• Korean journal of food and cookery science
• /
• v.32 no.6
• /
• pp.724-733
• /
• 2016

Purpose: This study was to evaluate the microbiological quality of salads in lunchbox's based on the holding time and temperature at convenience and franchise stores. Methods: Cabbage salad and crab meat salad were targeted for microbiological quality assessment. They were tested for aerobic plate counts, coliforms, Escherichia coli, Staphylococcus aureus and Enterobacteriaceae and assessment were performed by Korean Food Standards Codex. Results: In cabbage salad at convenience franchise store's at $5^{\circ}C$, the aerobic plate counts did not exceed the Korean Food Standards Codex. For cabbage salad stored at $25^{\circ}C$, the aerobic plate counts was 5.08 log CFU/g we hours after purchase, which exceeded the Korean Food Standards Codex. In case of cabbage salad in franchise store, the E. coli and S. aureus count exceeded Korean Food Standards Codex 3 hours after purchase. Microbiological analysis did not exceed the Korean Food Standards Codex at $5^{\circ}C$ in crab meat salad in convenience store. At $25^{\circ}C$, the aerobic plate count was detected at 4.45 log CFU/g after 32 hours, coliforms, E. coli, and S. aureus did not detect, but Enterobacteriaceae was found to be 2.34 log CFU/g after 9 hours in franchise store's crab salad. Coliforms was detected at 1.18 log CFU/g after 3 hours, and S. aureus was detected at 2.04 log CFU/g after 6 hours at $25^{\circ}C$ in the franchise store. The lunchbox' salad under cold storage ($5^{\circ}C$) generally meet the Korean Food Standards Codex. Conclusion: The results indicate an urgent need to implement proper management guidelines for the production of lunchbox foods to ensure microbiological safety, and to improve the shelf life from production to consumption.

• Journal of Environmental Impact Assessment
• /
• v.2 no.2
• /
• pp.55-58
• /
• 1993

After establishing the EIA(Environmental Impact Assessment) act in the Federal Republic of Germany there still remain methodical and substantial deficits. So nearly every environmental impact study went to be a matter of experiments. The requirement for standardization of data sampling and evaluation has permanently been increasing. This is meant to ensure quality standards for the assessment of environmental impacts as well as to maintain reliability required by the projecting company. Such a harmonization is of special importance because of the strongly accelerated expansion of traffic infrastructure caused by the reunification of Germany. That is why the guideline "EIA carried out" for the German Railways company is in process of development This guideline, focussing on practical demands, comprises impacts of railways, adequate sets of indicators, feasible tools for the prognosis and evaluation of environmental reactions. "EIA carried out" will be introduced not only as a manual but also through workshops and pilot studies.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.12a
• /
• pp.675-690
• /
• 1999

This study is to answer the following three questions: (1) What is SPICE? (2) Is it flexible enough to be applied to the small projects such as the ones owned by local companies and government agencies. The standards and models which comprise SPICE (Software Process Improvement and Capability dEtermination) or IS0/IEC 15504 were thoroughly reviewed first Based on the standards, we developed a methodology for the assessment of software processes was developed. Then the methodology is applied for the assessment for three projects in Kwangju area. For this experiment, a university, a district office, and a IT company were selected. Both the development application of the methodology was considered to be successful. As we go through the assessment, we can be convinced that the foundation of the SPICE is very sound. As we stick to the principles of SPICE, the assessment methodology that we developed worked well. The study suggests several implications for the policy making.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.155-156
• /
• 2023

This study aims to analyze the factors that cause differences in the evaluation results of the life cycle carbon emissions assessment of buildings in both Korea and China as part of the methodology research of building life cycle assessment for Chinese buildings to promote building life cycle assessment in China. Specifically, it examines the building LCA standards of Korea and the standard for building carbon emission calculation in China as mentioned in the green building certification systems of both countries. Based on the investigation of the two standards, the life cycle carbon emissions of the evaluation target building were evaluated using the building life cycle assessment methods of both countries, and the influencing factors that cause differences in the life cycle carbon emission assessment results of the two countries were analyzed.

• Journal of Korean Society on Water Environment
• /
• v.22 no.5
• /
• pp.737-747
• /
• 2006

Ministry of Environment (MOE) of Korea has been implementing the water quality management policy to focus on the control of organic matters (BOD and COD) for 28 years since 1978 when the water quality standards had been established. However, the government and the public have begun to recognize the necessity of creating the best water environment for people and aquatic life, and also formulating the various measures of water pollution, Consequently, MOE of Korea is establishing the basic plan of water environment management, with the vision of "Clean Water, Eco River 2015." The major targets of water environment management plan are to maintain ecosystem health and to protect water quality from various hazardous substances in water bodies. In order to achieve the major targets, it is essential to amend the water quality standards, which bring about the systematic management of various pollutants and healthy ecosystem. Introduction of the new techniques of water environment assessment is also prerequisite to maintain sustainable water environment. These can be accomplished under the consideration of following suggestions in environmental quality standards. First, several criteria should be complemented in water quality standards; they include the improvement of the current water quality classification system, the strengthening and supplement of relevant parameters considering human health in the standards, the introduction of biotic indices, and management standards on eutrophication. Secondly, it should be considered to introduce the biological water quality standards using biotic indices and the management standards for sediments. Lastly, it needs to introduce or develop an ecological status classification which could be used in the assessment of the water environment as a whole.

• Journal of The Korean Association For Science Education
• /
• v.40 no.5
• /
• pp.473-483
• /
• 2020

The purpose of this study was to analyze the characteristics of students' academic achievement of middle school science curriculum achievement standards in the 2009 revised national curriculum and to generate implications for curriculum improvement. Based on the results of the 2015-2018 National Assessment of Educational Achievement (NAEA), we analyzed middle school students' mastery of 84 curriculum achievement standards. In the analysis, we used representative item information by achievement level and correct answer rate and checked the validity of the determination of mastery. According to the results of the analysis, 15 of the 84 achievement standards could not determine the degree of achievement. In science, many achievement standards could be mastered only by above-average group students. By achievement level, there were six achievement standards that advanced achievement-level students did not achieve, 38 achievement standards judged to represent mastery by advanced achievement-level students, 23 achievement standards judged to represent mastery by proficient achievement-level students, and two achievement standards judged to represent mastery by basic achievement-level students. By content area, the number of achievement standards corresponding to advanced and proficient levels was similar in the areas of motion and energy and earth and space domains. In the material and life domains, there were more achievement standards corresponding to advanced levels. Accordingly, it is necessary to reinforce customized teaching and learning activities in relation to achievement standards that were under-achieved.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.10
• /
• pp.134-140
• /
• 2007

In recent years, power equipment and system standards have been increasing in both number and complexity. The standards that will soon be introduced to KOREA is the transmission system standards for harmonic emission limits assessing in distorting loads. Utility engineers, being under increasing time constraints, are turning more and more to software to quickly solve problems. This paper describes the methodology used to implement the above standards in Microsoft Excel in order to assist utility engineers to readily apply these standards in practical situations.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.2
• /
• pp.190-200
• /
• 2017

In general, an assessment of the benefits and costs with regard to vehicle safety standards are validated before regulations are implemented. This paper performs this validation for the mandatory automobile safety devices requirement for new micro-mobility. The reviewed car safety standards involved the installation of seat belts, airbags, ABS, crash speed standards, and pedestrian warning system. The benefit was estimated as the cost of accident reduction due to the installation of vehicle safety standards. As a result, the safety belt showed a B / C of 4.0 or higher, and it was found that the seat belt should be installed from 2017. After the seatbelt regulation in 2017, the results of the scenarios with the airbag, ABS, crash speed of 40 km/h, and the pedestrian warning system showed B / C of 1.0 or more according to the year of regulation. This study can be useful as a tool in the decision-making process with regard to the timing and type of vehicle safety standards requirement of micro-mobility in the future.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.10
• /
• pp.54-59
• /
• 2015

In this paper, we evaluate safety of grounding system which is designed according to IEC standards. Safety assessment of construction site and grounding system of building is needed before construction for the safety of human in building. Until now, in case of domestic field, design of grounding system is proceeded based on methods which are proposed in IEEE Std. 80. In other words, it is not in the situation that grounding system is designed based on IEC standards. Therefore, we propose a method which designs grounding system and evaluates safety of it according to IEC standards. We measure ground resistance of construction site using measuring equipment of ground resistance. Using this value, soil structure and ground resistivity are obtained through program analysis. CDEGS program of SES company is used for simulation analysis.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.99-99
• /
• 2011

Fuel cell systems are a completely different form of electricity source that has been used so far and is an aggregation of multiple technologies with multidisciplinary features that can be operated safely only when gas and electrical safety are being considered. Since fuel cells generate through electrochemical reactions there are difficulties in ensuring electricity safety, power quality assessment, effective control and reliability standards for system faults using conventional inspection techniques and even though they are necessary as a primary means for reduction of CO2 owing to the Climate Convention, electrical safety assessment and measures are required for the prevention of faults in residential facilities. Although small-scaled distributed power supplies can be utilized as important means of peak control and energy management measures, research is required for observing the effects on the system and the development of inspection technology to ensure stable operation, and the electrical safety of residential fuel cell systems need to be assessed and the problems derived for establishing electrical safety standards. From the year 2002, Japan has established laws on technical safety standards and development and rules on the product specifications and standards for the industrialization of hydrogen fuel cells. Also, a lot of effort have been made for the commercialization of fuel cells by building one-stop certification services. Internationally, the IEC TC 105 has established international standards based on fuel cells. In order to protect the national interest, the country should be able to respond accordingly meet global standards. In fact, in Korea, to comply with the international trend, Korea Energy Management Corporation is establishing a certified agenda for fuel cells and Korean Agency for Technology and Standards is enacting technical standards for fuel cells. The current terms of fuel cells are that research has been focused more on the quality and performance of manufactured products rather than stable power operation and maintenance over time. In this paper, by considering the household fuel cell as a power device, the safety standards of the fuel cell system for a reliable operation with the existing power system is being proposed.