generation should be more developed with preemptive systems of senior welfare concept.