• 한국소음진동공학회논문집
• /
• 제22권12호
• /
• pp.1191-1198
• /
• 2012

Highway traffic noise is the one of the most frequent pollutant source of environmental claims in Korea for the last 10 years. For abating the noise from the highways, characteristics of highway noise source should be investigated and identified before performing the abatements. Highway noises are affected by traffic volume, vehicle types and speed, tyre and pavement types. In this study, highway noises which measured from different pavements have been analyzed and compared. Especially, the noise from the asphalt concrete pavement, cement concrete pavement and low-noise pavement have been measured simultaneously at the same traffic condition and compared each other. Hopefully, the data of the study may be used for abating highway noise and further studies.

• 한국도로학회논문집
• /
• 제8권2호
• /
• pp.31-35
• /
• 2006

Cement stabilisation is a common method for stabilising recycled road base material and provides a longer pavement life. With cement effect, the increment of stiffness in the stabilised layer would provide better load transfer to the pavement foundation. The recycling method provides an environmentally option as the existing road base materials will not be removed. This paper presents a case study of a trial section along the North-South Expressway in West Malaysia, where the Falling Weight Deflectometer (FWD) was implemented to evaluate the compressive strength and in-situ stiffness of the cement stabilised road base material. The improvement in stiffness of the cement stabilised base layer was monitored, and samples were tested during the trial. FWD was found to be useful for the structural assessment of the cement-stabilised base layer prior to placement of asphalt layers. Results from the FWD were applied to verify the assumed design parameters for the pavement. Using the FWD, an empirical correlation between the deflection and the stiffness modulus of the pavement foundation is proposed.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.319-324
• /
• 2004

With a PMS, a maintenance plan should be drawn up after surface conditions are precisely examined and analyzed. The majority of the present PMSs are run by the fact that experts first examine surface conditions on sites, and then enter results into systems. However, considering the actual circumstances of the present time and an increase in paved road hereafter, it is inefficient that experts examine the whole paved roads in person and long-lasting PMSs can not be kept up. Therefore, in the study digital photogrammetry was used to examine asphalt concrete pavements. In a consequence, it was found that if databases are implemented in the future with quality digital image information accumulated from studies on roads, they will be able to provide the field of pavement management system with a large amount of information and data.

• 한국지열·수열에너지학회논문집
• /
• 제6권1호
• /
• pp.17-22
• /
• 2010

A sliding accident on the road have a high percentage by road freezing, especially, it is often appeared at bridges and tunnel of freezing areas. Thus, the stability of road operations is enhanced by preventing a partial freezing phenomenon. According to the geothermal snow melting system analysis, a pattern of thermal conductivity is found out about pavement materials of concrete and asphalt when it is buried. For the feasibility study on geothermal snow melting system, analysis of the ground melting point when operating system, life evaluation of pavements and safety evaluation of pipes are performed.

• Geomechanics and Engineering
• /
• 제13권5호
• /
• pp.793-807
• /
• 2017

Regularities of temperature variation were determined in points of subgrade of the highway. Measurement of temperature was performed by special sensors, based on the effect of thermal resistance. Regular measurements of temperature were performed for two sections of the highway with asphalt concrete and cement concrete pavements for continuous period from November 2010 to March 2016. Multi-year experimental data, which we obtained, allowed establishing of peculiarities for temperature variation in points of subgrade in time and temperature distribution in the depth for annual cycle. Characteristics were determined for winter period-depth, duration and freezing rate, duration and defreezing rate for pavement and subgrade of the highway.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.886-891
• /
• 2005

The frequent maintenance required on some asphalt concrete (AC) pavement sections has made reconstruction with Portland Cement Concrete Pavement (PCCP) a feasible alternative. However, many constructability issues need to be addressed in order to realize the full potential of this alternative. Accelerated paving encompasses three classes of activities: methods to accelerate the rate of strength gain, methods to minimize the construction time, and traffic control strategies to minimize user delay. Three major AC intersections with severe rutting problems were reconstructed with PCCP. The entire reconstruction of each intersection, including demolition of the AC pavement and its replacement with PCCP, took place over a period of three days, starting on Thursday evening and opening the intersection to the traffic on Sunday afternoon. This paper discusses the use of PCCP for accelerated reconstruction of major urban intersections with minimal user and traffic disruption, using innovative construction techniques and traffic management optimization principles and demonstrates that concrete pavements can be constructed efficiently and quickly.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권4호
• /
• pp.57-65
• /
• 2013

정유산업의 발달로 인하여 탈황과정에서 대량 발생되는 부산물인 황은 연간 120만톤 이상 발생되고 있으나 그 활용처가 제한되어 있어 수요처확보가 요구되는 실정이다. 이러한 부생유황은 내구성이 우수한 재료로서 건설재료에 활용가능성이 높아 이에 대한 연구가 활발히 이루어지고 있다. 한편, 아스팔트 및 콘크리트 포장의 단점을 보완하고 장점을 강화시킨 반강성 포장의 적용이 증대되고 있으나 균열억제 등의 목적으로 사용되는 아크릴레이트의 높은 비용으로 경제성이 저하되어 대체 재료의 개발이 요구되는 실정이다. 따라서 본 연구에서는 부생유황의 재활용 방안 제시와 sulfur polymer emulsion (SPE)을 혼입한 반강성 포장용 주입재의 공학적 성능검토 연구를 수행하였다. 평가 결과, 아크릴레이트를 SPE로 30%까지 대체한 주입재는 대체하지 않은 주입재에 비하여 우수한 유하시간과 강도특성을 나타내었다. 그러나 SPE 대체율이 50% 이상인 주입재는 오히려 성능이 떨어지는 경향을 나타내어 SPE의 적정 대체율은 30% 수준인 것으로 나타났다. SEM 분석을 이용하여 1종 보통포틀랜드시멘트 (OPC) 페이스트와 비교 연구를 수행한 결과, 초속경 시멘트를 사용한 주입재는 약 3시간의 재령에서 OPC의 7일 재령에 해당되는 수화 특성을 나타내었고 SPE의 혼입 여부와 상관없이 그 특성을 유지하는 것으로 나타났다. SPE를 30% 수준으로 대체한 주입재의 염해저항성은 OPC 수준에 해당되어 아크릴레이트만을 주입한 주입재에 비하여 월등히 우수한 성능을 보였다. 유하시간, 강도특성, 염해저항성 등을 모두 고려하여 볼 때, 이 연구의 범위에서는 SPE 대체율 30%가 적정 수준의 대체율인 것으로 나타났다.

• 한국지열·수열에너지학회논문집
• /
• 제19권3호
• /
• pp.1-13
• /
• 2023

Hydronic heated road pavement (HHP) systems have been well established and documented to provide road safety in winter season over the past two decades. However, most of the systems run on asphalt, only a few are tested with concrete, and there rarely is a comparison between those two common road materials in their performance. The aim of this study is to investigate the thermal performance of the concrete HHP systems, including surface temperature variations of experimental pavements in winter season. For preliminary study a small-scale experimental system was installed to evaluate the heat transfer characteristics of the concrete HHP in the test field. The system consists of 3 concrete slabs made of 1 m in width, 1 m in length, and 0.25 m in height. In these slabs, circulating water piping was embedded with different pipe depths of 0.08 m (Case A), 0.12 m (Case B), and 0.20 m (Case C) and same horizontal space of 0.16 m. Heating performance in winter season was tested with different inlet temperatures of 25℃, 30℃, 35℃ and 40℃ during the entire measurement period. Overall, the surface temperature of the concrete HHPs remained above 3℃ in all experimental conditions applied in this study. The results of the surface temperature measurement with respect to the pipe depth showed that Case B was the highest among the three cases. However, the closer the circulating water pipe was to the pavement surface, the greater the heat exchange rate. This results is considered that the heat is continuously accumulated inside the pavements and then the temperature inside the pavements increases, while the amount of heat dissipation decreases as the temperature difference between the inlet and outlet of circulating water decreases. In this preliminary test the applicability of the concrete HHP on road deicing was confirmed. Finally, the results can be used as a basis for studying the effects of various variables on road pavements through numerical analysis and for conducting large-scale empirical experiments.

• 한국도로학회논문집
• /
• 제4권2호
• /
• pp.33-42
• /
• 2002

포장은 건조수축이나 온도변화 또는 차량의 반복하중 등으로 인하여 균열이 발생하게 된다. 발생된 균열 부위로 우수의 침입 및 비압축성 물질이 침투하여 하부층의 지지력 저하, 과다한 스폴링, 2차 균열 등의 파손이 발생하게 된다. 이런 문제점을 해소하기 위해서는 균열폭을 제한하여 관리해야하며 이것은 정확한 균열폭 감지를 필요로 한다. 현재의 측정방법은 공간적 시간적으로 많은 제약을 받는 현미경을 이용한 육안조사가 전부인 실정이다. 본 연구의 목적은 망원렌즈를 장착한 자동포장상태 조사장비를 사용하여 도로에서 주위차량과 비슷한 속도로 주행하면서 가장 정확한 균열폭을 감지할수 있는 조건을 찾는 것이다. 본 연구는 모의조사를 통하여 균열폭 크기에 따른 카메라 초점거리를 결정하고 망원렌즈를 부착한 카메라로 노면을 확대 촬영한 자료를 이미지프로세싱 프로그램인 STADI-2에서 여러 가지 factor를 사용하여 산출된 균열폭과 현장조사를 통하여 현미경으로 실측한 균열폭을 비교 분석한 결과, 이미지프로세싱을 이용한 최적균열폭 감지조건을 제시하였다. 연구결과 CRCP(연속철근콘크리트포장)에서는 카메라 초점거리 75mm를 사용하여 균열폭 0.5mm$\sim$1.2mm일때 정확도 80%이상으로 측정 가능했으며 아스팔트포장에서는 카메라 초점거리 12.5mm를 사용하여 균열폭 1.8mm$\sim$3.3mm에서 90%의 정확도로 균열폭을 감지할 수 있었다.

• 한국도로학회논문집
• /
• 제9권2호
• /
• pp.129-140
• /
• 2007

본 연구의 주목적은 최근 국내 아스팔트 교면포장의 가장 빈번한 파손의 하나인 포트홀의 발생을 저감하기 위해 포장체내에 체류된 수분을 신속히 배수할 수 있는 배수시스템을 개발하는 것이다. 이러한 배수시스템은 방수층과 포장층 사이에 $2{\sim}3cm$의 두께로 박층의 배수층을 구성하는 것으로서 방수층의 내구성 확보와 골재 최대입경 10mm이하의 배수성 혼합물을 박층으로 시공하는 기술이 가장 중요한 사항이다. 이를 위해 본 연구에서는 먼저 NCAT 배합설계법을 바탕으로 10mm 이하 배수성 혼합물을 개발하였고, 다양한 실내시험을 통하여 배수성 혼합물이 모든 품질기준을 만족함을 확인하였다. 방수층의 경우 MMA(Methyl Methacrylate)계 방수제의 적용성을 평가하기 위하여 저온 휨 시험, 접착인장강도 시험 등의 시험을 실시하였고 모든 물성이 기준을 만족하였다. 본 연구에서 개발된 배수시스템의 현장시공성 및 공용성을 평가하기 위하여 고속도로의 1개소 교량에 시험시공을 실시하였다. 시공후 각 포장층 재료에 대한 품질확인 시험결과 모두 기준을 만족하였고 체류수가 원활히 배수되는 것을 확인할 수 있었다.