• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.48.1-48.1
• /
• 2019

We found a diffuse Hα feature with a large size of ~2' around a Herbig star, MWC 1080. It shows a strong correlation with the elongated outflow cavity centered on the star. To investigate the diffuse Hα source and the molecular cavity in detail, we carried out the high-resolution NIR spectroscopy using IGRINS. We detected six hydrogen Brackett line series, seven H2 lines, and an [Fe II] forbidden line. With the obtained spatial, kinematic, and line ratio results, we discuss the characteristics of the central MWC 1080A, the NE outflow cavity, and the SE molecular cloud regions separately. Most of the bright Brγ sources around MWC 1080A were found to be reflection nebulae, but a point-like Brγ source close to another young star, MWC 1080E, was identified as a distinct source due to MWC 1080E itself. The narrow components of the H2 lines observed around MWC 1080A were found to trace PDRs located on the wall of the main outflow cavity. Based on the shock-excited H2 and [Fe II] lines detected just inside a bow-shock shape Hα feature, we suggest that it represents the actual shock at the head of the NE outflow from MWC 1080A. Also, we newly detected the shock-excited H2 and [Fe II] lines with highly blueshifted velocities in the SE molecular cloud region. They could be related to unrevealed outflows from other young stars existing around MWC 1080A.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.50.4-51
• /
• 2020

We report our discovery of Raman-scattered He II λ6545 feature in young planetary nebulae NGC 6886 and NGC 6881 which indicates the existence of atomic hydrogen components. Considering sharply increasing cross-section of hydrogen atom near the resonance, Raman-scattered He II features are a useful diagnostic tool to investigate the distribution and kinematics of H I region in planetary nebulae. The high-resolution spectroscopic observation was carried out using BOES installed on the 1.8 m telescope of BOAO. We estimate the column density of H I region and its expansion velocity using our grid-based Monte-Carlo radiative transfer code. We assume that the H I region is uniformly distributed in spherical shell geometry with an opening angle and expands with constant speed. Our best-fit model is shown with the column density NHI = 3 × 1020 cm-2 and expansion speed vexp = 25 km s-1 with the opening angle ~ 25° for NGC 6886, and NHI = 4 × 1020 cm-2 and vexp = 30 km s-1 with the opening angle ~ 35° for NGC 6881. We present brief discussions on the late-stage of evolution of stars with mass > 3 M⊙.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.85.2-85.2
• /
• 2017

The coronal electron density is a fundamental and important physical quantity in solar physics for estimating coronal magnetic fields and analyzing solar radio bursts. To check a validation of coronal electron density distributions (CEDDs) from polarized brightness (pB) measurements with Van de Hulst inversions, we compare CEDDs derived from a polarized brightness (pB) observation [MLSO/MK4 coronameter] and one spectroscopic observation [SOHO/UVCS]. For this, we consider data observed in 2005 with the following conditions: (1) the observation time differences from each other are less than 1 minutes; and (2) O VI doublet (O VI $1031.9{\AA}$ and $1037.6{\AA}$) is well identified. In the pB observation, the CEDDs can be estimated by using Van de Hulst inversion methods. In the spectroscopic observation, we use the ratio of radiative and collisional components of the O VI doublet to estimate the CEDDs. We find that the CEDDs obtained from pB measurements are higher than those based on UVCS observations at the heights between 1.6 and 1.8 Rs (${\times}1.9$ for coronal streamer, 1.2 ~ 1.8 for background corona, and 1.5 for coronal hole), while they are lower than those based on UVCS at the heights between 1.9 and 2.6 Rs (${\times}0.1{\sim}0.6$ for coronal streamer, 0.5 ~ 0.7 for background corona, and 0.6 for coronal hole). The CEDDs of coronal streamers are higher than those of background corona at the between 1.6 and 2.0 Rs: ${\times}1.2{\sim}2.4$ for MK4 and 1.5 ~ 1.9 for UVCS.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.39.2-39.2
• /
• 2017

Over the last decade, deep studies of nearby galaxies have led to the discovery of vast stellar envelopes that are often rich in substructure. These components are naturally predicted in models of hierarchical galaxy assembly, and their observed properties place important constraints on the amount, nature, and history of satellite accretion. One of the most effective ways of mapping the peripheral regions of galaxies is through resolved star studies. Using wide-field cameras equipped to 8 m class telescopes, it has recently become possible to extend these studies to systems beyond the Local Group. Located at a distance of 3.6 Mpc, M81 is a prime target for wide-field mapping of its resolved stellar content. In this talk, we present the detailed results from our deep wide-field imaging survey of the M81 group with the Hyper Suprime-Cam (HSC), on the Subaru Telescope. We report on the analysis of the structures, stellar populations, and metallicities of old dwarf galaxies such as NGC3077, IKN, KDG061, as well as young stellar systems such as Arp's Loop and Holmberg IX. Several candidates for yet-undiscovered faint dwarf galaxies and young stellar clumps in the M81 group will also be introduced. The peculiar galaxy NGC3077 has been classified as the irregular galaxy. Okamoto et al. (2015, ApJ 809, L1) discovered an extended halo structure with S-shape elongated tails, obvious feature of tidal interaction. With a help of numerical simulation by Penarrubia et al. (2009, ApJ 698, 222), we will demonstrate that this tidal feature was formed during the latest close encounters between M81, M82, and NGC 3077, which induced star formation in tidally stripped gas far from the main bodies of galaxies. It is not clear whether the latest tidal interaction was the first close encounters of three galaxies. If NGC3077 is still surrounded by the dark matter halo, it implies that NGC3077 has undergone the first tidal stripping by larger companions. Kinematic studies of inter galactic globular clusters and planetary nebulae would tell us the past history of tidal interaction in this group of galaxies.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.141.1-141.1
• /
• 2011

New CCD BVR light curves of BD And are presented. Our light curves with nearly equal depths for both primary and secondary eclipses show well-defined photometric waves outside eclipse for all of BVR bandpasses. The orbital period is greatly revised as $0.^d92580519$ which is twice longer than that known previously. Sixteen timings from our observations and thirteen ones from the SuperWASP measurements were calculated. All available timings over 76 years, including ours, were analyzed to figure out the dynamical behavior of the system. It was found that the recent CCD O-C residuals varied in a cyclical way with a period of $9.^y18$ and a semi-amplitude of $0.^d0046$. The secondary period of $9.^y18$ is the most shortest one among those which have been ever found in the short period RS CVn binary stars. The periodic variation most likely arises from the light-travel time effect due to a low-mass ($m_3{\sim}0.88\;M_{\odot}$) tertiary companion moving in an orbit with an large eccentricity ($e_3$=0.70) and a low inclination ($i_3{\sim}28^{\circ}$). The Applegate mechanism could not operate properly in both components because the model parameters require too much large luminosity changes of ${\Delta}L/L_{p,s}$ > 10. The new light curves were synthesized using the 2003 version of Wilson-Divinney code. It was found useful to model two huge spots on the surface of the hotter star and a third-light in order to minimize the residuals from the observations. Astronomical basic parameters were deduced from our photometric solution.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.175-178
• /
• 2015

Due to the lack of an accretion disk in a polar (magnetic cataclysmic variable, MCV), the material transferred from the secondary is directly accreted onto the white dwarf, forming an accretion stream and a hot spot on the white-dwarf component. During the eclipses, different light components can be isolated. Therefore, the monitoring of eclipsing polars could provide valuable information on several modern astrophysical problems, e.g., CVs as planetary hosting stars, mass transfer and mass accretion in CVs, and the magnetic activity of the most rapidly rotating cool dwarfs. In the past five years, we have monitored about 10 eclipsing polars (e.g., DP Leo and HU Aqr) using several 2-m class telescopes and about 100 eclipse profiles were obtained. In this paper, we will introduce the progress of our research group at YNOs. The first direct evidence of variable mass transfer in a CV is obtained and we show that it is the dark-spot activity that causes the mass transfer in CVs. Magnetic activity cycles of the cool secondary were detected and we show that the variable mass transfer is not caused by magnetic activity cycles. These results will shed light on the structure and evolution of close binary stars (e.g., CVs and Algols).

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.57-57
• /
• 2010

We report the discovery of a bright mid-infrared (MIR) source with prominent crystalline silicate emission using the space telescope AKARI and Spitzer. This source, IRAS 15099-5856, has a spectacular morphology with a bright central compact source (CCS) surrounded by knots, spurs, and several extended (~4') arc-like filaments. The source is seen only in infrared at ${\geq}10{\mu}m$. The Spitzer MIR spectrum of the CCS shows prominent emission features from Mg-rich crystalline silicates and strong [Ne II] 12.88 ${\mu}m$ and several other faint ionic lines. We model the MIR spectrum as thermal emission from several independent dust components and compare their properties to those of the Herbig Be star HD 100546 which shows very similar MIR spectrum. Our molecular line observations reveal two molecular clouds around the source, but no associated dense molecular cores. We discuss two possible origins for IRAS 15099-5856; a deeply embedded massive young stellar object on the other side of the Galaxy and a disrupted, protoplanetary disk being photoevaporated by the UV radiation from the nearby O star Muzzio 10.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.645-647
• /
• 2015

We have initiated a Very Long Baseline Interferometer (VLBI) monitoring project of 36 methanol maser sources at 6.7 GHz using the Japanese VLBI Network (JVN) and East-Asian VLBI Network (EAVN), starting in August 2010. The purpose of this project is to systematically reveal 3-dimensional (3-D) kine-matics of rotating disks around forming high-mass protostars. As an initial result, we present proper mo- tion detections for two methanol maser sources showing an elliptical spatial morphology, G 002.53+00.19 and G 006.79-00.25, which could be the best candidates associated with the disk. The detected proper motions indicate a simple rotation in G 002.53+00.19 and rotation with expansion in G 006.79-00.25, respectively, on the basis of disk model fits with rotating and expanding components. The expanding motions might be caused by the magnetic-centrifugal wind on the disk.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.8
• /
• pp.21-28
• /
• 2008

Fizeau interferometer is used for inspecting the lens surface profile accurately. This study is focused on the design and optical measuring techniques for large optical components, such as a reflection mirror for large area lithography or astronomical purpose. A tower type Fizeau interferometer is designed and set up in horizontally with a 45$^{\circ}$ fold mirror which makes easy to align the optical path of heavy interferometer system. To align the optical path, a five-axes stage for the interferometer is required. This study shows a method of the 45$^{\circ}$ fold mirror alignment by using a three-axis stage instead of adjusting the interferometer itself or measuring object. This system will be installed on the large optics polishing machine during the manufacturing process as an on-machine inspection system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.12 s.255
• /
• pp.1649-1657
• /
• 2006

Fizeau interferometer is well known optical instrument for measuring the lens profile accurately. The object of this study is focused on the design and optical measuring techniques for large optical components, such as a reflection mirror for astronomical purpose. Measuring of large optical lens, the object could not be moved as small one but the measuring instrument must be moved for the alignment, because of the geometric conditions and the accuracy of the stage. Therefore, a five axis stage is designed to align the Interferometer instead of the measuring object. This instrument will be used for an on machine measuring system in polishing machine for large optical lens.