• The Korean Journal of Quaternary Research
• /
• v.20 no.2
• /
• pp.51-57
• /
• 2006

Terrace stratigraphy of the southeastern coastal areas of Korea is reappraised on the basis of terrace mapping and geochronology. Coastal terraces are divided into uHT ($90{\sim}130\;m$), HT ($63{\sim}86m$), MT ($36{\sim}55\;m$), and LT ($8{\sim}25\;m$) according to altitude. Among these, the Lower Terrace I is interpreted to have formed during MIS 5e based on Tephras Aso-4 (MIS 5c), Ata(MIS 5d or 5e) and OSL data. The age of Lower Terrace II is thought to be MIS 5a based on tephras and OSL data. The uplift rate in the SE part of Korea during the formation of the Lower Terrace (i.e. the MIS 5) ranges from 0.08 to 0.25 mm/yr and averages as 0.15 mm/yr. Such value is quite small in comparison to that of Japan, Taiwan or many other tectonically active areas in the world.

• IMMUNE NETWORK
• /
• v.7 no.3
• /
• pp.149-157
• /
• 2007

Background: The microsatellites within human leukocyte antigen (HLA) region show considerable polymorphism and strong linkage disequilibrium (LD) with HLA alleles. These microsatellites have been used for genetic analysis including disease mapping to understand susceptibility to autoimmune and infectious diseases. Also, use of microsatellites has recently been proposed as an approach for identifying non-HLA markers within the HLA region that could function as transplantation determinants and for the selection of potential donors for transplantation. Methods: To analyse the frequency of five microsatellites in the Korean population, genotyping for polymorphisms at five microsatellites markers (BAT2, MIB, DQCAR, D6S105 and TNFd) within HLA region was performed on 143 healthy Korean controls. Results: The most frequent genotype shown in healthy Korean controls were BAT2 8 (153 bp, 42.7%), MIB 1 (326 bp, 40.6%), DQCAR 3 (188 bp, 38.5%), D6S105 7 (126 bp, 58.0%) and TNFd 3 (128 bp, 58.0%). And common two-loci haplotypes were found as MIB 1-HLA-B*62 (HF: 10.6%), MIB 6-HLA-B*44 (HF: 7.8%), DQCAR 3-HLA-DRB1*13 (HF: 8.5%), TNFd 5-HLA-B*62 (HF: 7.8%) and D6S105 7-HLA-A*02 (HF: 16.2%). Conclusion: These data might provide useful information on the microsatellites markers with HLA region in Korean population and be helpful in further defining the clinical impact of these microsatellites.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.16.1-16.5
• /
• 2018

Background: Proliferative verrucous leukoplakia (PVL) is an oral potentially malignant disorder, characterized by multifocal expression, progressive clinical evolution, and a high rate of malignant transformation. Evidence-based information regarding optimal PVL management is lacking, due to the paucity of data. The present report describes a case of PVL associated with HPV-16 infection and epithelial dysplasia treated by diode laser surgery, and the outcome of disease clinical remission over a 2-year follow-up period. Case report: A 61-year-old Caucasian male with oral verrucous hyperkeratosis presented for diagnosis. The lesions were localized on the maxillary gingiva and palatal alveolar ridge. Multiple biopsy specimens have been taken by mapping the keratotic lesion area. Microscopic examination was compatible with a diagnosis of PVL with focal mild dysplasia, localized in the right maxillary gingiva. Polymerase chain reaction (PCR) was done for human papillomavirus (HPV) detection which revealed presence of HPV DNA, and the genotype revealed HPV 16 in the sample. The PVL in the right gingival area was treated on an outpatient basis by excision with a diode laser. This approach resulted in good clinical response and decreased morbidity over a 2-year follow-up period. Conclusions: This case illustrates the benefit of a conservative approach by diode laser treatment than wide surgical excision for management of the PVL lesions associated with mild dysplasia and HPV-16 infection.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.210-217
• /
• 2013

The development of collaboration among information systems in accordance with changes in enterprises' business environment brings about the problems of duplication of the existing business services and increase in costs of maintenance. Accordingly, Web service has been suggested as the standard of distributed computing to prevent the duplication of services within the same business domain and to attain the services that are already being utilized. But since the data needed for Web services are not standardized, it is difficult for the users to find services that meet diverse business purposes. In this paper, we construct an ontology-based collaboration system for service interoperability. The ontology can support fusion service by finding services which are existed interdependently under the distributed environment for collaboration processing. The role of the collaborative system includes development, registration and call of services based on ontology. A local systems request collaboration support through the service profile. Collaborative system supports the development of service using the service profiles, represents the semantic association between real data through system ontology, and infers relationship between instances contained in the services. Based on this, we applied the travel booking services for collaboration system. As a result, service can be managed effectively preventing collision in collaborative system, and we verify that the mapping between system is reduced.

• Korean Journal of Remote Sensing
• /
• v.21 no.4
• /
• pp.287-302
• /
• 2005

Digital Elevation Models (DEMs) were generated by ERS-l/2 and JERS-1 SAR interferometry in Daejon area, Korea. The quality of the DEM's was evaluated by the Ground Control Points (GCPs) in city area where GCPs were determined by GPS surveys, while in the mountain area with no GCPs, a 1:25,000 digital map was used. In order to minimize errors due to the inaccurate satellite orbit information and the phase unwrapping procedure, a Differential InSAR (DInSAR) was implemented in addition to the traditional InSAR analysis for DEM generation. In addition, DEMs from GTOPO30, SRTM-3, and 1:25,000 digital map were used for assessment the resolution of the DEM generated from DInSAR. 5-6 meters of elevation errors were found in the flat area regardless of the usage and the resolution of DEM, as a result of InSAR analyzing with a pair of ERS tandem and 6 pairs of JERS-1 interferograms. In the mountain area, however, DInSAR with DEMs from SRTM-3 and the digital map was found to be very effective to reduce errors due to phase unwrapping procedure. Also errors due to low signal-to-noise ratio of radar images and atmospheric effect were attenuated in the DEMs generated from the stacking of 6 pairs of JERS-1. SAR interferometry with multiple pairs of SAR interferogram with low resolution DEM can be effectively used to enhance the resolution of DEM in terms of data processing time and cost.

• Korean Journal of Breeding Science
• /
• v.43 no.1
• /
• pp.81-91
• /
• 2011

Rice wild relatives have been recognized as reservoirs of genetic reinforcements to improve cultivating rice against biotic and abiotic stresses. A wild relative, Oryza. minuta(BBCC; Acc. 101141), was hybridized with a Korean Japonica cultivar, 'Hwaseong'(AA), followed by ovule culture and several times of back crossings to overcome high level of sterility. During evaluation of the introgression lines, breeding line exhibited resistance to bacterial blight with reasonable agronomic performances, and nominated as an elite breeding line, the 'Suweon497'. A mapping population, to dissect genetic basis of the resistance, was constructed by using $F_2$ progenies of the 'Suweon497' ${\times}$ 'Milyang23'. Association analysis between SSR marker genotypes and pathogenisity levels of each $F_2$ progeny revealed the end terminal region of rice chromosome 11 as the nesting place for the wild rice derived bacterial blight resistance gene, where at least four other genes, Xa3, Xa4, Xa26 and Xa31, have been reported.

• Korean Journal of Organic Agriculture
• /
• v.26 no.4
• /
• pp.759-774
• /
• 2018

This study was conducted to establish scores according to the importance levels of each HACCP evaluation item in cattle farm. The importance levels and score of each HACCP evaluation item was derived through the non-compliance rate and severity levels of hazard. In order to change the score criteria according to the importance of each HACCP evaluation item, we analyzed the importance of each HACCP evaluation item by using the portfolio mapping method according to the occurrence frequency and severity levels of hazard. The scores were classified into 3 point, 2 point, and 1 point, respectively, by classifying the importance of each category as 'high', 'middle' and 'lower'. Accordingly, we have established a now scoring system of each HACCP evaluation item through this study. Through the result of this study, the objectivity of the comparative evaluation was verified by implementing the currently used HACCP evaluation item to the cattle farm. In conclusion, Implementation of the result of this study to cattle farm may help to increase the objectivity and also improve more safety and hygienic cattle management and raw milk production.

• The korean journal of orthodontics
• /
• v.52 no.1
• /
• pp.3-19
• /
• 2022

Objective: The purpose of this study was to investigate the accuracy of one-step automated orthodontic diagnosis of skeletodental discrepancies using a convolutional neural network (CNN) and lateral cephalogram images with different qualities from nationwide multi-hospitals. Methods: Among 2,174 lateral cephalograms, 1,993 cephalograms from two hospitals were used for training and internal test sets and 181 cephalograms from eight other hospitals were used for an external test set. They were divided into three classification groups according to anteroposterior skeletal discrepancies (Class I, II, and III), vertical skeletal discrepancies (normodivergent, hypodivergent, and hyperdivergent patterns), and vertical dental discrepancies (normal overbite, deep bite, and open bite) as a gold standard. Pre-trained DenseNet-169 was used as a CNN classifier model. Diagnostic performance was evaluated by receiver operating characteristic (ROC) analysis, t-stochastic neighbor embedding (t-SNE), and gradient-weighted class activation mapping (Grad-CAM). Results: In the ROC analysis, the mean area under the curve and the mean accuracy of all classifications were high with both internal and external test sets (all, > 0.89 and > 0.80). In the t-SNE analysis, our model succeeded in creating good separation between three classification groups. Grad-CAM figures showed differences in the location and size of the focus areas between three classification groups in each diagnosis. Conclusions: Since the accuracy of our model was validated with both internal and external test sets, it shows the possible usefulness of a one-step automated orthodontic diagnosis tool using a CNN model. However, it still needs technical improvement in terms of classifying vertical dental discrepancies.

• Animal Bioscience
• /
• v.36 no.4
• /
• pp.570-583
• /
• 2023

Objective: Fibroblast growth factors (FGFs) play critical roles in embryo development, and immune responses to infectious diseases. In this study, to investigate the roles of FGFs, we performed genome-wide identification, expression, and functional analyses of FGF family members in chickens. Methods: Chicken FGFs genes were identified and analyzed by using bioinformatics approach. Expression profiles and Hierarchical cluster analysis of the FGFs genes in different chicken tissues were obtained from the genome-wide RNA-seq. Results: A total of 20 FGF genes were identified in the chicken genome, which were classified into seven distinct groups (A-F) in the phylogenetic tree. Gene structure analysis revealed that members of the same clade had the same or similar exon-intron structure. Chromosome mapping suggested that FGF genes were widely dispersed across the chicken genome and were located on chromosomes 1, 4-6, 9-10, 13, 15, 28, and Z. In addition, the interactions among FGF proteins and between FGFs and mitogen-activated protein kinase (MAPK) proteins are limited, indicating that the remaining functions of FGF proteins should be further investigated in chickens. Kyoto encyclopedia of genes and genomes pathway analysis showed that FGF gene interacts with MAPK genes and are involved in stimulating signaling pathway and regulating immune responses. Furthermore, this study identified 15 differentially expressed genes (DEG) in 21 different growth stages during early chicken embryo development. RNA-sequencing data identified the DEG of FGFs on 1- and 3-days post infection in two indigenous Ri chicken lines infected with the highly pathogenic avian influenza virus H5N1 (HPAIV). Finally, all the genes examined through quantitative real-time polymerase chain reaction and RNA-Seq analyses showed similar responses to HPAIV infection in indigenous Ri chicken lines (R² = 0.92-0.95, p<0.01). Conclusion: This study provides significant insights into the potential functions of FGFs in chickens, including the regulation of MAPK signaling pathways and the immune response of chickens to HPAIV infections.

• Journal of Radiation Protection and Research
• /
• v.47 no.4
• /
• pp.237-245
• /
• 2022

Background: The current study reports measurements of activity concentrations of radon (²²⁰Rn) and thoron (²²⁰Rn) in dwellings, followed by inhalation dose assessment of the public, and then by the development of regulation and the national radon action plan (NRAP) in Cameroon. Materials and Methods: Radon, thoron, and thoron progeny measurements were carried out from 2014 to 2017 using radon-thoron discriminative detectors (commercially RADUET) in 450 dwellings and thoron progeny monitors in 350 dwellings. From 2019 to 2020, radon track detectors (commercially RADTRAK) were deployed in 1,400 dwellings. It was found that activity concentrations of radon range in 1,850 houses from 10 to 2,620 Bq/㎥ with a geometric mean of 76 Bq/㎥. Results and Discussion: Activity concentrations of thoron range from 20 to 700 Bq/㎥ with a geometric mean of 107 Bq/㎥. Thoron equilibrium factor ranges from 0.01 to 0.6, with an arithmetic mean of 0.09 that is higher than the default value of 0.02 given by UNSCEAR. On average, 49%, 9%, and 2% of all surveyed houses have radon concentrations above 100, 200, and 300 Bq/㎥, respectively. The average contribution of thoron to the inhalation dose due to radon and thoron exposure is about 40%. Thus, thoron cannot be neglected in dose assessment to avoid biased results in radio-epidemiological studies. Only radon was considered in the drafted regulation and in the NRAP adopted in October 2020. Reference levels of 300 Bq/㎥ and 1,000 Bq/㎥ were recommended for dwellings and workplaces. Conclusion: Priority actions for the coming years include the following: radon risk mapping, promotion of a protection policy against radon in buildings, integration of the radon prevention and mitigation into the training of construction specialists, mitigation of dwellings and workplaces with high radon levels, increased public awareness of the health risks associated with radon, and development of programs on the scientific and technical aspects.