• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.281-288
• /
• 2003

In karst formation area, the tunnel support system is an important factor for the tunnel safety during operation. This paper presents the simplified tunnel support systems to be adopt in karst formation. For the tunnel planned in the project area, karst features and the expected scenarios in the tunnel area were developed based on the results of the geological and geotechnical assessment. In order to provide specific supporting system and construction details for a wide range of possible karst features, the generalized typical support systems are developed according to the classification of karst features. In addition, the initial support systems and construction sequence for each karst feature are also presented in this paper.

• Journal of Korean Critical Care Nursing
• /
• v.3 no.1
• /
• pp.79-88
• /
• 2010

Optimal nutrition serves to maintain normal organ function and to preserve body energy stores to guarantee survival during times of shortage of food. Adequate nutrition of intensive care unit (ICU) patients improves outcome, while malnutrition is strongly associated with increased morbidity and mortality rates among critically ill patients. Previously published researches showed that trials of nutritional support in critical illness rarely fulfill basic quality requirements. Nutrition support plays a vital role in the prevention and treatment of nutritional deficiencies in at-risk, critically ill patients. This paper reviewed the challenges in determining critically ill patients' nutrition requirements including nutrition assessment, determination of caloric requirements then providing them with adequate nutrition support while in the ICU with the guidelines published by Society of Critical Care Medicine and American Society for Parenteral and Enteral Nutrition. Nutrition support can be effectively enhanced by using the guidelines.

• Journal of Wind Energy
• /
• v.9 no.4
• /
• pp.16-23
• /
• 2018

A damage detection method for the tripod support structure of offshore wind turbines is presented for structural health monitoring. A finite element model of a prototype tripod support structure is established and the modal properties are calculated. The degree and location of the damage are estimated based on the neural network technique using the changes of natural frequencies and mode shape due to the damage. The stress distribution occurring in the support structure is obtained by a dynamic analysis for the wind turbine system to select the output data of the neural network. The natural frequencies and mode shapes for 36 possible damage scenarios were used for the input data of the learned neural network for damage assessment. The estimated damages agreed reasonably well with the accurate ones. The presented method could be effectively applied for damage detection and structural health monitoring of various types of support structures of offshore wind turbines.

• Health Policy and Management
• /
• v.28 no.3
• /
• pp.272-279
• /
• 2018

Since the introduction of new health technology assessment in 2007, benefit coverage process of health insurance related to new health technology has become an upgraded system through the evidence-based decisions. As a result of enforcing this system for 10 years, however, there have been several rising concerns. It needs to support the insufficient evidence of medical technologies, introduce reassessment system for post management of market entry technologies, and improve evaluation methods and process. In addition, there is the possibility of emerging an unheard-of medical technology, fused various categories like artificial intelligence, robot, information technology, physics and life science in the fourth industrial revolution. Now, new updated system introduced to improve new technology assessment, such as 'limited health technology assessment system,' 'system for postponement of new health technology assessment,' 'one-stop service system,' and 'integrated operation of approval for medical devices and new health technology assessment.' Therefore it needs to prepare the improvement plan for new health technology assessment to be established more advanced system, and we have to resolve concerns by communication with various healthcare experts and patients now and for ever.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.3
• /
• pp.32-44
• /
• 2012

The competitiveness of modern organizations highly depends upon organizational competencies rather than individual competencies. However, most of previous studies on project success focused on individual competencies, such as project manager's competency and leadership. Even though there are some assessment models for the organizational project competencies, they are limited in specific organizations and industries. Furthermore, it is difficult to apply them to domestic companies, especially to small and medium enterprises because some assessment items are inappropriate for them. The purpose of this study is to propose an organizational project competency assessment model that is suitable for evaluating small and medium enterprises. First, the assessment areas and items for each area are determined through extensive investigation of previous models including OPM3, CMMI, and PMBOK. Next, the weights of assessment areas and items are decided by AHP analysis of experts response in the field of the project management. Finally, a project competency assessment model with assessment sheets is proposed. The model proposed in this study might support managers of small and medium enterprises to find pros and cons of project competencies and to establish improvement plans.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.1
• /
• pp.50-56
• /
• 2019

Objective: The aim of this study is to analyze the reliability assessment of work environment measurement, and to propose ways of improving the system. Methods: We have reviewed reports and articles on the reliability assessment written by KOSHA and academia in order to analyze problems related with the system and propose the alternatives. Results: There are three ways to improve the system of the reliability assessment. First of all, it is necessary to perform the reliability assessment by measuring the work environment when workers raise questions about the results so we can make workers trust these results of the reliability assessment. Secondly, we should inspect the workplace at first, not the work environment service provider, so we can increase the employer's recognition of his duty to practice the work environment measurement. Thirdly, the technical committee is needed for technical issues related with the work environment measurement. Conclusions: Above all, it is crucial to get the workers' interest and trust to improve the work environment measurement. The reliability assessment should support the meaning and value of the work environment measurement by practicing the reliability assessment whenever workers have a demand for this and operating the technical committee.

• Tunnel and Underground Space
• /
• v.20 no.1
• /
• pp.39-48
• /
• 2010

The present study developed a program which can assess the reliability of tunnel support systems based on a probability-based method. The developed program uses FLAC2D as a solver, and can automatically execute all the processes, associated with numerical and probabilistic analysis. Since a numerical analysis, which models the ground, requires a significant calculation time, it is actually impossible to apply simulation-based methods to probabilistic assessment on the reliability of tunnel support systems. Therefore, the present study used a point estimate method, which is efficient for probabilistic analysis since the method can significantly reduce the number of samples when compared with the simulation-based method. The developed program was applied to a tunnel project, and the results were compared with those through a deterministic approach. From the comparison, it was identified that a probabilistic approach can quantitatively assess the reliability of tunnel support systems based on probability of failure and can be used as a tool for decision making in tunnel support designs.

• Journal of Practical Engineering Education
• /
• v.7 no.1
• /
• pp.47-55
• /
• 2015

This study has the objective of proposing the basic data for the political and administrative support needs so that the Echo generation can be prepared with the supper-aged society, by verifying the perception level and degree of necessity about the outplacement support service, whether they want to be serviced or not, and necessary contents in the service with the employed people and non-employed people as objects among the Echo generation in the Southeast region. The study result derived from these effort is illustrated as follows. The perception level of the Echo generation about outplacement support service showed to be significantly different according to the gender, age, industry type, and career. The degree of needs was significantly different depending on the age. For the provision period of the outplacement support service, the opinions were that 3 months before the retirement was most appropriate. The intention of participation when the outplacement support service is provided showed to be significantly different depending on the age.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.2 s.257
• /
• pp.277-284
• /
• 2007

The steam generator in a nuclear power plant is a large heat exchanger that uses heat from a reactor to generate steam to drive the turbine generator. Rupture of a steam generator tube can result in release of fission products to environment outside. Therefore, an accurate integrity assessment of the steam generator tubes with cracks is of great importance for maintaining the safety of a nuclear power plant. The steam generator tubes are supported at regular intervals by support plates and rotations of the tubes are restrained. Although it has been reported that the limit load for a circumferential crack is significantly affected by boundary condition of the tube, existing limit load solutions do not consider the restraining effect of support plate correctly. In addition, there are no limit load solutions for circumferential cracks in U-bend region with the effect of the support plate. This paper provides detailed limit load solutions for circumferential cracks in top of tube sheet and the U-bend regions of the steam generator tube with the actual boundary conditions to simulate the restraining effect of the support plate. Such solutions are developed based on three dimensional finite element analyses. The resulting limit load solutions are given in a polynomial form, and thus can be simply used in practical integrity assessment of the steam generator tubes.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.3
• /
• pp.227-234
• /
• 2008

The number of marine accidents have been decreased since various equipments for navigation control have been introduced to the marine vessels. However, disastrous marine accidents such as ship collisions are occurred more frequently. Therefore, IMO(International Maritime Organization) is enforcing the design requirement of structural strength for marine vessel. Also EU countries are developing new design methodologies and design tools to suggest the design guidance which can minimize the damage of commercial vessels in case of marine collision accidents. In this study, an integrated design system for the safety assessment has been presented to enhance the safety of damaged ships in marine collision accidents. The architecture of system is described by use-cases and IDEF functional analysis. Then an integrated system for safety assessment of damaged ship which is considering both damage stability and structural safety has been developed to support the ship design in early stage.