• 제목/요약/키워드: asymmetric geometry

검색결과 60건 처리시간 0.027초

개선된 3차원 오디오 재생을 위한 크로스토크 제거 기법 (A Cross-talk Cancelling Technique for Improved 3-Dimensional Audio Reproduction)

  • 오승수;김기만
    • 한국정보통신학회논문지
    • /
    • 제5권1호
    • /
    • pp.8-13
    • /
    • 2001
  • 일반적으로 라우드 스피커를 이용한 3차원 오디오에서의 크로스토크 제거는 "sweet spot" 이라 부르는 청취자의 위치에 따라 성능이 크게 의존하는 것으로 알려져 있다. 따라서 머리의 움직임, 잔향, 머리모양의 차이 같은 혼란을 주는 요소에 강한 새로운 크로스토크 제거기가 제안되었는데 이는 스피커의 대칭 구조와 비대칭 구조를 합성하여 3개의 라우드 스피커가 필요한 구조로 되어있다. 본 논문은 3개의 스피커가 필요한 기존의 크로스토크 제거기 구조를 2개의 스피커만 사용하여 동등한 성능을 구현할 수 있도록 하였다. 연구된 방법은 청취 실험을 통해 성능을 검증하였다.성능을 검증하였다.

  • PDF

송풍기용 고속 2상 6/5 SRM의 설계 및 특성해석 (Design and Characteristics of High Speed 2-Phase 6/5 Switched Reluctance Motor for Air-blower Application)

  • 팜쭝히웨;이동희;안진우
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2015년도 제46회 하계학술대회
    • /
    • pp.673-675
    • /
    • 2015
  • This paper presents a design of a high speed 2-phase 6/5 switched reluctance motor (SRM) for an air-blower application. This type of motor is suitable for the applications that require high speed and only one directional rotation as air-blower. The desired air-blower is unidirectional application, and requires a wide positive torque region without torque dead-zone. In order to get a wide positive torque region without torque dead-zone during phase commutation, asymmetric inductance characteristic with non-uniform air-gap is considered. The proposed motor can be operated at any rotor position. The proposed 6/5 SRM uses short flux path technique that achieved by means of winding configuration and lamination geometry. The purpose of short flux path is to reduce the core loss and the absorption MMF in the stator. The proposed 2-phase 6/5 SRM is verified by finite element method (FEM) analysis and Matlab-Simulink. In order to verify the design, a prototype of the proposed motor was manufactured for practical system.

  • PDF

Reflection Seismology in the Southern Ayu Trough, a Slow-spreading Divergent Boundary

  • Hong, Jong-Kuk;Lee, Sang-Mook
    • Ocean and Polar Research
    • /
    • 제24권3호
    • /
    • pp.189-196
    • /
    • 2002
  • A multichannel seismic survey was conducted in the southern Ayu Trough which is the only spreading boundary between the Philippine Sea and Caroline plates. The seismic system used in this study comprises of 2.46-l sleeve gun and a 12-channel streamer with a group interval of 6.25m. Migration technique was used to analyze seismic velocity, and poststack depth migration was applied to the stacked data. The sediment thickness obtained from the depth section tends to increase with distance from the spreading axis. Sedimentation rates are poorly constrainted in the study area. The apparent half-spreading rates estimated from the sediment thickness and sedimentation rate from DSDP hole on the caroline plate are 4.7mm/yr and 7.9mm/yr at $1^{\circ}24'N\;and\;0^{\circ}42'N$, respectively, which are fester than Previously suggested. On the basis of new oblique spreading geometry, the recalculated spreading rates are 5.4mm/yr and 9.1mm/yr at $1^{\circ}24'N\;and\;0^{\circ}42'N$, respectively. Seismic sections show that the topography is asymmetric across the Ayu Trough and the acoustic basement is rough. These features are consistent with the earlier suggestion that the Ayu Trough is a slow-spreading divergent boundary. A detailed examination of seismic profiles away from the axis shows that sediments can be divided into two layers which implies a possible change in the spreading rate anuor sedimentation condition during the formation of the trough.

한국어 자음에서 변별 자질들의 지각적 위계 (The Perceptual Hierarchy of Distinctive Features in Korean Consonants)

  • 배문정
    • 말소리와 음성과학
    • /
    • 제2권4호
    • /
    • pp.109-118
    • /
    • 2010
  • Using a speeded classification task (Garner, 1978), we investigated the perceptual interaction of distinctive features in Korean consonants. The main questions of this study were whether listeners can perceptually identify the component features that make up complex consonant sounds, whether these features are processed independently or dependently and whether there is a systematic hierarchy in their dependency. Participants were asked to classify syllables based on their difference in distinctive features in the task. Reaction times for this task were also gathered. For example, participants classified spoken syllables /ta/ and /pa/ as one category and /$t^ha$/ and /$p^ha$/ as another in terms of aspiration condition. In terms of articulation, participants classified /ta/ and /$t^ha$/ as one category and /pa/ and /$p^ha$/ as another. We assumed that the difference between their RTs represents their interdependency. We compared the laryngeal features and place features (Experiment 1), resonance features and place features (Experiment 2), and manner features and laryngeal features (Experiment 3). The results showed that distinctive features were not perceived in a completely independent way, but they had an asymmetric and hierarchical interdependency. The laryngeal features were found to be more independent compared to place and manner features. We discuss these results in the context of perceptual basis in phonology.

  • PDF

A new method for determining the effective length factor of columns in partially braced frames on elastic supports

  • Adel Slimani;Toufik Belaid;Messaoud Saidani;Fatiha Ammari;Redouane Adman
    • Structural Engineering and Mechanics
    • /
    • 제85권6호
    • /
    • pp.825-835
    • /
    • 2023
  • The effective buckling length factor is an important parameter in the elastic buckling analysis of steel structures. The present article aims at developing a new method that allows the determination of the buckling factor values for frames. The novelty of the method is that it considers the interaction between the bracing and the elastic supports for asymmetrical frames in particular. The approach consists in isolating a critical column within the frame and evaluating the rotational and translational stiffness of its restraints to obtain the critical buckling load. This can be achieved by introducing, through a dimensionless parameter 𝜙i, the effects of coupling between the axial loading and bending stiffness of the columns, on the classical stability functions. Subsequently, comparative, and parametric studies conducted on several frames are presented for assessing the influence of geometry, loading, bracing, and support conditions of the frame columns on the value of the effective buckling length factor K. The results show that the formulas recommended by different approaches can give rather inaccurate values of K, especially in the case of asymmetric frames. The expressions used refer solely to local stiffness distributions, and not to the overall behavior of the structure.

컴퓨터 의한 Fletcher-Suit Colpostat 주변의 Cs-137의 선량분포에 관한 연구 (A Study on Dose Distribution around Fletcher-Suit Colpostat Containing Cs-137 Source by a Computer)

  • 강위생
    • Radiation Oncology Journal
    • /
    • 제7권2호
    • /
    • pp.305-311
    • /
    • 1989
  • fletcher-Sult 콜포스타트는 방광과 직장의 선량을 줄이기 위해 내부에 차폐물을 포함하고 있다. Cs-137튜브가 내장된 콜포스타트 주변의 물에서 임의점의 선량을 계산한 후 내부 구조에 의한 차폐효과를 구하고, 등선량곡선과 등차폐율 곡선을 그리기 위한 프로그램을 개발하였다. EGA카드를 가진 IBM호환기종 AT 컴퓨터로 MS-Basic V6.0을 이용하여 프로그램을 만들었다. 선량 계간용 알고리듬에 내부구조, 튜브, 콜포스타트의 물질, 형태 및 위치까지 고려되었다. 한 프로그램에 의해 계산된 물에서의 단위 mg. Ra eq당 선량율을 보조기억장치에 저장해 두고, 다른 프로그램에서 필요할 때 불러 쓰도록 하였다. 콜포스타트의 내측 선량이 감소되었으며, 상하의 선량분포가 대칭이 아님을 볼 수 있었다. 선량의 감소는 하부에 비해서 상부에서 더 현저하였으며, 차폐효과도 하부에 비해 상부에서 더 높았으며 내측 거의 전 영역에 차폐효과가 있었다. =1와같은 결과는 콜포스타트 내부에서 튜브가 한쪽으로 이동되어 있고, 튜브내에 선원의 위치가 비대칭인 점과 관련이 있었다. 최대 차폐율은 콜포스타트 상부에서 $49\%$ 하부에서 $44\%$였으며, 등차폐율 곡선은 대체로 선원을 중심으로 하여 방사상이었다. 치료계획에서 방광 및 직장등의 정확한 선량을 구하기 위해서는 콜포스타트 내부구조에 의한 차폐 효과가 고려되어야 할 것이다.

  • PDF

3 차원 프린팅으로 제작된 개인맞춤형 안경테의 유한요소해석 (Finite Element Analysis of a Customized Eyeglass Frame Fabricated by 3D Printing)

  • 이지은;임영은;박근
    • 대한기계학회논문집A
    • /
    • 제40권1호
    • /
    • pp.65-71
    • /
    • 2016
  • 최근 개방형 소스 기반의 저가 3 차원 프린터의 출현에 의해 3 차원 프린팅에 대한 관심이 고조되고 있다. 3 차원 프린팅은 기존 제조업의 진입장벽을 낮추고 유연성을 높일 것으로 기대되며, 저비용으로 개인맞춤형 제품의 제작이 가능한 장점이 있다. 본 연구에서는 뱀 모양을 형상화한 비대칭 형상의 독특한 안경테를 설계하였고, 사용자의 안면 특성을 반영하여 개인맞춤형으로 설계하였다. 또한 3 차원 프린팅으로 제작된 안경테의 구조적 안전성을 평가하기 위해 유한요소해석을 수행하였으며, 이때 적층방향별 인장시험을 통해 확보한 직교이방성 물성을 반영하였다. 해석을 통해 가장 안전성이 높게 평가된 적층 방향으로 프린팅을 수행하였고, 제작된 안경테는 조립과정에서 파손 없이 조립됨을 확인하였다.

한국어 단음절에서 자음과 모음 자질의 비선형적 지각 (Nonlinear Interaction between Consonant and Vowel Features in Korean Syllable Perception)

  • 배문정
    • 말소리와 음성과학
    • /
    • 제1권4호
    • /
    • pp.29-38
    • /
    • 2009
  • This study investigated the interaction between consonants and vowels in Korean syllable perception using a speeded classification task (Garner, 1978). Experiment 1 examined whether listeners analytically perceive the component phonemes in CV monosyllables when classification is based on the component phonemes (a consonant or a vowel) and observed a significant redundancy gain and a Garner interference effect. These results imply that the perception of the component phonemes in a CV syllable is not linear. Experiment 2 examined the further relation between consonants and vowels at a subphonemic level comparing classification times based on glottal features (aspiration and lax), on place of articulation features (labial and coronal), and on vowel features (front and back). Across all feature classifications, there were significant but asymmetric interference effects. Glottal feature.based classification showed the least amount of interference effect, while vowel feature.based classification showed moderate interference, and place of articulation feature-based classification showed the most interference. These results show that glottal features are more independent to vowels, but place features are more dependent to vowels in syllable perception. To examine the three-way interaction among glottal, place of articulation, and vowel features, Experiment 3 featured a modified Garner task. The outcome of this experiment indicated that glottal consonant features are independent to both the place of articulation and vowel features, but the place of articulation features are dependent to glottal and vowel features. These results were interpreted to show that speech perception is not abstract and discrete, but nonlinear, and that the perception of features corresponds to the hierarchical organization of articulatory features which is suggested in nonlinear phonology (Clements, 1991; Browman and Goldstein, 1989).

  • PDF

FSI 기법을 적용한 인체 회전 시 협착 혈관에서의 혈류 특성 (Study of Blood Characteristics in Stenosed Artery under Human Body Rotation by Using FSI Method)

  • 조성욱;김승욱;노경철;유홍선
    • 대한기계학회논문집B
    • /
    • 제37권5호
    • /
    • pp.449-457
    • /
    • 2013
  • 본 논문에서는 FSI(Fluid-Structure Interaction)기법을 이용하여 인체 회전의 영향을 고려한 혈류와 혈관벽의 거동을 이해하기 위한 수치해석을 수행하였다. 혈관은 협착률이 50%이고 편심이 없는 형상이며 인체 회전 효과를 묘사하기 위하여 혈관 주축에 대해 2 ~ 6 rps 의 회전을 가하였다. 협착과 축 회전의 영향으로 나선형, 비대칭 유동이 강체와 FSI 모델에서 모두 나타났다. 그러나 FSI 모델에서 혈관벽 움직임의 영향으로 혈류의 주기적, 과도적 차이가 발생했다. 특히 혈관 내 경화반의 진전과 경화반 위험성을 나타내는 대표적인 인자로 알려진 유동 재순환 영역이 감소하였다. 혈관벽의 움직임은 협착과 회전효과와 마찬가지로 유동 재순환 영역의 생성에 영향을 미친다.

Increase In Mean Alveolar Pressure Due To Asymmetric Airway Geometry During High Frequency Ventilation

  • Cha, Eun-J.;Lee, Tae-S.;Goo, Yong-S.;Song, Young-J.
    • 대한의용생체공학회:의공학회지
    • /
    • 제14권1호
    • /
    • pp.89-96
    • /
    • 1993
  • During high frequency ventilation (HFV), mean alveolar pressure has been measured to increase with mean airway opening pressure controlled at a constant level in both humans and experimental animals. Since this phenomenon could potentiate barotrauma limiting advantages of HFV, the present study theoretically predicted the difference between menu alveolar and airway opening pressures ($MP_{alv}$). In a Weibel's trumpet airway model, approximated formula for $MP_{alv}$ was derived based on momentum conservation assuming a uniform velocity profile. The prediction, equation was a func pion of gas density($\rho$), mean flow rate(Q), and diameter of the airway opening where the pressure measurement was made($D_0$) : $MP_{alv}=4{\rho}(Q/D_0^{2})^2$. This was a result of the difference in crosssectional area between the alveoli and the airway opening. A simple aireway model experiment was performed and the results well fitted to the prediction, which demonstrated the validity of the present analysis. Previously reported $MP_{alv}$ data from anesthetized dogs in supine position were comparable to the predicted values, indicating that the observed dissociation between mean alveolar and airway opening pressures during HFV can be explained by this innate geometric (or cross-sectional area) asymmetry of the airways. In lateral position, however, the prediction substantially underestimated the measurements suggesting involvement of other important physiological mechanisms.

  • PDF