• International Journal of Precision Engineering and Manufacturing
• /
• 제3권4호
• /
• pp.43-53
• /
• 2002

Polishing a die that has free-form surfaces is a time-consuming and tedious job, and requires a considerable amount of high-precision skill. In order to reduce the polishing time and cope with the shortage of skilled workers, a user-friendly automatic polishing system was developed. The polishing system is composed of two subsystems, a three-axis machining center and a two-axis polishing robot. The system has five degrees of freedom and is able to keep the polishing tool in a position normal to the die surface during operation. A sliding mode control algorithm with velocity compensation was proposed to reduce tracking errors. Trajectory tracking experiments showed that the tracking error can be reduced prominently by the proposed sliding mode control compared to a PD (proportional derivative) control. To evaluate the polishing performance of the polishing system and to and the optimal polishing conditions, the polishing experiments were conducted.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.95-98
• /
• 2003

The physics of the plume-induced shock and separation particulary at a high plume to exit pressure ratio and supersonic speeds up to Mach 3.0 with aid without a passive control method, porous extension, were studied using computational techniques. Mass-averaged Navier-Stokes equations with the RNG k-$\varepsilon$ turbulence model were solved using a fully implicit finite volume scheme and a 4-stage Runge-Kutta method. The courol methodology for plume-afterbody interactions is to use a perforated wall attached at either the nozzle exit or the edge of the missile base. The Effect of porous wall length on plume interference is also investigated. The computational results show the main effect of the porous extension on plume-afterbody interactions is to in the plume from strongly underexpanding during a change in flight conditions. With control, a change in porous extension length has no significant effect on plume interference.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1730-1735
• /
• 2003

The plume-induced shock wave is a complex phenomenon, consisting of plume-induced boundary layer separation, separated shear layer, multiple shock waves, and their interactions. The knowledge base of plume interference effect on powered missiles and flight vehicles is not yet adequate to get an overall insight of the flow physics. Computational studies are performed to better understand the flow physics of the plume-induced shock and separation particularly at high plume to exit pressure ratio. Test model configurations are a simplified missile model and two rounded and porous afterbodies to simulate moderately and highly underexpanded exhaust plumes at the transonic/supersonic speeds. The result shows that the rounded afterbody and porous wall attached at the missile base can alleviate the plume-induced shock wave phenomenon, and improve the control of the missile body.

• 대한수학교육학회지:학교수학
• /
• 제18권3호
• /
• pp.611-623
• /
• 2016

본 연구는 2009 개정 수학과 교육과정의 <기초수학>, <수학I>, <수학II>와 교과서를 토대로 용어 기호의 정의에서 학생들이 어려움을 겪을 수 있는 점을 짚어 보고 용어 기호의 선정과 앞으로의 개선 과제를 제안하였다. 현재 지적된 문제점을 개선할 수 있는 과제로 교육과정 개발에서 용어 기호에 대한 심도 있는 분석과 논의가 필요하고 그 결과가 공개될 필요가 있으며, 교과서 검정에서 용어 및 기호에 대한 기준을 적절히 마련하기 위해 노력할 필요가 있고, 수학 용어 및 기호의 정의 방법에서 학교급간 정의방법의 차이, 특히 초등학교와 중등학교의 정의 방법의 차이를 검토할 필요가 있으며, 수학과 교육과정에서 용어 기호의 교체나 교과서에 소개할 방안을 고려할 것을 제안하였다.

• 천문학회보
• /
• 제38권2호
• /
• pp.68.2-68.2
• /
• 2013

Camera for QUasars in EArly uNiverse (CQUEAN) is an optical CCD camera system made by Center for Exploration of the Origin of the Universe (CEOU). CQUEAN is developed for follow-up observation of red sources such as high-redshift quasar candidates ($z{\geq}5$), gamma-ray bursts (GRB), brown dwarfs and young stellar objects. The CQUEAN is composed of a science camera with deep-depletion CCD chip which is sensitive at around $1{\mu}m$, a set of custom-made wide-band filters for detection of quasar candidates at z~5, and a guide camera. A focal reducer was developed to secure $4.8^{\prime}{\times}4.8^{\prime}$ field of view, and an in-house user software for efficient data acquisition. CQUEAN was attached to 2.1m Otto Struve Telescope in McDonald Observatory, USA, in August 2010. About 1000 quasar candidates including 3 confirmed with follow-up spectroscopy, have been observed so far, and many high-z galaxy cluster candidates, GRBs and supernovae were also observed. And monitoring of HBC 722, a young stellar object, is under way since 2011. Further enhancement of CQUEAN including the introduction of narrow-band filters is planned.

• 한국산업융합학회 논문집
• /
• 제8권1호
• /
• pp.25-29
• /
• 2005

Titanium specially has high specific strength, excellent mechanical properties as fatigue strength and fracture ductility, good corrosion resistance, and therefore are broadly applied to the various fields. It is required the developmennt for the skills of wire-cut electrical discharge machining(WEDM), but the WEDMed surface was found to be worst due to the attached components of wire. Therefore precision maching method like lapping is necessary for getting high quilty surface. Roughness of lapped surface, surface hardness to each process depth and improved method of surface shape were stuided experimentally, by changing of grain size of diamond lap material and lapping pressure with constant speed in lapping process.

• 한국수소및신에너지학회논문집
• /
• 제22권6호
• /
• pp.942-948
• /
• 2011

The performance of a supercharger for vehicle using solar cell attached on the exterior of a car, an auxiliary battery, and an air compressor was evaluated in this study. This supercharger is composed of a solar cell of 40W, a battery of 60 Ah, an air compressor of 17 A, 8 $kgf/cm^2$ and an air tank of 8L. It takes about 6 days to charge the battery with the solar cell and the high pressure air of 8L can be supplied about 70 times to engine intake with this battery. The intake pressure increased by about 20~40% with this supercharger. The vehicle power and accelerating performance are enhanced by 87% and 50% each in the low speed range. But the performance improved little in the high speed range because of the rather constant flow rate of air supplied by this type of supercharger.

• Computers and Concrete
• /
• 제17권6호
• /
• pp.831-848
• /
• 2016

This study aims to characterize the multiple cracking behavior of HTPP-ECC (High tenacity polypropylene fiber reinforced engineered cementitious composites) by Digital Image Correlation (DIC) Method. Digital images have been captured from a dogbone shaped HTPP-ECC specimen exhibiting 3.1% tensile ductility under loading. Images analyzed by VIC-2D software and ${\varepsilon}_{xx}$ strain maps have been obtained. Crack widths were computed from the ${\varepsilon}_{xx}$ strain maps and crack width distributions were determined throughout the specimen. The strain values from real LVDTs were also compared with virtual LVDTs digitally attached on digital images. Results confirmed that it is possible to accurately monitor the initiation and propagation of any single crack or multiple cracks by DIC at the whole interval of testing. Although the analysis require some post-processing operations, DIC based crack analysis methodology can be used as a promising and versatile tool for quality control of HTPP-ECC and other strain hardening composites.

• 수산해양교육연구
• /
• 제11권1호
• /
• pp.69-87
• /
• 1999

This study had been analysed the establishment, the closing and the actual conditions of the fisheries school according to the four times revision and promulgation of the law of education of korea which were devided by the early term (the first Chosun educational decree), the middle term (the second Chosun educational decree) and the last term (the third and fourth Chosun educational decree), and also been investigated how the fisheries education of the school had been acted to the mobocracy and the assimilation policy and together with it's back ground through this analysis. The aim of this study is to contribute to the study of the history of the fisheries school education, analysis of change of the fisheries school education according to practical application of the Chosun educational decree. The summary of the characteristic of the each term are as under. First, in the early term of the fisheries education under the first Chosun educational decree, Experts were despatched to the each province with donated money from emperor and opened seasonal the fishing training centre, a kind of social fisheries education, and trained directly fishing technic and were going to train fisheries trainees regularly under name of elementary fisheries school. Japanese imperialism attached great importance to the vocational education in order to snack economical products from colonized Korea but actually had a purpose to train low quality technician who follow blindly their colony policy of Japanese imperialism. The fisheries schools in the circle of system in early time of Japanese imperialism, Kunsan public elementary fisheries school was established in April 1915, Yosu public elementary fisheries school was established ill May 1917 and Kyungnam Tongyoung training school was established in March 1917. Secondly, After 3.1 movement, the Japanese imperialism established an appeasement policy so called cultural politics and continued assimilation policy with skilful methods. After revision of the second Chosun educational decree, the Elementary vocational school was changed as the vocational training school. The school of fisheries education in middle of Japanese imperialism trained low quality technicians to snack fisheries resources from colonized Korea. After the middle of Japanese imperialism they paid attention on training fisheries technician through fisheries school rather than training school. With high interest and crowded volunteers, Kunsan public fisheries school was promoted in 1922, Tongyoung public fisheries school was promoted in 1923, Yongampo fisheries training school established in 1922 was promoted as Yongampo public fisheries school in 1926. Thirdly, in the time of the third and fourth Chosun educational decree, the end of Japanese imperialism, they met Pacific war after Japan vs China war. During the war time they considered the vocational school as the source of supply for materials and manpower and consequently had to expanded vocational education and systematically despatched students to war field and practiced military training. In 1938, Namhae public fisheries school was established and Chungjin fisheries school was permitted. But in order to supply manpower to Pacific war, the study period of Yosu public fisheries school was shorten from 5 years to 4 year in 1943 and also that of Tongyoung public fisheries school shorten in 1944.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제34권4호
• /
• pp.485-506
• /
• 2020

본 연구는 교사의 수학적 신념이 학생의 수학적 신념에 주는 영향을 잠재집단회귀모델(Latent Class Regression Model; LCRM)을 통해 분석하였다. 분석을 위해 본 연구는 잠재집단분석(Latent Class Analysis; LCA)을 통해 교사 60명과 그 교사에게 배우는 학생 1850명의 수학적 신념을 각각 분류한 강성권, 홍진곤(2020)의 연구결과를 활용하였다. 분석결과, '수학의 본질'에 대한 교사의 신념은 학생의 '수학교과', '수학문제해결', '수학학습' 신념에 영향을 주었다. 또한, '수학의 교수'와 '수학적 능력'에 관한 교사의 신념은 학생의 '수학교과', '수학문제해결', '자아개념' 신념에 영향을 주었다. 이를 통해 본 연구는 교사의 수학적 신념이 학생의 수학적 신념에 실질적인 영향을 끼친다는 것을 통계적으로 실증하였다. 이러한 연구결과는 교사들의 연수와 관련한 목표와 내용의 설정에 도움을 줄 수 있을 것이다.