• 인지과학
• /
• 제19권3호
• /
• pp.283-295
• /
• 2008

SMS나 메신저의 사용이 증가함에 따자 의도적으로 음절을 해체한 새로운 형태의 문장들이 젊은이들 사이에서 습관적으로 사용되고 있다. 이러한 상황에서 자연어 인터페이스 시스템을 개발하기 위해서는 해체된 한글 음절을 결합하여 올바른 문장을 만들어 주는 기술이 먼저 개발되어야 한다. 본 논문에서는 해체된 음절을 2단계 규칙을 이용하여 결합해주는 방법을 제안한다. 1단계에서는 수동으로 자성한 휴리스틱을 이용하여 단순하게 초성, 중성, 종성으로만 해체된 음절을 결합한다. 그리고 2단계에서는 매핑 테이블과 변환기반 학습을 이용하여 복자음까지 해체된 음절을 결합한다. 실험 결과, 제안한 방법은 단순 해체 음절의 결합과 복자음 해체 음절의 결합에서 각각 100%와 99.98%라는 매우 높은 정확률을 보였다.

• 한국지반공학회논문집
• /
• 제29권6호
• /
• pp.33-51
• /
• 2013

본 논문에서는 현재 개발 중인 쉴드터널의 강연선 체결 방식에 대해 소개하고 두 번에 걸친 실대형 세그먼트 체결시험 결과를 나타내었다. 실대형 세그먼트 체결시험을 통해 기존 볼트 체결 방식과 강선을 이용한 체결 방식을 비교하여 체결재로써의 강연선 적용 가능성에 대한 검토를 수행하고, 강연선 체결 방식 적용 시 세그먼트에 발생하는 체결력의 역학적 거동을 분석하였다. 연구를 통해 기존 세그먼트 체결장치와 비교하여 높은 체결력을 얻을 수 있으며, 터널 세그먼트 전체의 일체화 거동 및 구조적인 안정성 증가를 기대할 수 있음을 확인하였다. 또한, 볼트 체결 대비 강연선 체결 방식이 세그먼트 체결에 더 효과 적일 수 있으며, 강연선이 세그먼트 체결 장치로서의 적용성도 좋은 것으로 사료된다.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.5-11
• /
• 2006

This paper is launched to get an exact bore-sighting value in the process of assembling for a dual-barrel weapon. Image processing method with a CCD(Charged Coupled Device) camera is chosen for the error reduction of bore-sighting. The results of this method by using a CCD camera and the testing target method are described in this paper. After the performance of the dual-barrel weapon and that of the fire-control system in the dual barrel weapon system is confirmed, the bore-sighting which is a part of the process in the system assembly is accomplished. In this process, the position of the barrel is identified by using the testing target method that is an existing bore-sighting method. Then, the fixing line of the fire-control system is checked by a day-optical part. The precision of the bore-sighting is required within several mils, however the manual method using the naked eyes makes it worse. Therefore, a CCD camera is installed in the eyepieces. Next, we can get an image of the sighting and the center coordinate values of the laser-pointer from each barrel by image processing method. A required bore-sighting value is calculated from the eccentricity of the center coordinate. Finally, It can be applied to adopt this result in the assembling process of the dual-barrel weapon.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.818-823
• /
• 2012

Assessment of the dynamics properties, like damping, dynamic stiffness and resonance sharpness is essential for the development of a robust system, specifically for the reduction of a traction motor noise. A practical method for identifying dynamic characteristics of a traction motor hosing for an electric vehicle is proposed. Assembling using interference fit of the components of the motor is attributed to the main cause of strong nonlinearity. It is well known that nonlinearity of a structure makes it difficult to assess damping properties or dynamic characteristics of the system. This research presents a practical damping or dynamic stiffness identifying procedures for a nonlinear system according to the boundary condition between assembled components. Based on the simple idea that impact forces of modal tests are highly affected on the condition of the hammer tip, Auto Power Spectrum of the impact forces are used to assess the assembling condition and dynamic characteristics of the system, especially, damping of the system.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년 추계학술발표대회 논문집
• /
• pp.448-451
• /
• 2008

This study is under doing to suggest application manual using assembling reference plane design & standard finish material basis upon material classification code as a tool of a linkage between building design and construction standarization in order to enlarge the applicability of house building material that is produced by the module plant. We can say the goal of building standardization intend not only the improvement of construction productibility but also guarantee of subsequent performance through automatization basis upon informationalization of building design. For a etabilishing of this condition, it is neccessary to link the standardization's result of material--design--construction field. According to this neccessity, we are going to suggest information factor that can make relative business manager easily approach to the standardization practical task.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.269-272
• /
• 1999

It is still hard to measure the strain distribution over entire surface of a medium or large-size stamped part even by using an automated strain measurement system. Several methods which enable to enlarge the measurement range without losing accuracy and precision are suggested in this study, The superposition of images having different high-lightened or damaged part each other results in an enhanced image. A new method for constructing the element connectivity from a line-thinned image makes it possible to identify up to 1,000 elements. And the geometry assembling algorithm is proved very efficient in which the whole area to be measured is divided into several parts ; the coordinate transformation between every two adjacent parts is obtained from the concept of the least square error ; and the 3-D shape or strain distribution over the whole surface is assembled,

• 소성∙가공
• /
• 제9권4호
• /
• pp.404-412
• /
• 2000

It is desirable to use the square grid analysis with the aid of the stereo vision and image processing techniques in order to automatically measure the surface-strain distribution over a stamped part. But this method has some inherent problems such as the difficulty in enhancement of bad images, the measurement error due to the digital image resolution and the limit of the area that can be measured at a time. Therefore, it is still hard to measure the strain distribution over the entire surface of a medium-or large-sized stamped part even by using an automated strain measurement system. In this study, several methods which enable to solve these problems considerably without losing accuracy and precision In measurement are suggested. The superposition of images that have different high-lightened or damaged part from each other gives much enhanced image. A new algorithm for constructing of the element connectivity from the line-thinned image helps recognize up to 1,000 elements. And the geometry assembling algorithm including the global error minimization makes it possible to measure a large specimen with reliability and efficiency.

• 한국CDE학회논문집
• /
• 제2권2호
• /
• pp.93-102
• /
• 1997

Most design changes are due to interferences and fit-up as parts are assembled if such a large product as an automobile or an aircraft is developed by many concurrent engineers. In this part (1) of the thesis, the assembly-centric modeling methodology with CAD systems is proposed in order to reduce the design changes. Unlike part-centric modeling method, a part is modeled with its own coordinate system which is used in downstream process as machining and measuring. The part coordinates initially have the same orientation as its assembly which is predefined in BOM (Bill of Material). Then, the corrdinates origin of the part is moved to its location to be assembled from that of its assembly coordinate system. To implement this methodology, the position data of the part w.r.t. its assembly are stored in a database to build the same hierarchical assembling structure as BOM structure. This modeling approach has the advantage of reflecting asembling sequence, because the process of positioning parts is similar to that of real assembling. And with the method, a designer can easily adjust all of the part positions of an assembly to resolve interferences if he modifies just the coordinates origin of the assembly, which results in moving included parts and assemblies together.

• 한국광학회지
• /
• 제16권4호
• /
• pp.345-353
• /
• 2005

포토 다이오드(photodiode) 조정 방식을 이용해서, 비전 시스템을 장착한 고가의 정밀 자동 조립조정 장비 없이 홀로그램 픽업 모듈을 제작하는 새로운 방법을 제안하였다. 저가격화를 위해서 리드 프레임형의 반도체 레이저와 COB(Chip on Board)형의 포토 다이오드를 사용했고, 초점 에러 신호(focus error, FES) 검출방법은 스팟 사이즈 검출법(spot size detection, SSD), 트랙 에러 신호(tracking error, TES) 검출방법은 삼빔법(3 beam method)을 이용했다. 이를 만족하는 픽업 홀로그램 모듈 광학계를 설계하고, 조립조정 프로세스 수립 및 시스템을 제작하였으며, 조립된 홀로그램 모듈을 이용하여 CD에서 데이터를 검출하는 실험을 통해 제안된 포토 다이오드 조정방식의 유용함을 입증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.969-972
• /
• 2004

This paper describes the mechanism of parallel micro machine platform and its feedback control system for acquiring high accuracy. The parallel micro machine platform that has developed has 5x5x5 work-space and sub-micron accuracy. For the high accuracy, the feedback control system is important but errors in machining and assembling are inevitable. Kinematic calibration is important for this reason. In this paper, various error components are introduced and the effects of error component are analyzed.