• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.501-506
• /
• 1997

This is to investigate the physical properties of the commercially available Soft, Thomas, Minerva, and Philadelphia cervical braces which are widely used in orthopedics, neurosurgery, and rehabilitation medicine clinics as assisting devices or physical stabilization of cervical vertebrates, to use as a basic data or designing new type brace. Tensile strengths were observed by universal mechanical measuring device and Thomas brace required the highest stress to break by tensile stress. Durabilities against continuous frictional forces were also determined, and Minerva brace demonstrated the longest frictional time until being perforated. and Thomas/minerva braces are superior to the other braces in the effect of the material property on the skin tissue, as the animal test. According to these results, polyethylene is recommendable as a frame and preparation of pores in the material is favorable to provide ventilation to skin.

• Journal of Biomedical Engineering Research
• /
• v.18 no.3
• /
• pp.205-210
• /
• 1997

This is to investigate the physical properties of the commercially available Soft, Thomas, Minerva, and Philadelphia cervical braces which are widely used in orthopedics, neurosurgery, and rehabilitation medicine clinics as assisting devices for physical stabilization of cervical vertebrates, to use as a basic data for designing new type brace. Tensile strengths were observed by universal mechanical measuring device and Thomas brace required the highest stress to break by tensile stress. Durabilities against continuous frictional forces were also determined, and Minerva brace demonstrated the longest frictional time until being perforated. According to these results, poly ethlene is recommendable as a frame and preparation of pores in the material is favorable to provide ventilation to skin.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.9
• /
• pp.4166-4182
• /
• 2018

We consider the Device-to-Device (D2D) communications in cellular networks where each cellular user (CU) shares the same resource with multiple D2D users (DUs). In this paper, we aim to maximize the energy efficiency (EE) of the D2D networks, subject to an interference constraint required by the CU. Since the cellular and D2D communications belong to different networks, we consider to incentivize base station (BS) while assisting the DUs. To this end, we propose a Stackelberg game based interference pricing framework for the considered D2D communications in cellular networks. Unlike most of the existing methods, we use interference pricing framework to jointly address the EE resource allocation problem and the interference management in our networks rather than only improve the EE of the DUs or protect cellular networks. In particular, BS and all the users do not need all channel state information, which is more realistic in practice. In addition, two different pricing strategies are also proposed. Based on the two strategies, we analyze the equilibrium of the game. Moreover, in the first strategy, the upper and lower boundaries of the interference price are obtained. The closed-form expression is gained with a backward induction for the second strategy. Both offer valuable insights to the considered scenarios. Finally, compared with the existing work, the EE of the D2D communications is significantly improved. The advantageous performance of our scheme are demonstrated by the simulation results.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.2
• /
• pp.143-150
• /
• 2023

As Korea's per capita income increases, participation in various leisure activities to improve the quality of life of the disabled is encouraged. However, in order to participate in leisure activities, movement to the place where the leisure activities are performed must be preceded, so interest in means of transportation for leisure activities of the disabled is increasing. Since manual and electric wheelchairs have their respective disadvantages as means of transportation for leisure activities, interest in power assisting devices for wheelchairs combining the functions of electric wheelchairs with manual wheelchairs is increasing. In this study, the FDA approval process of wheelchair power-assistance products was investigated, and the characteristics of side-attached, front-attached, downward-attached, and rear-attached types of power assist devices for wheelchairs wheelchair in countries around the world were identified. These information will be of great use in helping the disabled and their assistants in Korea to choose the optimal product according to the patient's condition. More usability tests and clinical case studies are needed so that people with disabilities can choose a power assist device suitable for them.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.9
• /
• pp.739-745
• /
• 2014

Although medication is given to heart disease patients, conventional medication alone is not sufficient to treat heart disease. However, it has been reported that left ventricular assist device (LVAD) transplantation is an effective bridge to heart transplantation by assisting cardiac function. This study used long-term animal testing and emergency situations with a bovine model (Holstein) and canine model (Labrador-retriever) to evaluate the biocompatibility of LibraHeart-I (LH-1), which is a bent-tube type of LVAD that was developed in a previous study. In the long-term animal testing with the bovine model, the subjects survived for 49 days with no irregularities observed in their complete blood cell counts or the vital sign tests that were carried out during the test period. In short-term animal testing with the canine model, it was observed that blood did not remain inside the LH-I even without power support from an external drive source. In this study, the biocompatibility of the LH-I that was developed in a previous study was verified by the ejection performance during long-term animal testing and emergency situations.

• Journal of Sensor Science and Technology
• /
• v.17 no.5
• /
• pp.350-360
• /
• 2008

In every large hospital, nurses must perform simple repetitive tasks such as measuring body temperature. Such tedious work reduces nurses' motivation to provide quality medical care, which is an important element of the medical services provided by a hospital. If a device were available to measure body temperature, nurses could focus on the more important aspects of providing quality medical care to the patients. However, body temperature is generally measured from the throat, anus, tympanum or armpit, where it is difficult to affix a patch type device. In addition, general body temperature measuring points shows moving artifact error; therefore, it is not good point to continually measure the temperature. In this paper, a patch type skin temperature measuring system was developed. To appropriately measure the skin temperature, a thermal transducer was implemented with a thin (0.5 mm) temperature sensor. The system is small and thin ($H6.6{\sim}5.3{\times}L35{\times}W24\;mm$), and weighs only 5 g including a battery, case and circuit; therefore, it is small and light enough to function as a patch type device. Moreover, the system worked for 5 days. To investigate differences between the experimental and conventional thermometer, simple clinical experiments were performed with 17 volunteers, and the result showed some correlation between the implemented system and conventional thermometer (Correlation coefficient = 0.647, P<0.1).

• Korean Institute of Interior Design Journal
• /
• v.22 no.6
• /
• pp.212-219
• /
• 2013

This study uses a fashion shop facade design to track human gaze, find gaze frequency for gaze time for the gaze points along the path of sight, and expose the importance of facade design and figure out the value through theoretical systematization. Thus, this study employed the measurement method in physiological psychology which is sight-tracking device with eye-tracking to perform effective data evaluation. To find gaze frequency and study the contents to reflect on the facade, precedent study review, and case study of facade design to collect stimulants to be used in eye-tracking experiment were executed. And the eye-tracking experiment which traces the movement of eye[pupil] was performed. As the result of analyzing gaze frequency, The characteristics of such gaze path formation made the characteristics for gaze frequency even clearer. What was characteristic in the analysis result according to 'average value for gaze time' was that only 8 out of 2000 areas showed over 1 second of frequency and, and all other shoed less than 1 second of gaze time. This indicates that human sight endlessly jumps around, and that it 'Stay' where it has interest. This study found the average of the frequency of this 'Stay' in facade design. This study well presents the major points to add value to the design of the space of facade based on scientific measurement/analysis data obtained through visual understanding. Through such, this study is thought to be able to have a positive interaction with marketing by forming a theoretical background bringing utility to purchase environment and assisting in sales increase.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.10
• /
• pp.1219-1227
• /
• 2013

A new type of wearable robot is developed for a disabled person with disabled limbs, that is, a person who cannot intentionally move his/her legs and arms. This robot can enable the disabled person to grip an object using eye movements. A gaze tracking algorithm is employed to detect pupil movements by which the person observes the object to be gripped. By using this gaze tracking 2D information, the object is identified and the distance to the object is measured using a Kinect device installed on the robot shoulder. By using several coordinate transformations and a matching scheme, the final 3D information about the object from the base frame can be clearly identified, and the final position data is transmitted to the DSP-controlled robot controller, which enables the target object to be gripped successfully.

• The Journal of Korean Physical Therapy
• /
• v.23 no.2
• /
• pp.17-21
• /
• 2011

Purpose: The purpose of this study was to determine the correlations, if any, between SPPB (Short physical performance battery), FRT (Functional reach test), and TUG (Timed up and go test) in hospitalized frail people. Methods: Seventy frail elderly patients (male/female: 16/54) participated in this study. All subjects could walk with or without an assisting device and they had no mental problems. Subjects were scored on physical functioning using the SPPB, FRT, and TUG. The data were analyzed using Pearson Correlation Coefficients. Results: There was a statistically significant difference between (a) SPPB and (b) FRT (p<0.01) and TUG (p<0.01). SPPB and FRT scores showed a positive correlation (r = 0.38) and SPPB and TUG scores showed a negative correlation (r = -0.56). Conclusion: SPPB, FRT, TUG scores are correlated with each other. From these results, we conclude that the SPPB is a useful method for predicting walking, balance, and physical function in frail elderly people.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.4
• /
• pp.262-271
• /
• 2013

Owing to the development of mobile communication technology during the last a few years, the number of users of mobile devices such as the smartphone and the tablet PC has increased rapidly. As a result, the range of applications of the mobile devices has also been greatly expanded from an application for the convenience of daily life to an application for assisting the operations of industrial fields. Especially, portability of mobile devices can provide great help in collecting and using information on the production site. In shipbuilding production processes, it is difficult to collect changes of circumstance in the field and reflect the changes to schedule due to the low production automation rate and frequent changes in schedule. In this study, we propose a system to solve the problems of shipbuilding production processes such as the ones described above by using mobile devices. First of all, we organize the production information and production processes of the panel line through the analysis of shipyard panel line operations. Next, we have developed a system that can support the production execution plan of the panel line and monitor the production processes in the field. The system was developed utilizing application virtualization to allow access to the system from various platforms of mobile devices and PC's. The system was implemented using ooCBD methodology considering the future expansion of the system and ease of maintenance.