A Study of Computer Models Used in Environmental Impact Assessment I : Water Quality Models

환경영향평가에 사용되는 컴퓨터 모델에 관한 연구 I : 수질 모델

  • Park, Seok-Soon (Department of Environmental Science and Engineering, Ewha Womans University) ;
  • Na, Eun-Hye (Department of Environmental Science and Engineering, Ewha Womans University)
  • 박석순 (이화여자대학교 공과대학 환경학과) ;
  • 나은혜 (이화여자대학교 공과대학 환경학과)
  • Published : 2000.03.31

Abstract

This paper presents a study of water quality model applications in environmental impact statements which were submitted during recent years in Korea. Most of the applications have reported that the development projects would have significant impacts on the water quality, especially, of streams and rivers. The water quality models, however, were hardly used as an impact prediction tool. Even in the cases where models were used, calibration and verification studies were not performed and thus the predicted results would not be reliable. These poor model applications in environmental impact assessment can be attributable to the fact that there were no available model application guidelines as well as no requirements by the review agency. In addition, the expected waste loads were improperly estimated in most cases, especially in non-point sources, and the predicted parameters were not good enough to understand water quality problems expected from the proposed plans. The effects of mitigation measures were not analyzed in most cases. Again, these can be attributed to no formal guidelines available for impact predictions until now. A brief guideline is described in this paper, including model selection, calibration and verification, impact prediction, and analysis of effects of mitigation measures. The results of this study indicate that the model application should be required to overcome the current improper predictions of environmental impacts and the guidelines should be developed in detail and provided.

Keywords