• 한국환경과학회지
• /
• 제5권4호
• /
• pp.453-462
• /
• 1996

This study was conducted to evaluate the level of atmospheric heavy metals and the relationship of that concentration with weather conditions. This research monitored the concentration of Total Suspended Particulates (TSP) at every three hours by using High Volume Air Sampler from December 24th, of 1995 to Febuary 20th, 1996 in Kimhae area, which recently became a rapidly growing residential and industrial sitc. The items such as air-temperature, relative humidity, radition, wind speed, and wind direction were monitored by using Atmospheric Weather System at the same time. From the collected TSP, the concentration of heavy metals were analyzed by using the Atomic Absorption Spcetrophotometry. The mean concentration of TSP was 110.4 $\mu\textrm{g}$/$m^3$, and the mean concentration of lead (Pb), copper(Cu), chromium (Cr), manganese (Mn), cadmium (Cd), were 0.837 $\mu\textrm{g}$/$m^3$, 0486 $\mu\textrm{g}$/$m^3$, 0.264$\mu\textrm{g}$/$m^3$). The concentration of Pb and Mn was higher in the moring and that of Cu, Cr and Cd was higher in the afternoon and the evening. Regarding the relationship between the concentration of pollutants and weather condition, the-concentration TSP revealed positive correlation with temperature, humidity, wind speed, but negative correlation with tradition (p<0.01). The concentration of Mn revealed positive correlation with temperature and humidity, but negative correlation with wind speed (p<0.01). And the the concentration of pollutants and weather condition revealed higher correlation within the same time period. In summary, the paralleled mornitoring of air conditions and weather condition should be recommended to. get the correct informations concerning the pollution and to prevent the deterioration of air conditions.

• 한국안전학회지
• /
• 제12권2호
• /
• pp.87-94
• /
• 1997

If sodium azide is impinged by certain reasons, it will be produced explosives by heavy metals and toxic materials. But it is used propellent for inflating automotive safety bags and the other chemical manufacturing purpose. The investigation of thermal hazard potential of sodium azide itself and with polymers ate very important because some parts of automotives, transporting vessels of reactive chemicals and many any other constituents of structures in factories are made of polymers. The range of decomposition temperatures are about $360-380^{\circ}C$, even if it depends on heating rate and sample weight. Thermal decomposition heat of sodium azide in air is higher than in nitrogen atmosphere, because the former is included oxidizing heats of sodium metal which is made by decomposition of sodium azide to end. Especially decomposition temperature of polymers are increased on the order of bonding energy between atoms in hydrocarbon moleculars.

• 대한환경공학회지
• /
• 제30권11호
• /
• pp.1111-1115
• /
• 2008

아산 호서대 지역에서 대기 중 미세먼지를 측정하여 PM$_{2.5}$와 PM$_{10}$의 이온성분과 중금속성분 분석을 통해 농도 특성을 분석하고 황사 발생에 따른 농도특성 변화를 관찰하였다. 황사시 미세먼지의 입경별 평균농도는 비황사시에 비해 큰 증가를 보였으나, PM$_{2.5}$ 비율은 79.7%에서 40.1%로 감소하였다. 이러한 원인은 2.1 $\mu$m를 기준으로 조대 입자와 미세 입자로 구분하여 질량농도를 분석한 결과 황사시 조대 입자가 크게 증가하여 PM$_{2.5}$ 비율이 상대적으로 낮아지기 때문인 것을 알 수 있었다. 황사시 이온 성분 농도의 변화는 미세입자 영역에서 큰 변화를 보이지 않았으나 조대입자 영역에서는 Ca$^{2+}$이온이 약 40배 정도 증가하였고 Na$^+$, SO$_4{^{2-}}$이온 순으로 높은 증가율을 나타내었다. 또한, 중금속 성분의 분석 결과 황사시 Mn, Fe, Zn, Al 순으로 증가폭이 컸으나 질량농도로 보았을 때 Al이 가장 큰 증가량을 보였다.

• 한국농공학회논문집
• /
• 제64권3호
• /
• pp.25-32
• /
• 2022

To understand the distribution characteristics of PM_2.5 concentration in the Saemangeum Reclamation Area and nearby areas, three points of the background area, the occurrence area, and the affected area were selected and samples were collected for each season. The chemical composition was determined. As a result of analyzing the chemical composition contained in PM_2.5, NO₃^- (7.2 ㎍/m³), SO₄^2- (4.3 ㎍/m³), NH₄+ (4.3 ㎍/m³), OC (2.5 ㎍/m³), Si (1.3 ㎍/m³) m³) and EC (0.5 ㎍/m³) seemed to be the main components, and NO₃-, SO₄^2-, NH₄⁺, which are components that form secondary particles, occupied a large proportion. The composition ratio of PM_2.5 was investigated in the order of ion component (56.8%) > Unknown (27.4%) > carbon component (11.8%) > heavy metal component (4.0%). During the PM_2.5 high concentration case days, the ionic component accounted for 90.7% during atmospheric stagnation cases, whereas the chemical composition ratio was in the order of ionic component (51.7%) > heavy metal component (41.5%) > carbon component (6.8%) during yellow dust cases. It was found that the characteristic of PM_2.5 in the Saemangeum reclaimed land and surrounding areas is mainly influenced by outside (domestic and overseas) throughout the year. Ion components accounted for the largest portion of PM_2.5 components in this area, but there were few sources of SOx and NOx emission in the Seamangeum area, which are precursors for secondary particle formation. Therefore, it is judged that most of these are generated and influenced as a secondary reaction in the atmosphere from the outside.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1190-1199
• /
• 2014

As a considerable, experimental approach, an autocarriage type of $CO_2$ welding machine and a MIG(metal inert gas) welding robot in the inert gas atmosphere were utilized in order to realize Al 5083 welding to hull and relevant components of green leisure ships. This study aims at investigating the effect of welding conditions(current, voltage, welding speed, etc.) on thermal deformation that occurs as welding operation and tensile characteristics after welding, by using Al 5083, nonferrous material, applied to manufacturing of eco-environmental leisure ships. With respect to welding condition to minimize the thermal deformation, 150 A and 16 V at the wire-feed rate of 6 mm/sec were acquired in the process of welding Al 5083 through an auto carriage type of $CO_2$ welding feeder. As to tensile characteristics of Al 5083 welding through a MIG welding robot, most of tensile specimens showed the fracture behavior on HAZ(heat affected zone) located at the area joined with weld metal, except for some cases. Especially, for the case of the Al specimen with 5 mm thickness, 284.62 MPa of tensile strength and 11.41 % of elongation were obtained as an actual allowable tensile stress-strain value. Mostly, after acquiring the optimum welding condition, the relevant welding data and technical requirements might be provided for actual welding operation site and welding procedure specification (WPS).

• 한국산림과학회지
• /
• 제88권4호
• /
• pp.510-522
• /
• 1999

대기 오염물질인 $SO_2$, $SO{_4}^{-2}$, $NO{_3}^-$, $Cl^-$가 분진(粉塵)이나 강우와 함께 지표에 이르러 토양에 흡수 축적되고 중금속은 생활하수 및 음식 쓰레기, 공장 폐기물, 비료, 살충제 및 살균제, 채광활동 등에서 여러 가지 경로인 물질의 순환과정을 통해서 수권(水圈)이나 토양에 축적된다. 대기오염물질인 $SO{_4}^{-2}$, $NO{_3}^-$, $Cl^-$와 중금속은 식물 필수영양소(Co, Cu, Mo, Mn, Ni, V, Zn)와 인체나 동물에 유독성을 갖는 중금속(Cd, As, Pb, Hg, Cr, Se, Mo, Co) 중에서 Se, Mo, Zn, Cd, Pb, Mn, Cr, Co, V, As, Cu, Ni을 분석대상으로 하였고 이들의 도시에서 오염상태를 알기 위하여 도시지역인 광주 시내에 식재되어 있는 가로수 및 녹지대조성 수종과 대조구로서 광주에서 23km 떨어져 있는 나주시 산포면 산제리 소재 전라남도 산림환경연구소 구내에 생육하고 있는 수종을 대상으로 분석하였다. 분석대상 수종은 은행나무, 상수리나무, 개잎갈나무, 양버즘나무, 아까시나무, 오리나무, 메타세쿼이아, 느티나무, 벗나무, 소나무를 대상으로 하여 뿌리 및 잎 그리고 이들이 생육하고 있는 토양에 함유되어 있는 대기오염물질과 중금속의 함량을 분석 측정한 결과 다음과 같았다. 1. $SO{_4}^{-2}$, $NO{_3}^-$, $Cl^-$가 도시지역의 토양이 시외지역 토양보다 높은 함량을 보이고 있으며 $SO{_4}^{-2}$, $NO{_3}^-$이온은 뿌리보다 잎의 함량이 더 높았다. 2. $SO{_4}^{-2}$, $NO{_3}^-$이온의 흡수량이 은행나무, 아까시나무, 느티나무, 상수리나무, 양버즘나무가 많아 도시 가로수나 녹지대 조성수종으로 적합하다고 생각된다. 3. 토양에 중금속의 함유량은 도시지역이나 시외지역에서 Mn > Zn > V > Cr > Pb > Ni > Cu > Mo> Cd 순이고, Mn, Zn, Pb, V, Cu는 도시토양이 시외지역 토양보다 많은 양이 검출되었는데 이는 각종 오염원으로부터 오염된 결과로 생각된다. 뿌리와 잎에 함유된 중금속의 함유량도 Mn>Zn>Cr>Cu>V>Ni 순으로서 V의 순위가 다를 뿐 토양의 함유량의 크기순서와 같았다. 4. Mn과 Zn은 식물체에 흡수를 서로 방해하는 Antagonism 관계에 있는 것으로 알려져 있으나 본 연구에서는 Antagonism을 인정 할 수 없었다. 5. Sn, Mo, Cd, Pb는 도시지역이나 시외지역 토양에 축적되어 있으나 수목에 흡수되지 않아 뿌리나 잎에서 검출되지 않았다. 또 Se, Co와 As는 토양, 잎, 뿌리에서 검출되지 않았다. 6. 도시지역이나 시외지역에서 조사된 10개 수종 중 중금속의 흡수력이 특별히 월등하다고 인정할만한 수종이 없었다.

• 대한기계학회논문집B
• /
• 제20권6호
• /
• pp.1983-1993
• /
• 1996

For selected (pure and compound) metallic species effects of saturation ratio, temperature, particle size and number density on condensation mechanisms are first reviewed. The tendencies for vaporization and condensation differ between metallic species because of the significant differences in their saturation pressures. Then particle pressure of a metal vapor species at incineration temperature is calculated by simplifying waste as a compound of methane, chlorine and small amounts of metals and assuming a thermodynamic equilibrium state. Next the condition is assessed for which supersaturation of combustion gases by the species above the critical level for homogeneous condensation may occur, when the gases contain a large number of pre-existing particles such as entrained ashes. Regardless of the presence of chlorine in the waste, the homogeneous condensation of PbO vapors may occur, depending on number density of the pre-existing particles. However, when chlorine exists in the waste, the homogeneous condensation of PbCl$_2$vapors does not occur, which is similar to the case of Cd and Hg vapors. Thus these highly volatile species, PbCl$_2$, Cd, and Hg, may emit to atmosphere as vapor phase. In general, for reducing the emission of hazardous metallic species into the atmosphere, the number density of pre-existing particles has to be increased. For fixed particle number density, the temperature drop rate must be kept in low if the temperature at which a condensable vapor species emits from a incineration system is fixed, while the temperature drop rate must be kept in high if the residence time for which a condensable species stays in the system is fixed.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제10권3호
• /
• pp.32-37
• /
• 2005

서울 및 경기지역의 문화재청 관할(창덕궁, 종묘, 서오릉, 동구릉) 왕릉지역에 대한 토양조사를 실시하여 산림환경변 화가 토양 이화학성에 미치는 영향을 연구하였다. 창덕궁, 종묘, 서오릉, 동구릉의 4개 왕릉 지역의 토양화학성을 비교하기 위하여 pH, 유기물, 유효인산, 치환성 칼슘, 칼륨, 마그네슘, 양이온치환용량, 염기포화도, 전질소를 분석하였고 토양 내 오염도를 측정하기 위해 토양 내 중금속(Cd, Ph, Cu) 함량을 분석하였다. 또한 토양의 답압정도를 평가하기 위하여 토양경도, 통기성, 공극율, 기상율, 가비중을 측정하여 다음과 같은 결론을 얻었다. 1) 토양의 답압정도를 나타내는 지표인 토양경도와 통기성은 종묘와 서오릉지역이 창덕궁과 동구릉지역보다 불량하였으며 이는 출입하는 내방객의 증가와 지속적인 토양관리의 차이로 나타나는 현상으로 사료된다. 특히 서오릉지역의 토양경도와 통기성을 산림지역, 출입통제지역, 답압지역으로 구분하여 조사한 결과 산림지역이 답압지역보다 양호한 것으로 나타나 지속적인 토양관리를 위한 안식년제를 도입할 필요성이 제기 되었다. 2) 4개지역의 토양 pH는 표토가 심토보다 높게 나타났으며, 종묘와 서오릉지역의 토양 pH가 창덕궁 및 동구릉지역 보다 높게 나타난 것은 시비에 기인한 것으로 판단된다. 서오릉의 산림지역의 경우 토양 pH와 유기물 함량이 답압지역보다 높게 나타나 시비 등 토양관리가 식물생육환경으로서의 토양개선에 효과적임을 반영하였다. 3) 4개지역의 토양 내 중금속함량은 서오릉 및 동구릉지역에 비해 창덕궁 및 종묘지역에서 높게 나타나 서울 도심권에 위치할수록 대기로부터 유입된 중금속류의 축적이 많음을 시사하였다.

• 대한조선학회논문집
• /
• 제51권6호
• /
• pp.548-555
• /
• 2014

As a considerable, experimental approach, an Auto-carriage type of $CO_2$ welding machine and a MIG(Metal Inert Gas) welding robot under inert gas atmosphere were utilized in order to realize Al 5083 welding applied to hull and relevant components of green Al leisure ships. This study aims at investigating the effect of welding conditions(current, voltage, welding speed, etc) on thermal deformation that occurs as welding operation and tensile characteristics after welding, by using Al 5083, non-ferrous material, applied to manufacturing of co-environmental Al leisure ships. With respect to welding condition to minimize the thermal deformation, 150A and 16V at the wire-feed rate of 6mm/sec were acquired in the process of welding Al 5083 through an auto carriage type of $CO_2$ welding feeder. As to tensile characteristics of Al 5083 welding through a MIG welding robot, most of tensile specimens showed the fracture behavior on HAZ(Heat Affected Zone) located at the area joined with weld metal, except for some cases. Especially, for the case of the Al specimen with 5mm thickness, 284.62MPa of tensile strength and 11.41% of elongation were obtained as an actual allowable tensile stress-strain value. Mostly, after acquiring the optimum welding condition, the relevant welding data and technical requirements might be provided for actual welding operation site and welding procedure specification(WPS).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.5-5
• /
• 2009

Thin-film-transistors (TFTs) that can be prepared at low temperatures have attracted much attention because of the great potential for transparent and flexible electronics. One of the mainstreams in this field is the use of organic semiconductors such as pentacene. But device performance of the organic TFTs is still limited due to low field-effect mobility and rapid degradation after exposing to air. Alternative approach is the use of amorphous oxide semiconductors as a channel. Amorphous oxide semiconductors (AOSs) based TFTs showed the fast technological development, because AOS films can be fabricated at room temperature and exhibit the possibility in application like flexible display, electronic paper, and larges solar cells. Among the various AOSs, a-IGZO has lots of advantages because it has high channel mobility, uniform surface roughness and good transparency. [1] The high mobility is attributed to the overlap of spherical s-orbital of the heavy post-transition metal cations. This study demonstrated the effect of the variation in channel thickness from 30nm to 200nm on the TFT device performance. When the thickness was increased, turn-on voltage and subthreshold swing was decreased. The a-IGZO channels and source/drain metals were deposited with shadow mask. The a-IGZO channel layer was deposited on $SiO_2$/p-Si substrates by RF magnetron sputtering, where RF power is 150W. And working pressure is 3m Torr, at $O_2/Ar$ (2/28 sccm) atmosphere. The electrodes were formed with electron-beam evaporated Ti (30 nm) and Au (70 nm) bilayer. Finally, Al (150nm) as a gate metal was thermal-evaporated. TFT devices were heat-treated in a furnace at 250 $^{\circ}C$ and nitrogen atmosphere for 1hour. The electrical properties of the TFTs were measured using a probe-station. The TFT with channel thickness of 150nm exhibits a good subthreshold swing (SS) of 0.72 V/decade and on-off ratio of $1{\times}10^8$. The field effect mobility and threshold voltage were evaluated as 7.2 and 8 V, respectively.