• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.763-774
• /
• 2014

A simple and efficient vibration analysis procedure for stiffened panels with openings and arbitrary boundary conditions based on the assumed mode method is presented. Natural frequencies and modes are determined by solving an eigenvalue problem of a multi-degree-of-freedom system matrix equation derived by using Lagrange's equations of motion, where Mindlin theory is applied for plate and Timoshenko beam theory for stiffeners. The effect of stiffeners on vibration response is taken into account by adding their strain and kinetic energies to the corresponding plate energies whereas the strain and kinetic energies of openings are subtracted from the plate energies. Different stiffened panels with various opening shapes and dispositions for several combinations of boundary conditions are analyzed and the results show good agreement with those obtained by the finite element analysis. Hence, the proposed procedure is especially appropriate for use in the preliminary design stage of stiffened panels with openings.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.221-226
• /
• 2005

In this paper, a dynamic model for the rotor shaft-coupling-blade system is developed. The blades are attached to a disk and driven by an electric motor shaft which is flexible in torsion. We assumed that the shaft torsional flexibility is lumped in the flexible coupling which is usually adopted in rotor systems. The Lagrangian approach with the small deformation theory for both blade-bending and shaft-torsional deformations is employed for developing the equation of the motion. The assumed modes method is used for estimating the blade transverse deflection. The numerical results highlight the effects of both structural damping of the system and the torsional stiffness of the flexible coupling to the dynamic response of the blade. The results showed strong coupling between the blade bending and shaft torsional vibrations in the form of inertial nonlinearif, stiffness hardening and softening.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.318-322
• /
• 1996

This paper presents a technique to control a robot which has a flexible manipulator moving in a vertical plane. The flexible manipulator is modeled as an Euler-Bernoulli beam. Elastic deformation is represented using the assumed modes method. A comparison function which satisfies all geometric and natural boundary conditions of a cantilever beam with an end mass is used as an assumed mode shape. Lagrange's equation is utilized for the development of a discretized model. A control algorithm is developed using a simple PID control technique. The proportional, integral and derivative control gains are determined based on the dominant pole placement method and tuned to show no overshoot and having a short settling time. The effectiveness of the developed control scheme is showed experimentally. In the position control experiment, three different end masses are used. The experimental results shows little overshoot, no steady state error, and less than 2.5 second settling time in case of having an end mass which is equivalent to 45% of the total system weight. Also the residual vibration of the end point is effectively controlled.

• 한국소음진동공학회논문집
• /
• 제15권9호
• /
• pp.1023-1029
• /
• 2005

In this paper, a dynamic model for the rotor shaft-coupling-blade system was developed. The blades are attached to a disk and driven by an electric motor shaft which is flexible in torsion. We assumed that the shaft torsional flexibility was lumped in the flexible coupling which is usually adopted in rotor systems. The Lagrangian approach with the small deformation theory for both blade-bending and shaft-torsional deformations was employed for developing the equation of the motion. The Assumed Modes Method was used for estimating the blade transverse deflection. The numerical results highlight the effects of both structural damping of the system and the torsional stiffness of the flexible coupling to the dynamic response of the blade. The results showed strong coupling between the blade bending and shaft torsional vibrations in the form of inertial nonlinearity, stiffness hardening and softening.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권3호
• /
• pp.478-491
• /
• 2013

Natural vibration analysis of plates with openings of different shape represents an important issue in naval architecture and ocean engineering applications. In this paper, a procedure for vibration analysis of plates with openings and arbitrary edge constraints is presented. It is based on the assumed mode method, where natural frequencies and modes are determined by solving an eigenvalue problem of a multi-degree-of-freedom system matrix equation derived by using Lagrange's equations of motion. The presented solution represents an extension of a procedure for natural vibration analysis of rectangular plates without openings, which has been recently presented in the literature. The effect of an opening is taken into account in an intuitive way, i.e. by subtracting its energy from the total plate energy without opening. Illustrative numerical examples include dynamic analysis of rectangular plates with rectangular, elliptic, circular as well as oval openings with various plate thicknesses and different combinations of boundary conditions. The results are compared with those obtained by the finite element method (FEM) as well as those available in the relevant literature, and very good agreement is achieved.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.547-551
• /
• 1996

In this paper, robust vibration control of a one-link flexible robot arm based on variable structure system is discussed. We derive dynamic equations of it using a Lagrangian assumed modes method based on Bernoulli-Euler Beam theory. The optimal sliding surface is designed and the problem of chattering is also solved by the adoption of a continuous control law within a small neighborhood of the switching hyperplane.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.93-98
• /
• 2000

The objective of this study is to investigate the results of researches which have been conducted throughout the world and in Korea concerning the behavior modes of masonry infill panels and frames. The influence of masonry infill panels on the seismic behavior of RC frames must be considered in the design and evaluation procedure though current code provisions do not generally require explicitly this consideration. However, since the level of the earthquake intensity in Korea is assumed to be moderate, the masonry infill panels may cause the different effect to the structure from those in high seismicity region and this difference should be studied in depth in the future.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.703-706
• /
• 1999

In this paper, robust vibration control of a one-link flexible robot arm based on variable structure system is discussed. We derive dynamic equations of it using a Lagragian assumed modes method based on Bernoulli-Euler beam theory. The optimal sliding surface is designed and the problem of chattering is also solved by the adoptation of a continuous control law within a small neighborhood of the switching hyperplane.

• 한국전산구조공학회논문집
• /
• 제31권3호
• /
• pp.127-132
• /
• 2018

본 논문에서는 기능경사재료 보 고유벡터의 변화도 산정을 위한 해석 정식화를 섭동법에 기초하여 제시한다. 불확실인수로는 기능경사재료 보의 중앙면에서 보의 축을 따르는 방향으로 공간적 불확실성을 가지는 재료탄성계수를 택하였다. 두께 방향으로의 탄성계수 변화는 원래의 지수함수를 따르는 것으로 가정하였다. 정식화에서는 고유벡터에 대한 선형 Taylor전개를 적용한다. 수치예제로는 보의 중앙면에 대하여 대칭인 탄성계수를 가지는 단순지지 보를 택하였다. 몬테카를로 해석을 함께 수행하여 제안한 정식화가 합리적인 결과를 주는지 확인하였다. 해석을 통하여 몬테카를로 해석과 제안된 방법에 의한 결과가 고유모드의 평균 및 표준편차에서 거의 동일한 결과를 제시함을 볼 수 있었다. 제안된 방법을 통하여 고유모드의 표준편차 형상을 쉽게 산정할 수 있다. 고유모드의 평균중심 변화량은 고유모드의 차수에 관계없이 그 고유모드 대비 한 개가 더 많은 경사 0인 점을 가지게 된다. 또한 평균 고유모드형상으로부터의 변화량은 저차 모드보다 고차모드에서 더 크게 나타남을 알 수 있었다.

• 한국항행학회논문지
• /
• 제4권2호
• /
• pp.103-113
• /
• 2000

유연체 부착물을 갖는 인공위성의 수학적 모델링에 관한 방법은 몇 가지들이 있다. 본 논문에서는 FEM에 비해 차수가 낮아 계산시간을 줄일 수 있는 근사화 방법중 하나인 추측모드법을 사용한 하이브리드 라그랑지 방정식을 유도하였다. 이것들은 각속도에 관한 세개의 식들과 유연변위에 관한 두개의 식들로 이루어지며, 위성 본체와 태양전지판의 상호작용을 표현한다. 자세제어에 있어서, 제어법칙은 제어입력뿐만 아니라 진동억제를 포함한 성능지수를 최소화하도록 설계하였다. 이 목적을 위해 본 논문은 LQG와 LQG/LTR 제어기를 사용하였고, 결과로는 진동억제를 고려한 소각선회 성능을 보여준다. 특히, 본 논문에서는 특이시스템을 특이값 분리에 의한 비특이시스템 가정법을 통한 LQG/LTR 설계를 보여준다.