• Journal of the Korean Society of Systems Engineering
• /
• v.19 no.2
• /
• pp.74-91
• /
• 2023

This study provides an in-depth comparison and analysis of various risk assessment models widely used in modern industries, and proposes the most suitable model for risk assessment of offshore wind power in Korea. The assessment models were selected by considering various factors such as the purpose of risk assessment, stakeholder requirements, and characteristics of offshore wind power. We also emphasized the importance of using different risk assessment models in combination in situations of high uncertainty. To systematize the combination of risk assessment models, we used systems engineering which is effective to develop a new system. Systems engineering was used to define the complete, traceable functions from site requirements, and model-based systems engineering was used to manage the design information from requirements to detailed functions in a single model. The developed risk assessment module provide automatic conversion between risk assessment models to enable risk assessment suitable for offshore wind power. The functionality and usability of the offshore wind risk assessment module were verified by the evaluation of three wind power experts.

• Journal of Navigation and Port Research
• /
• v.35 no.4
• /
• pp.281-287
• /
• 2011

According to the Marine Traffic Safety Law, revised in 2009, Marine Traffic Safety Audit is introduced to secure the safe navigation, to prevent the marine accident and to maximize the efficiency of the port. In this audit system, marine traffic safety assessment is the most important scheme because the primary purpose of the audit system is to identify potential risk elements affecting safe navigation. Even though the reliability of audit result depends on the selection of assessment models, there are no independent assessment models for Korean coastal waters and most of models used in Korea currently are developed by foreign countries. Therefore, the development of the independent assessment model for Korean coastal water is required. This study, prior to the development of independent assessment model, aims to provide a basic data by comparing two foreign assessment models in Ulsan port area with marine accident statistics data.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.5
• /
• pp.1759-1764
• /
• 2015

Purpose: To establish the concept of lung cancer hazard assessment theoretical models, evaluating the degree of lung cancer risk of Beijing for regional population lung cancer hazard assessment to provide a basis for technical support. Materials and Methods: ISO standards were used to classify stratified analysis for the entire population, life cycle, processes and socioeconomic management. Associated risk factors were evaluated as lung cancer hazard risk assessment first class indicators. Study design: Using the above materials, indicators were given the weight coefficients, building lung cancer risk assessment theoretical models. Regional data for Beijing were entered into the theoretical model to calculate the parameters of each indicator and evaluate the degree of local lung cancer risk. Results: Adopting the concept of lung cancer hazard assessment and theoretical models for regional populations, we established a lung cancer hazard risk assessment system, including 2 first indicators, 8 secondary indicators and 18 third indicators. All indicators were given weight coefficients and used as information sources. Score of hazard for lung cancer was 84.4 in Beijing. Conclusions: Comprehensively and systematically building a lung cancer risk assessment theoretical model for regional populations in conceivable, evaluating the degree of lung cancer risk of Beijing, providing technical support and scientific basis for interventions for prevention.

• Journal of Environmental Health Sciences
• /
• v.50 no.1
• /
• pp.43-53
• /
• 2024

Background: Exposure assessment is an important part of risk assessment for consumer products. Exposure models are used when estimating consumer exposures by considering exposure routes, subjects, and circumstances. These models differ based on their tiers, types, and target populations. Consequently, exposure estimates may vary between models. Objectives: This study aimed to compare the results of different exposure models using identical exposure factors. Methods: Chemical exposure from consumer products was calculated using four consumer exposure assessment models: Targeted Risk Assessment 3.1, Consumer Exposure Model 2.1 (CEM), ConsExpo web 1.1.1, and the Korean Exposure Algorithm (primary and detailed) issued by the Ministry of Environment, No. 972 (MOE). The same exposure factors were used in each model to calculate inhalation and dermal exposures to acetaldehyde, d-limonene, and naphthalene in all-purpose cleaners, leather coating sprays, and sealants. Results: In the results, TRA provided the highest estimate. Generally, MOE (detailed), CEM and ConsExpo showed lower exposures. The inhalation exposure for leather coating spray showed the largest differences between models, with differences reaching up to 1.2×10⁷ times. Since identical inputs were used for the calculations, it is likely that the models significantly influenced the estimated results. Conclusions: Despite using the same exposure factors to calculate dermal and inhalation exposures, the results varied substantially based on the model's exposure algorithm. Therefore, selecting an exposure model for assessing consumer products should be done with careful consideration.

• Journal of Convergence for Information Technology
• /
• v.11 no.11
• /
• pp.335-344
• /
• 2021

The purpose of this paper is the development of course data models and learning achievement computation algorithms for enabling the course-embedded assessment(CEA), which is essential of competency-based education in higher education. The previous works related CEA have weakness in the development of the systematic solution for CEA computation. In this paper, we propose data models and algorithms to implement competency-based assessment system. Our data models are composed of a layered architecture of learning outcomes, learning modules and activities, and an associative matrix of learning outcomes and activities. The proposed methods can be applied to the development of the course-embedded assessment system as core modules. We evaluated the effectiveness of our proposed models through applying the models to a practical course, Java Programing. From the result of the experiments we found that our models can be used in the assessment system as a core module.

• Journal of Environmental Impact Assessment
• /
• v.9 no.1
• /
• pp.13-24
• /
• 2000

This paper presents a study of water quality model applications in environmental impact statements which were submitted during recent years in Korea. Most of the applications have reported that the development projects would have significant impacts on the water quality, especially, of streams and rivers. The water quality models, however, were hardly used as an impact prediction tool. Even in the cases where models were used, calibration and verification studies were not performed and thus the predicted results would not be reliable. These poor model applications in environmental impact assessment can be attributable to the fact that there were no available model application guidelines as well as no requirements by the review agency. In addition, the expected waste loads were improperly estimated in most cases, especially in non-point sources, and the predicted parameters were not good enough to understand water quality problems expected from the proposed plans. The effects of mitigation measures were not analyzed in most cases. Again, these can be attributed to no formal guidelines available for impact predictions until now. A brief guideline is described in this paper, including model selection, calibration and verification, impact prediction, and analysis of effects of mitigation measures. The results of this study indicate that the model application should be required to overcome the current improper predictions of environmental impacts and the guidelines should be developed in detail and provided.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.04a
• /
• pp.73-81
• /
• 1995

In Korea, the pilot construction of the first high-speed railroad on the Seoul-Pusan has already started 2 years ago. In the thesis, an attempt is made to develop reliability-based integrity-assessment models for the computer-aided control and maintenance of high-speed railroad bridges. The strength limit state models for PC railroad bridges encompass the bending and shear strengths as well as the strength interaction equations which simultaneously take into the element and system reliablities of the proposed limit states and reliability models. Then, the actual load carrying capacity and the realistic safety of bridges are evaluated using the system reliability-based equivalent strength, and the results are compared with those of the element reliability-based or conventional methods. Various parametric studies are performed for the proposed reliability-based safety and integrity-assessment models using the actual PC box girder bridges used in the pilot construction. And the sensitivity analyses are performed for the basic random variables included in strength limit state models. It is concluded that proposed models may be practically applied for the rational assessment of safety and integrity of high speed railroad bridges.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.21 no.1
• /
• pp.149-164
• /
• 2023

As part of the safety case development for generic disposal sites in Korea, it is necessary to develop generic assessment models using various geosphere-biosphere interfaces (GBIs) and potentially exposed groups (PEGs) that reflect the natural environmental characteristics and the lifestyles of people in Korea. In this study, a unique modeling strategy was developed to systematically construct and select Korean generic biosphere assessment models. The strategy includes three process steps (combination, screening, and experts' scoring) for the biosphere system conditions. First, various conditions, such as climate, topography, GBIs, and PEGs, were combined in the biosphere system. Second, the combined calculation cases were configured into interrelation matrices to screen out some calculation cases that were highly unlikely or less significant in terms of the exposure dose. Finally, the selected calculation cases were prioritized based on expert judgment by scoring the knowledge, probability, and importance. The results of this study can be implemented in the development of biosphere assessment models for Korean generic sites. It is believed that this systematic methodology for selecting the candidate calculation cases can contribute to increasing the confidence of future site-specific biosphere assessment models.

• Journal of Environmental Impact Assessment
• /
• v.9 no.1
• /
• pp.25-37
• /
• 2000

This paper presents a study of hydrological and hydraulic model applications in environmental impact statements which were submitted during recent years in Korea. In many cases (almost 70 %), the hydrological and hydraulic changes were neglected from the impact identification processes, even if the proposed actions would cause significant impacts on those environmental items. In most cases where the hydrological and hydraulic impacts were predicted, simple equations were used as an impact prediction tool. Computer models were used in very few cases(5%). Even in these few cases, models were improperly applied and thus the predicted impacts would not be reliable. The improper applications and the impact neglections are attributed to the fact that there are no available model application guidelines as well as no requirements by the review agency. The effects of mitigation measures were not analyzed in most cases. Again, these can be attributed to no formal guidelines available for impact predictions until now. A brief guideline is presented in this paper. This study suggested that the model application should be required and guided in detail by the review agency. It is also suggested that the hydrological and hydraulic items shoud be integrated with the water quality predictions in future, since the non-point source pollution runoff is based on the hydrologic phenomena and the water quality reactions on the hydraulic nature.

• Journal of Energy Engineering
• /
• v.1 no.1
• /
• pp.111-134
• /
• 1992

Energy system models have been broadly used for the solution of the assessment of technical and economical characteristics in the national energy systems. The purpose of this study is to overview the structures, potentials and usefulness of system models for energy technology assessment. The conventional models developed so far are not aquate to analyze the energy and environmental problems simultaneously. Energy system models integrated by multiobjective programming are also reviewed and discussed in this paper to judge their usefulness and applicability in simultaneously analyzing the energy and environmental problems.