• Journal of Environmental Impact Assessment
• /
• v.21 no.5
• /
• pp.813-821
• /
• 2012

Environmental and public health concern for the emission of air pollutants from burn-up process in waste incineration plants located in the vicinity of living environment was increased during the past decade. The purpose of this study was to suggest of the simple and rapid method of priority setting model for the decision of full-scale public health assessment. This method was consists of total 5-step. Step 1 was "secure the satellite map" and we can use the satellite map which serves from the website such as NAVER Co. Step 2 was "drawing mesh on the map" for catch the point of occupation of environmental sensitivity facilities, and step 3 was "identification and sorting of the facilities", Step 4 was "setting of weight" using the "weighted linear combination (WLC) method". Finally, all facility was sorted by score. As a result, we can set a priority of 145 facilities based on 177 facilities which managed in local government. Facilities in Seoul metropolitan area was high rank in priority list. On the other side, Facilities located at the country or rural area was low rank because of low occupation of the house and the environmental sensitivity facilities such as kindergarten, elementary school, and hospital. In this study, we suggested simple and rapid method that using for screening procedure of public health assessment.

• Earthquakes and Structures
• /
• v.9 no.4
• /
• pp.911-936
• /
• 2015

This work evaluates the performance of a number of seismic assessment procedures when applied to a case study reinforced concrete (RC) wall building. The performance of each procedure is evaluated through its ability to accurately predict deformation demands, specifically, roof displacement, inter-storey drift ratio and wall curvatures are considered as the key engineering demand parameters. The different procedures include Direct Displacement-Based Assessment, nonlinear static analysis and nonlinear dynamic analysis. For the latter two approaches both lumped and distributed plasticity modelling are examined. To thoroughly test the different approaches the case study building is considered in different configurations to include the effects of unequal length walls and plan asymmetry. Recommendations are made as to which methods are suited to different scenarios, in particular focusing on the balance that needs to be made between accurate prediction of engineering demand parameters and the time and expertise required to undertake the different procedures. All methods are shown to have certain merits, but at the same time a number of the procedures are shown to have areas requiring further development. This work also highlights a number of key aspects related to the seismic response of RC wall buildings that may significantly impact the results of an assessment. These include the influence of higher-mode effects and variations in spectral shape with ductility demands.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.936-943
• /
• 2009

In this study, a risk assessment model based on the ETA (Event Tree Analysis) and FTA (Fault Tree Analysis) is developed according to the procedure of hazard analysis and risk assessment in order to estimate the risk quantitatively. The FTA technique is applied to estimate the branch probability (frequency) and the ETA technique is applied to estimate the consequence for each branch path on the ET (Event Tree). A risk assessment model is developed by the combination of those ETA and FTA. In addition, the reliability and the validity of the risk assessment model are verified by comparing the risk estimated through the developed model with the actual equivalent fatality.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.1
• /
• pp.1-12
• /
• 2005

Land suitability assessment is the procedure that assesses development, agriculture or conservation suitability of land according to such criteria as soil, location and usability. But there are many problems to execute land assessment by law. Problems include inadequate basic data, lack of linkage with the spatial planning system, and inefficiency in operation. The purpose of this study is to improve methods of land suitability assessment as a sustainable land use management tool using case study. In this study, land suitability assessment will be executed through GIS. On the basis of the results of this case study, practical and institutional problems are described, and technical solutions are suggested.

• Journal of Korean Society of Rural Planning
• /
• v.18 no.3
• /
• pp.43-55
• /
• 2012

This study proposes a self-assessment model and its implementing procedure for the local industry promotion project, the purpose of which is to develop strategies for successful carrying-out of the project by diagnosing carrying capacities of its interested parties. The model, developed principally based on Eckes' $Q{\times}A=E$ Evaluation Model, was applied to 85 project-concerned persons which had been participated in the local industry promotion project from 2009 to 2011. Through the applicability test works of this model, its usefulness and importance for better implementation of the project was ascertained, especially to reflect cultural changes of project actors positively. The actors' recognition level of the project should be one of the critical factors for the successful implementation of the local industry promotion project. So, the higher understanding in the local industry promotion project, the more positive assessment in all respects of the project. Finally, it should be considered that the assessment results might differ for the same assessment standards from assessers' different perspectives.

• Journal of Environmental Impact Assessment
• /
• v.26 no.5
• /
• pp.331-343
• /
• 2017

The important changes in water environment management in Korea can be summarized as the enactment of Act on the Integrated Control of Pollutant-Discharging Facilities. Therefore water quality impact assessment should be reexamined and be revised. This study examines the present water quality impact assessment items (permissible discharge limits, standards for effluent water quality including Total Pollutant Load Management System) and considers the land use regulation for water quality conservation and NVZs(Nitrate Vulnerable Zones of EU and England). It also considers lately adopted standards(maximum discharge standards, permissible discharge standards, and marginal discharge standards etc) based on Act on the Integrated Control of Pollutant-Discharging Facilities and then compares Korean BAT and its counterpart control technology of U.S.A. And it also compares the items of water quality impact assessment with those of Integrated Control of Pollutant-Discharging Facilities, based on EIS reporting items. This study suggests five improvement measures for water quality impact assessment. First reflection of discharge impact analysis on impact prediction and assessment, second reflection of permissible discharge standards on agreed standards in the EIA procedure, third, reflection of diversified BAT on mitigation measures in the EIA procedure, forth introduction of land use regulation such as NVZs, finally strengthening linkage between water quality items and land use items etc.

• Journal of Environmental Impact Assessment
• /
• v.22 no.6
• /
• pp.745-751
• /
• 2013

Environmental Specimen Banks (ESBs) have been established widely in the world since 1979 for monitoring long-term bio-accumulation of environmental pollutants. The ESBs perform the retrospective analysis of representative biological samples collected regularly and store them in cryogenic condition. In Korea, National Environmental Specimen Bank (NESB) was established in 2009. Since then, NESB had prepared the standard operating procedures (SOPs) for the seven kinds of specimens (Red Pine (Pinus densiflora), Common Carp (Cyprinus carpio), and etc.) for monitoring the effect of environmental pollution on the terrestrial ecosystem and river ecosystem. In 2012, NESB added Black-tailed Gull (Larus crassirostris)'s eggs to the list of the environmental specimen for monitoring marine environmental pollution. In this study, we sampled the eggs of the Black-tailed Gull on two islands (Baekryeongdo of the West Sea and Hongdo of the South Sea). Especially, we selected eggs which remained in the early stages of embryo development for certifying the consistent and stable monitoring for environmental pollutants in egg contents. However, it was not considered to classify an order of eggs per clutch in this study. It is known that the concentration variations of pollutants exist among eggs in one clutch. Therefore, it is needed to consider the positions of eggs in the laying sequences to meet the objective of bioaccumulation monitoring. We collected 30 eggs in each site but the amount may be insufficient to achieve storage target (over 2,000 g). Therefore, we need to consider an optimal sampling size.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.5
• /
• pp.78-82
• /
• 2014

This paper describes a brief aerodynamic design procedure of multi-stage axial turbine. The design procedure was established including one dimensional scratch design, through flow analysis with empirical correlations, two dimensional airfoil design and three dimensional airfoil stacking. Detailed aerodynamic performance assessment was done with full three dimensional CFD method at the design and off design conditions to construct turbine performance map. With the present method, aerodynamic design procedure of 1st and 2nd stages of high pressure turbine for 10,000lbf class turbofan engine was introduced.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.24-31
• /
• 2004

In order to decommission safely nuclear power plant, it is necessary for the procedure of residual radioactivity investigation in site to provide detailed guidance for planning, implementing, and evaluating environmental and facility radiological surveys conducted to demonstrate compliance with a dose or risk-based regulation. This study presents the procedure of residual radioactivity investigation in decommissioning site - Historical Site Assessment, Scoping Survey, characterization Survey, Remedial Action Support Survey, Final Status Survey - on the basis of MARSSIM(Multi-Agency Radiation Survey and Site Investigation Manual) and investigation cases of decommissioned or decommissioning nuclear power plant.

• Journal of Korean Society for Quality Management
• /
• v.42 no.4
• /
• pp.607-616
• /
• 2014

Purpose: This paper reviews popular measurement system indices and proposes a procedure for assessing a measurement system using two parameters with intraclass correlation and a factor for process capability. Methods: Gage Repeatability and Reproducibility(GR&R), precision-to-tolerance ratio(PTR), number of distinct categories, producer's and consumer's risks are employed to assess the measurement capabilities and discuss the relationships between measurement system metrics. Results: Two-dimensional plot by two parameters is presented to assess adequacy of the measurement system and process capability. A numerical example and previously studied case study are provided for illustration. Conclusion: The procedure proposed in this paper using two-dimension parameters provides a valuable procedure and helpful guidelines to quality and production managers in assessing the capabilities of a measurement system and choosing the needed actions to be the most benefit.