• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권2호
• /
• pp.239-244
• /
• 2017

We experimentally investigate the physical mechanism for asymmetrical degradation in amorphous indium-gallium-zinc oxide (a-IGZO) thin-film transistors (TFTs) under simultaneous gate and drain bias stresses. The transfer curves exhibit an asymmetrical negative shift after the application of gate-to-source ($V_{GS}$) and drain-to-source ($V_{DS}$) bias stresses of ($V_{GS}=24V$, $V_{DS}=15.9V$) and ($V_{GS}=22V$, $V_{DS}=20V$), but the asymmetrical degradation is more significant after the bias stress ($V_{GS}$, $V_{DS}$) of (22 V, 20 V) nevertheless the vertical electric field at the source is higher under the bias stress ($V_{GS}$, $V_{DS}$) of (24 V, 15.9 V) than (22 V, 20 V). By using the modified external load resistance method, we extract the source contact resistance ($R_S$) and the voltage drop at $R_S$ ($V_{S,\;drop}$) in the fabricated a-IGZO TFT under both bias stresses. A significantly higher RS and $V_{S,\;drop}$ are extracted under the bias stress ($V_{GS}$, $V_{DS}$) of (22 V, 20V) than (24 V, 15.9 V), which implies that the high horizontal electric field across the source contact due to the large voltage drop at the reverse biased Schottky junction is the dominant physical mechanism causing the asymmetrical degradation of a-IGZO TFTs under simultaneous gate and drain bias stresses.

• The Journal of Korean Physical Therapy
• /
• 제27권3호
• /
• pp.169-173
• /
• 2015

Purpose: This study aimed to improve the asymmetrical weight-bearing ratio, by applying different repetitive sit-to-stand training methods to the paretic-side foot of hemiplegic patients, as well as to provide the necessary information for applying balance training with hemiplegic patients. Methods: The subjects were divided into two groups: a spontaneous foot group and an asymmetrical foot group. They all performed repetitive sit-to-stand training five times a week for a total of six weeks. The sit-to-standing movement was studied using standardized clinical tests. The Biodex Balance System, Time up and go test (TUG), 5 times sit-to-stand test (5XSST), and functional reach test (FRT) were used to measure the static and dynamic standing balance of the patients. Results: In the balance system measurement, the results for the overall index, ant-post index, med-lat index, fall risk index, 5XSST, and FRT after the training differed significantly between the comparison groups (p<0.05). In the evaluation of dynamic balance, the differences in TUG did not differ significantly between the comparison groups after the training (p>0.05). Conclusion: The study found that the asymmetrical group showed significant increases in static and dynamic balance in comparison to the spontaneous group after repetitive sit-to-stand training. Based on this result, it is clear that training in an asymmetrical position with the paretic foot back can increase the left-right stability limit and the anterior-posterior stability limit, thus improving balance control.

• 대한방사선치료학회지
• /
• 제12권1호
• /
• pp.91-104
• /
• 2000

Recently linear accelerator in radiation therapy in asymmetric field has been easily used since the improvement and capability of asymmetrical field adjustment attached to the machine. It has been thought there have been some significant errors in dose calculation when asymmetrical radiation fields have been utilized in practice of radiation treatments if the fundamental data for dose calculation have been measured in symmetrical standard fields. This study investigated how much the measured data of dose distributions and their isodose curves are different between in asymmetrical and symmetrical standard fields, and how much there difference affect the error in dose calculation in conventional method measured in symmetrical standard field. The distributions of radiation dose were measured by photon diode detector in the water phantom (RFA-300P, Scanditronix, Sweden) as tissue equivalent material on utilization of 6 MV linear accelerator with source surface distance (SSD) 1000 mm. The photon diode detector has the velocity of 1 mm per second from water surface to 250 mm depth in the field size of $40mm{\times}40mm\;to\;250mm{\times}250mm\;symmetric\;field\;and\;40mm{\times}20mm\;to\;250mm{\times}125mm$ asymmetrical fields. The measurements of percent depth dose (PDD) and subsequent plotting of their isodose curves were performed from water surface to 250mm dmm from Y-center axis in $100mm{\times}50mm$ field in order to absence the variability of depth dose according to increasing field sizes and their affects to plotted isodose curves. The difference of PDD between symmetric and asymmetric field was maximum $4.1\%\;decrease\;in\;40mm{\times}20mm\;field,\;maximum\;6.6\%\;decrease\;in\;100mm{\times}50mm\;and\;maximum\;10.2\%\;decrease\;200mm{\times}100mm$, the larger decrease difference of PDD as the greater field size and as greater the depth, The difference of PDD between asymmetrical field and equivalent square field showed maximum $2.4\%\;decrease\;in\;60mm{\times}30mm\;field,\;maximum\;4.8\%\;decrease\;in\;150mm{\times}75mm\;and\;maximum\;6.1\%\;decrease\;in\;250mm{\times}125mm$, and the larger decreased differenced PDD as the greater field size and as greater the depth, these differences of PDD were out of $5\%$ of dose calculation as defined by international Commission on radiation unit and Measurements(ICRU). In the dose distribution of asymmetrical field (half beam) the plotted isodose curves were observed to have deviations by decreased PDD as greater as the blocking of the beam moved closer to the central axis, and as the asymmetrical field increased by moving the block 10 mm keeping away from the central axis, the PDD increased and plotted isodose curves were gradually more flattened, due to reduced amount of the primary beam and the fraction of low energy soft radiations by passing thougepth in asymmetrical field by moving independent jaw each 10 h beam flattening filter. As asymmetrical radiation field as half beam radiation technique is used, the radiation dosimetry calculated in utilizing the fundamental data which measured in standard symmetrical field should be converted on bases of nearly measured data in asymmetrical field, measured beam data flies of various asymmetrical field in various energy and be necessary in each institution.

• 한국안광학회지
• /
• 제7권2호
• /
• pp.47-54
• /
• 2002

최근 1년간 안경 처방을 받은 1,100명을 대상으로 단안난시와 양안난시를 분류하고 대칭난시와 비대칭난시에 관해 조사하였다. 대상자 중 난시가 1,365안으로 59.3%이었고, 단안만 난시인 경우가 235명으로 21.4%, 양안이 난시인 경우가 535명으로 48.6% 이었으며 양안난시가 단안난시보다 2.3배 많았다. 양안난시 535명 중 직난시가 61.2%, 도난시 24.7%, 사난시 14.1% 이었고, 난시도는 -0.25~-0.50D가 47.5%, -0.75~-1.00D가 29.9%로 나타났다. 양안난시 535명 중에서 대칭난시는 446명으로 83.4%(1,100명 기준시 40.5%), 비대칭난시는 89명으로 16.6%(1,100명 기준시 8.1%)으로 대칭난사가 5배 많았다. 연령대별 비율을 보면 41~50세에서 45.4%가 대칭난시이었고 14.3%가 비대칭난시로 다른 연령대보다 높게 조사되었다. 대칭난시를 이루는 좌, 우안의 난시형태는 직난시와 직난시가 65.5%, 도난시와 도난시가 25.3%, 사난시와 사난시가 5.6%였고, 비대칭난시를 이루는 좌, 우안의 난시형태는 직난시와 사난시, 사난시와 직난시가 각각 23.6%, 20.2%로 분석되었다. 결론적으로 안경착용자의 대부분이 난시안을 가졌고 단안난시보다는 양안난시가 많았다. 양안난시에서는 대칭난시가 대부분이었으며 40대의 비율이 높았고 남녀간의 차이는 없었다. 대칭난시에서도 좌, 우안이 직난시와 직난시의 형태가 많은 것으로 조사되었다. 이런 자료를 통하여 난시에 대한 이해의 폭을 넓히고, 보다 편안한 안경 처방의 기본자료로 활용될 것으로 본다.

• International journal of advanced smart convergence
• /
• 제4권1호
• /
• pp.114-119
• /
• 2015

The different between two potential voltages can cause the electric field. The electric field is normally distributed along the radius of electrode, and hence it depends on the shape of electrodes. This paper analyses the distribution factor of electric field of symmetrical and asymmetrical concentric electrodes by using Finite Element technique. This allows an analysis the optimum safety clearance distance between two concentric electrodes. The symmetrical concentric electrode refers to Spherical-Spherical concentric electrodes and Cylindrical-Cylindrical concentric electrodes. It must be noted that the symmetrical electrodes are mostly applied for Gas Insulated Substation (GIS) equipments. The asymmetrical electrodes mention to Spherical (inner)-Cylindrical (outer) concentric electrodes and Cylindrical-Cube concentric electrodes, which present as the connection point of High Voltage (HV) cable. The simulations is also complies with the existing standards and regulations in order to ensure the accurate results.

• International Journal of Fluid Machinery and Systems
• /
• 제3권2호
• /
• pp.122-128
• /
• 2010

The attachment of inducer in front of main impeller is a powerful method to improve cavitation performance; however, cavitation surge oscillation with low frequency occurs with blade cavity growing to each throat section of blade passage simultaneously. Then, one conceptual method of installing suction axi-asymmetrical plate has been proposed so as to keep every throat passage away from being unstable at once, and the effect on suppression of the oscillation were investigated. In the present study, cavitation behaviors in the inducer is observed with distributing multi-cameras circumferentially, recording simultaneously and reconstructing multi-photos on one plane field as moving a linear cascade. Observed results are utilized for discussion with other measuring results as casing wall pressure distribution. Then the suppression mechanism of oscillation by installing axi-asymmetrical inlet plate will be clarified in more details.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1524-1532
• /
• 2015

Conventional space vector pulse width modulation based asymmetrical dual inverter configuration produces high common mode voltage (CMV) variations. This CMV causes the flow of common mode current, which adversely affects the motor bearings and electromagnetic interference of nearby electronic systems. In this study, a simple and generalized carrier based pulse width modulation (PWM) technique is proposed for dual inverter configuration. This simple approach generates various continuous and discontinuous modulating signals based PWM algorithms. With the application of the discontinuous modulating signal based PWM algorithm to the asymmetrical dual inverter configuration, the CMV can be reduced with a slightly improved quality of output voltage. The performance of the continuous and discontinuous modulating signals based PWM algorithms is explored through both theoretical and experimental studies. Results show that the discontinuous modulating signal based PWM algorithm efficiently reduces the CMV and switching losses.

• 한국통신학회논문지
• /
• 제29권1A호
• /
• pp.77-83
• /
• 2004

초고주파 회로에서 광범위하게 이용되는 평행 결합 마이크로스트립 대역통과필터는 좁은 대역폭 과 2차 스프리어스 통과대역으로 필터의 응용을 제한한다. 이와 같은 문제를 해결하기 위해서 복합 유전체기판상에 비대칭 결합 마이크로스트립 선로를 이용하는 방법을 제시하였다. closed-form해석방법을 이용하여 복합 유전체기판상에 비대칭 결합 마이크로스트립 선로를 해석하고 중심주파수 9GHz 에서 정규화 대역폭 $33\%$을 갖는 필터를 제작하였다. 단층기판을 갖는 필터와 비교하면 복합 유전체기판을 이용한 필터는 스프리어스 통과대역이 약 20dB 이상 개선됨을 보였다

• The Journal of Korean Physical Therapy
• /
• 제5권1호
• /
• pp.17-24
• /
• 1993

The purpose of this study was to find out what changes in weight bearing in the both upper extremities occurred in response to Asymmetrical Tonic Neck Reflex by rotation of head in the quadruped position. The subjects for the study were 80 children (44 male, 44 female) who were neurologically normal. They were divided into two groups $6\~7$ year olds and $8\~9$ year olds. Paired t-test was applied as a atatistical method at the 0.01 level of significance. The results of this study are as follows; 1. In the neutral position of head, there was mort weight bearing on the left hand than the right in both of the two groups(p<0.01). 2. When the head was rotated to the right or left passively, there was more weight bearing on the hand of side to which the face was rotated(p<0.01). 3. When the head was rotated to the right or left actively, there us also more weight bearing on the hand of side to which the face was rotated(p<0.01). Therefore, it is possible to un Asymmetrical Tonic Neck Reflex to increase body weight for muscle strengthening in children with weakened muscles of the upper extremities. further studies are required for confirmation of these findings.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.592-603
• /
• 2015

In this paper, an optical implementation of a novel asymmetrical cryptosystem combined with D-H secret key sharing and triple DES is proposed. The proposed optical cryptosystem is realized by performing free-space interconnected optical logic operations such as AND, OR and XOR which are implemented in Mach-Zehnder type interferometer architecture. The advantage of the proposed optical architecture provides dual outputs simultaneously, and the encryption optical setup can be used as decryption optical setup only by changing the inputs of SLMs. The proposed cryptosystem can provide higher security strength than the conventional electronic algorithm, because the proposed method uses 2-D array data, which can increase the key length surprisingly and uses 3DES algorithm, which protects against “meet in the middle” attacks. Another advantage of the proposed asymmetrical cryptosystem is that it is free to change the user’s two private random numbers in generating the public keys at any time. Numerical simulation and performance analysis verify that the proposed asymmetric cryptosystem is effective and robust against attacks for the asymmetrical cipher system.