• 한국도로학회논문집
• /
• 제14권3호
• /
• pp.9-14
• /
• 2012

본 논문에서는 경량 프로파일러를 이용한 프로파일을 측정하여 매크로 텍스쳐 크기를 산정하고 분석하였다. 밀입도, 배수성, SMA, 기층 포장에 대한 프로파일을 측정하여 포장에 사용된 골재에 의한 매크로 텍스쳐 크기를 분석하였으며, 재료분리가 일어난 지역의 프로파일을 측정하여 매크로 텍스쳐 깊이를 분석하였다. 본 연구 결과 프로파일 분석을 통하여 효과적으로 매크로 텍스쳐 크기를 산정할 수 있었으며, 아스팔트 혼합물 종류별로 텍스쳐 크기를 분석할 수 있었다. 또한, 매크로 텍스쳐 크기를 산정하여 분석함으로써 재료분리가 일어난 지역을 탐지할 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.338-340
• /
• 2009

The asphalt pavement is usually non-uniform since achieving a non-segregated and homogeneous asphalt mixture is very difficult. The segregation can occur in the mixed material before it is fed onto the road and it become segregated as it is being placed onto the road surface. Note that this segregation determines the performance of the asphalt pavement. Hence, it is necessary to check the segregation by estimating the density of the asphalt pavement in the field. In this paper, a research on estimating the density of the asphalt mixture by measuring the dielectric constant of the material is conducted. An RF transceiver and an antenna are designed and tested to a series of asphalt density samples, and discussions are shown.

• 한국도로학회논문집
• /
• 제20권1호
• /
• pp.69-76
• /
• 2018

PURPOSES : This study determined the optimal usage rate of RAP (reclaimed asphalt pavement) using cold central-plant recycling (CCPR) on a road-surface layer. In addition, a mixture-aggregate gradation design and a curing method based on the proposed rate for the surface-layer mix design were proposed. METHODS : First, current research trends were investigated by analyzing the optimum moisture content, mix design, and quality standards for surface layers in Korea and abroad. To analyze the aggregate characteristics of the RAP, its aggregate-size characteristics were analyzed through the combustion asphalt content test and the aggregate sieve analysis test. Moreover, aggregate-segregation experiments were performed to examine the possibility of RAP aggregate segregation from field compaction and vehicle traffic. After confirming the RAP quality standards, coarse aggregate and fine aggregate, aggregate-gradation design and quality tests were conducted for mixtures with 40% and 50% RAP usage. The optimum moisture content of the surface-layer mixture containing RAP was tested, as was the evapotranspiration effect on the surface-layer mixture of the optimum moisture content. RESULTS : After analyzing the RAP recycled aggregate size and extraction aggregate size, 13-8mm aggregate was found to be mostly 8mm aggregate after combustion. After using surface-chipping and mixing methods to examine the possibility of RAP aggregate segregation, it was found that the mixing method contributed very little for 3.32%, and because the surface-chipping method applied compaction energy directly as the maximum assumption the separation ratio was 15.46%. However, the composite aggregate gradation did not change. Using a 40% RAP aggregate rate on the surface-layer mixture for cold central-plant recycling satisfied the Abroad quality standard. The optimum moisture content of the surface-layer mixture was found to be 7.9% using the modified Marshall compaction test. It was found that the mixture was over 90% cured after curing at $60^{\circ}C$ for two days. CONCLUSIONS : To use the cold central-plant recycling mixture on a road-surface layer, a mixture-aggregate gradation design was proposed as the RAP recycled aggregate size without considering aggregate segregation, and the RAP optimal usage rate was 40%. In addition, the modified Marshall compaction test was used to determine the optimum moisture content as a mix-design parameter, and the curing method was adapted using the method recommended by Asphalt Recycling & Reclaiming Association (ARRA).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.406-411
• /
• 2005

The Cement-Asphalt Mortar is a mixture of cement and asphalt emulsion, and is utilized as a grouting material for the railway track which is used to fill under-slab space so as to provide a stabilized track support and a tool for adjustment of track level. In addition, the cement-asphalt mortar is unique in that it can provide more resiliency to the track so that one can expect the impact mitigation. To develop the cement-asphalt mortar suitable for the requirements for track grouting material, this study have selected several mixture proportions which can satisfy those requirements and minimize the material segregation, and the properties of those mixtures, such as flowability(flow time), strength and the resistance to freezing-thawing have been tested. According to the test results, the cement-asphalt mortar well satisfies the requirements and it is found that the properties of the cement-asphalt mortar is suitable for the application to the railway track.

• 한국도로학회논문집
• /
• 제9권4호
• /
• pp.135-147
• /
• 2007

아스팔트 포장에서의 골재분리(segregation)는 혼합물 내의 굵은골재와 잔골재가 고르게 분포하지 않은 결과이며, 균열, 레블링(raveling), 박리(stripping)와 같은 조기 파손을 야기한다. 그러나 소성변형에 대한 골재분리의 효과는 아직까지 제대로 규명되지 못하고 있다. 본 연구에서 수행된 실험 및 분석 결과, 아스팔트 포장의 소성변형은 혼합물의 골재분리보다는 혼합물 내의 골재 구조에 더 큰 영향을 받음을 알 수 있었다. 또한 굵은골재의 체적이 증가함에 따라 혼합물의 소성변형 저항성은 증가하였다. 그러나 이러한 현상은 낮은 공극율을 갖는 혼합물에서는 잘 일치하였지만, 높은 공극율을 갖는 혼합물에서는 골재의 체적 증가 보다는 공극율 자체가 소성변형에 더 큰 영향을 줌을 알 수 있었다. 즉, 공극율 10%를 기준으로, 이를 초과하는 혼합물은 굵은 골재의 체적이 큼에도 불구하고 소성변형 저항성은 크게 감소함을 알 수 있었다.