• Structural Engineering and Mechanics
• /
• 제58권3호
• /
• pp.443-458
• /
• 2016

In this paper, we propose a method for taking into account uncertainties based on the projection on polynomial chaos. Due to the manufacturing and assembly errors, uncertainties in material and geometric properties, the system parameters including assembly defect, damping coefficients, bending stiffness and traction-compression stiffness are uncertain. The proposed method is used to determine the dynamic response of a one-stage spur gear system with uncertainty associated to gear system parameters. An analysis of the effect of these parameters on the one stage gear system dynamic behavior is then treated. The simulation results are obtained by the polynomial chaos method for dynamic analysis under uncertainty. The proposed method is an efficient probabilistic tool for uncertainty propagation. The polynomial chaos results are compared with Monte Carlo simulations.

• 한국정밀공학회지
• /
• 제14권1호
• /
• pp.23-32
• /
• 1997

In this paper, systematic approach is studied about assemblability and disassemblability of parts in order to reduce the assembly cost, and to disassemble products easily which is possible to recycle the parts. For this purpose, we selected one subassembly, and analysed assembly and disassembly process. From this result, we found the weakpoints of assembly and disassembly process, and then, the influencing parameters of assemblability and disassemblability are defined. On the basis of the analysis of these parameters we grasped the interrelation between assemblability and disassemblability. And, guidelines for assemblability and disassemblability are developed. Finally design alternatives are evaluated quantitatively in the aspects of assembly and disassembly by using the guidelines which developed in this research.

• Nuclear Engineering and Technology
• /
• 제41권5호
• /
• pp.677-690
• /
• 2009

A previous study demonstrated that the two-row fuel assembly has much more favorable neutron-physical and thermal-hydraulic behavior than the conventional one-row fuel assemblies. Based on the newly developed two-row fuel assembly, an SCWR core is proposed and analyzed. The performance of the proposed core is investigated with 3-D coupled neutron-physical and thermal-hydraulic calculations. During the coupling procedure, the thermal-hydraulic behavior is analyzed using a sub-channel analysis code and the neutron-physical performance is computed with a 3-D diffusion code. This paper presents the main results achieved thus far related to the distribution of some neutronic and thermal-hydraulic parameters. It shows that with adjustment of the coolant and moderator mass flow in different assemblies, promising neutron-physical and thermal-hydraulic behavior of the SCWR core is achieved. A sensitivity study of the heat transfer correlation is also performed. Since the pin power in fuel assemblies can be non-uniform, a sub-channel analysis is necessary in order to investigate the detailed distribution of thermal-hydraulic parameters in the hottest fuel assembly. The sub-channel analysis is performed based on the bundle averaged parameters obtained with the core analysis. With the sub-channel analysis approach, more precise evaluation of the hot channel factor and maximum cladding surface temperature can be achieved. The difference in the results obtained with both the sub-channel analysis and the fuel assembly homogenized method confirms the importance of the sub-channel analysis.

• 대한기계학회논문집A
• /
• 제29권10호
• /
• pp.1377-1383
• /
• 2005

A general and efficient methodology has been developed to analyze dimensional variations of an assembly, taking into account of weld distortion. Weld distortion is generally probabilistic because of the random nature of welding parameters such as the welding speed, maximum welding temperature, ambient temperature, etc. The methodology is illustrated through a very simple example of two perpendicular plates fillet-welded to each other. Two steps comprise the methodology: establishment of a weld-distortion database, and tolerance analysis using the database. To establish the database, thermo-elasto-plastic finite element analyses are conducted to compute the weld distortion for all combinations of discrete values of major welding parameters. In the second step of tolerance analysis, the weld distortion retrieved from the database is used in addition to the dimensional tolerances of the parts. As a result of such an analysis, sensitivities of the assembly's dimensional variations to the part tolerances and weld distortion are obtained, which can be help improve the dimensional quality of the assembly.

• 한국터널지하공간학회 논문집
• /
• 제14권5호
• /
• pp.517-528
• /
• 2012

연마재 워터젯을 이용하여 암반을 굴착하기 위해서는 노즐이 삽입되고 절삭하는 연속적 공정이 요구된다. 본 연구에서는 노즐이 삽입되기 위한 충분한 절삭 폭을 확보하기 위해 한 쌍의 연마재 워터젯 노즐을 이용하여 암석 절삭실험을 실시하였다. 한 쌍의 노즐형태와 위치에 따른 기하학적 변수에 따라 암석 절삭형상과 절삭 폭이 달라지는 것을 확인하였다. 정의된 기하학적 변수에 따라 절삭 깊이 및 폭을 측정하여 암반에 형성되는 절삭단면 형상을 분석하였다. 그 중 노즐 삽입이 가능한 기하학적 변수를 제시하고 현장적용 가능성에 대해 검증하였다.

• Nuclear Engineering and Technology
• /
• 제33권3호
• /
• pp.298-306
• /
• 2001

As fuel burnup proceeds, thermal gradients, differential swelling, and inter-assembly loading may induce assembly duct bowing. Since duct bowing affects the reactivity, such as long or short term power-reactivity-decrement variations, handling problem, caused by top end deflection of the bowed assembly duct, and the integrity of the assembly duct itself. Assembly duct bowing were first observed at EBR-ll in 1965, and then several designs of assembly ducts and core restraint system were used to accommodate this problem. In this study, NUBOW-2D KMOD was used to analyze the bowing behavior of the assembly duct under the KALIMER(Korea Advanced Liquid MEtal Reactor) core restraint system conditions. The mechanical behavior of assembly ducts related to several design parameters are evaluated. ACLP(Above Core Load Pad) positions, the gap distance between the ducts, and the gap distance between the duct and restraint ring were selected as the sensitivity parameter for the evaluation of duct deflection.

• Nuclear Engineering and Technology
• /
• 제49권6호
• /
• pp.1339-1345
• /
• 2017

In the framework of the EU funded project NURESAFE, the subchannel code CTF and the neutronics code DYN3D were integrated and coupled on the NURESIM platform. The developments achieved during this 3-year project include assembly-level and pin-by-pin multiphysics thermal hydraulics/neutron kinetics coupling. In order to test this coupling, a PWR rod ejection transient was simulated on a MOX/UOX minicore. The transient is simulated using two different models of the minicore. In the first simulation, both codes model the core with an assembly-wise resolution. In the second simulation, a pin-by-pin fuel-centered model is used in CTF for the central assembly, and a pin power reconstruction method is applied in DYN3D. The analysis shows the influence of the different models on global parameters, such as the power and the average fuel temperature, but also on local parameters such as the maximum fuel temperature.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.336-341
• /
• 1993

Automatic Assembly Systems(AAS) are a class of systems exhibiting concurrency, asynchronicity and distributedness, and can be modeled by Petri Nets. In this paper, we design two types of configuration of part-assembly system in the car manufacturing line, as an example of AAS. And, we make a modeling the system by utilizing Extended Petri Nets, simulation as varying machine parameters, and analysis of operation status. These enable to present the information of optimal status and various problems occurring in the system for achieving high production rate.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1998년도 추계학술대회 논문집
• /
• pp.223-223
• /
• 1998

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.737-740
• /
• 1996

This paper suggests a boltzman machine neural network model to determine model input sequences in line balancing process of mixed model assembly line. We first present a proper energy function, next determine the value of parameters using simulation process.