• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.6
• /
• pp.569-580
• /
• 2005

The present study investigates the convective heat/mass transfer characteristics in wavy ducts of a primary surface heat exchanger. The effects of duct aspect ratio and flow velocity on the heat/mass transfer are investigated. Local heat/mass transfer coefficients on the corrugated duct sidewall are determined using a naphthalene sublimation technique. The aspect ratios of the wavy duct are 7.3, 4.7 and 1.8 with the corrugation angle of $145\Omega$. The Reynolds numbers, based on the duct hydraulic diameter, vary from 300 to 3,000. The results show that at the low Re(Re $\leq$ 1000) the secondary vortices called Taylor-Gortler vortices perpendicular to the main flow direction are generated due to effect of duct curvature. By these secondary vortices, non-uniform heat/mass transfer coefficients distributions appear. As the aspect ratio decreases, the number of cells formed by secondary vortices are reduced and secondary vortices and comer vortices mix due to decreased aspect ratio at Re$\leq$1000. At Re >1000, the effects of corner vortices become stronger. The average Sh for the aspect ratio of 7.3 and 4.7 are almost same. But at the small aspect ratio of 1.8, the average Sh decreases due to decreased aspect ratio. More pumping power (pressure loss) is required for the larger aspect ratio due to the higher flow instability.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.178-183
• /
• 2008

The purpose of this study is to compare the effect on the thermal stratification under various aspect ratios in the solar storage tank using FLUENT. Numerical calculations of three designs with different aspect ratio were carried out to show the behaviour of stratification in a solar storage tank. The calculation results show that the thermal stratification of the 2.5:1 aspect ratio solar storage tank can be 6.22% higher then that of the 1.5:1 aspect ratio solar storage tank and 2.68% higher then that of the 2:1 aspect ratio solar storage tank.

• Korean Journal of English Language and Linguistics
• /
• v.1 no.2
• /
• pp.295-309
• /
• 2001

The simple forms in English have mostly been investigated in terms of tense, especially by those who do not distinguish between tense and aspect in English. However, we often find some usages of the simple forms that do not seem to fit in any of the meanings of tense. The purpose of this paper is to find aspectual meanings out of the simple present and past forms by re-analyzing their meanings in terms of aspect. It turns out that they represent the perfective aspect seeing a situation as a whole with no beginning. middle and end. As for the controversial stative situations in the simple forms, they have been proven to show the perfective aspect, too, if we agree to see both the part and whole in state as having the same features. And syntactic evidences from the simple forms and their corresponding progressive forms compared also show that the habitual dynamic situations represent the same aspect in the simple forms.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.105-111
• /
• 2000

A numerical study has been performed to obtain the heat transfer and pressure drop characteristics for shell-and-tube heat exchanger with various shapes of tubes. The Tubes have variation of Aspect Ratio, Pitch and Rotation. Results are presented as plots of Colburn j factor and friction factor f against Aspect Ratio, Pitch and Rotation. As Aspect Ratio increases, j factor and f factor decreases. As Pitch increases, j factor decreases. j/f have optimized Pitch for each Aspect Ratio. Accordingly, there is fitness of Aspect Ratio and Pitch fur most effective cases. The Rotation of tubes are of no meaning for both heat transfer and pressure drop.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.6
• /
• pp.2576-2590
• /
• 2020

The fundamental reason why most SQL injection detection methods are difficult to use in practice is the low reusability of the implementation code. This paper presents a reusable SQL injection detection method for Java Web applications based on AOP (Aspect-Oriented Programming) and dynamic taint analysis, which encapsulates the dynamic taint analysis processes into different aspects and establishes aspect library to realize the large-grained reuse of the code for detecting SQL injection attacks. A metamodel of aspect library is proposed, and a management tool for the aspect library is implemented. Experiments show that this method can effectively detect 7 known types of SQL injection attack such as tautologies, logically incorrect queries, union query, piggy-backed queries, stored procedures, inference query, alternate encodings and so on, and support the large-grained reuse of the code for detecting SQL injection attacks.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.59-65
• /
• 1999

This study is to analyze turbulent flow over a backward-facing step in a rectangular duct. The side wall effects on the internal flow were determined by varying the aspect ratio(defined as the step span-to-height ratio) from 1 to 20. In the flow behind a backward-facing step, separation, recirculation and redeveloping is occurred frequently. These phenomena appear in a particular variation by varying the aspect ratio. The results show that the aspect ratio has an influence on the velocity and reattachment length. When the AR is increased, the reattachment length is increased. For 6 over aspect ration, the rate of increase is decreased. The length of recirculation in the upper corner is increased, as the increase of aspect ration. It's width is not changed in the variation of aspect ration. The transverse, streamwise and spanwise velocities were decreased along the flow down stream of the step.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.717-722
• /
• 2003

The aspect ratio is the main parameter which governs the outer flow pattern and nozzle performance. And in this study, some flow characteristics with the variation of nozzle aspect ratios such as mean pressure distributions along the center line of the outer flow, flow coefficients and the diffusion angles have been experimentally investigated. Through the experimental analysis, the higher aspect ratio was known to decrease the jet kinetic energy because of the friction losses at the outer of nozzle. As the result, it is found that the nozzle performance depends mainly on the aspect ratio of nozzle.

• Journal of Mechanical Science and Technology
• /
• v.15 no.1
• /
• pp.35-43
• /
• 2001

Both tensile and tear properties of short-fiber reinforced Chloroprene rubber have been studied as functions of the fiber aspect ratio and fiber content. Both properties increased when both the fiber aspect ratio and fiber content were increased. The fiber reinforced rubbers exhibited maximum values of these properties at a fiber aspect ratio of about 300. When the fiber aspect ratio exceeds 400, the mechanical properties decreased with the fiber content because of the non-uniform dispersion of fibers. The tensile modulus was compared with the prediction by the Halpin-Tsai equations for randomly oriented cases. A bonding agent was used in the fiber treating process. It was found that the ultimate tensile strength, torque, tearing energy and tensile modulus of the rubbers with treated fibers were much higher than those with untreated ones.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06c
• /
• pp.223-225
• /
• 2006

영역지향 프로그래밍(Aspect-Oriented Programming)은 소프트웨어의 성능을 향상시키고 유지보수에 많은 이점을 가지는 새로운 프로그래밍 방법론이다. 하지만 영역지향 프로그래밍 방법으로 소프트웨어를 개발하기 위해서는 Aspect를 지원하는 새로운 영역지향 프로그래밍 언어를 사용하거나 레거시 시스템에 Aspect를 적용할 경우에 소스코드의 재 컴파일등과 같은 문제점을 가지고 있다. 이에 본 논문에서는 레거시 시스템에 Aspect를 동적으로 결합할 수 있는 동적결합 메커니즘을 제안한다. 이를 위하여 Aspect의 행위와 결합 정보를 가지는 Connector를 생성하고, 생성된 Connector는 코어클래스의 위임자로서 역할을 수행하게 되는 동적결합 가능하게 하는 메커니즘을 제안한다.

• Journal of ILASS-Korea
• /
• v.8 no.4
• /
• pp.39-45
• /
• 2003

The Objective of this study is to investigate the effect of internal swiller angle and swirl chamber aspect ratio of nozzle on spray characteristics for application of spray system in micro fabrication process. The macro-spray characterictics such as the spray angle and breakup process were obtained by photographs illustrating atomization. The micro-spray characteristics such as droplet size and axial velocity were measured by using PDA with swirler angle and swirl chamber aspect ratio. The swiller angles were $13.5^{\circ},\;27^{\circ},\;and\;40.5^{\circ}$. The swirl chamber aspect ratios were 1.2, 1.6, and 2.0. It was found that the smaller swirl chamber aspect ratio was, the larger axial velocity and drop size were.