• 한국안전학회지
• /
• 제29권6호
• /
• pp.137-143
• /
• 2014

Asbestos is given to a variety of six naturally occurring silicate minerals. These minerals possess high tensile strength, flexibility, resistance to chemical and thermal degradation, and electrical resistance. These minerals have been used for decades in thousands of commercial products, such as insulation and fireproofing materials, automotive brakes, textile products, cement and wallboard materials. When handled, asbestos can separate into microscopic-size particles that remain in the air and are easily inhaled. It is now known that prolonged inhalation of asbestos fibers can cause serious and fatal illnesses including malignant lung cancer, mesothelioma, and asbestosis. Therefore the use of asbestos and asbestos products has dramatically decreased in recent years. Also all constructions including asbestos should be removed under strictly controlled conditions and very tightly implemented health & safety management systems. In this study, the process of the removal work of the asbestos cement slate was analyzed by IDEF-0 modeling and evaluated by 4M risk assessment method. The results show that removal work of the asbestos cement slate was classified five process and eighteen detail process. The risk of safety side the higher than the risk of health side in 4M risk assessment.

• 한국산업보건학회지
• /
• 제21권4호
• /
• pp.201-208
• /
• 2011

Objectives: According to the compliance of the asbestos-related regulation, every building has to be inspected for asbestos presence before its abatement work. This study was performed for identifying the types and contents of asbestos in building bulk samples. Materials and Methods: Bulk samples were collected during the asbestos inspection in 2010. We grouped the bulk samples into the regulated asbestos containing materials(RACM), presumed asbestos containing materials(PACM), and construction products. Additionally, the types of asbestos in all bulk samples were identified by polarization microscopy(PLM). Results: The RACMs were from building, house, pipe and facility. The RACMs were found mainly building (72.1%) and house (93.7%). The contents of chrysotile in building, house and facility were 66.9% (1-90%), 89.7% (2-90%) and 11.0% (2-90%), respectively. PACMs were surfacing material, thermal system insulation (TSI), and miscellaneous material. The miscellaneous materials that showed a high detection rate (79.2%) were ceiling, roofing and wall materials. Among them, the roofing materials had high chrysotile content(9.7%, 2-21%), followed by wall (8.7%, 2-21%) and ceiling (3.4%, 1-17%). In the construction products, asbestos was found mainly in slate (92.6%, 2-21%), including chrysotile. The slate had high asbestos content (9.7%, 2-21%), followed by cement flat board (8.7%, 2-19%) and textile (3.4%, 1-17%) Conclusions: Utilizing these results, it would be contributed to construct a useful ACM database and prevent from asbestos exposure to workers in the asbestos abatement and maintenance works.

• 한국산업보건학회지
• /
• 제8권2호
• /
• pp.242-253
• /
• 1998

우리나라에서 석면생산은 약 60년 전 부터 시작되었으며 총 생산량은 약 145,000톤이었다. 이들의 대부분은 백석면이었으며 일부 토면과 산피(Sepiolite)였다. 충남 광천지방의 석면광산은 백석면이고 홍성지방의 석면은 토면이었다. 석면의 사용은 슬레이트 생산으로부터 시작하였으며, 일제시대부터 약 55년, 석면방직과 석면마찰제 생산이 27년 전부터 시작되었다. 석면의 수입량은 1976년부터 1995년까지 약 122만 톤이 수입되었으나 1976년 이전의 수입량까지 포함한다면 이보다 많을 것으로 판단된다. 석면의 수입은 급격한 증가가 없이 꾸준히 증가하는 추세이며 년간 약 8만9천 톤이 수입된다. 이들의 대부분은 석면건축자재인 슬레이트, 석면판 등의 생산과 석면마찰제의 생산에 사용되고 있다. 석면의 노출농도는 꾸준히 감소하고 있으나 일부 근로자에서는 석면관련 질환의 발생이 염려되는 수준이었다. 석면방직업의 경우 1987년 최고 45.7 fibers/cc까지 달하였으나 1984년 6.7 fibers/cc이었으며, 96년 석면방직업에서 1.87 fibers/cc으로 감소하고 있으나 허용기준을 초과하고 있었다. 브레이크라이닝 제조 사업장에서는 1984년 1.70 fibers/cc, 1966년에는 0.55 fibers/cc로 감소하고 있으나 극히 일부의 근로자에서는 허용기준을 초과하고 있었다. 따라서 석면관련 질환의 발생은 석면방직업과 석면마찰제 사업장에 국한될 것으로 보인다. 석면사업장은 1993년 118개이며 총 취급근로자 수는 6,636명이었을 것으로 추산되었다. 사업장수와 취급근로자수의 증가가 둔화되었다고는 하나 꾸준히 증가하고 있다. 이중 10년 이상 근무한 근로자는 1,860명이며 20년 이상 근무한 근로자도 561명에 달하고 있어 건강장해가 발생하기에 충분하다고 판단된다. 따라서 폐암이나 중피종암 등이 밝혀지지 않은 것이지 없는 것은 아닐 것으로 추측되었다.

• 한국대기환경학회지
• /
• 제23권6호
• /
• pp.718-726
• /
• 2007

There are many varieties of asbestos: chrysotile, crocidolite, amosite, tremolite, actinolite, and anthophylite. These are widely used in construction materials, brake lining, textile, and so on. Even though non-asbestos fibers such as glassfiber and rockwool have manufactured because asbestos causes asbestosis, lung cancer, mesothelioma, etc., some bad effects of non-asbestos have been also reported. PCM (phase contrast microscopy) and PLM (polarized light microscopy) have been used to qualitatively analyze asbestoses. These techniques have serious drawbacks when identifying and separating various asbestoses. Recently scanning electron microscopy (SEM) equipped with energy dispersive X-ray analysis (EDX) has been known as an useful tool to analyze airborne particle since it provides physical and chemical information simultaneously. The purpose of the study was to classify both asbestos and non-asbestos fibers and finally to develop their source profiles by using the SEM/EDX. The source profiles characterized by 6 different types of asbestos fibers and 2 types of non-asbestos fibers had been developed by analyzing a total of 380 fibers. Analytical parameters used in this study were length, width, aspect ratio, and shape as physical information, and Na, Mg, Al, Si, K, Ca, Cr, Mn, Fe, and Cu as chemical information. All the parameters were intensively reviewed.

• 한국산업보건학회지
• /
• 제19권1호
• /
• pp.8-15
• /
• 2009

This study was examined to find out asbestos exposure level the factors which affected the level at asbestos abatement sites. We visited a total of thirteen building demolition sites(3 apartments, 3 schools, 4 stores, and 3 houses) were visited to collect samples and related data from August to November, 2006. The results of this study were as follows 1. The results of an analysis of bulk samples to identify types of asbestos at the asbestos abatement sites showed that the kinds of the asbestos detected were chrysotile by 50.0%, were tremolite by 2.6%, and were the contents of chrysotile by 3 to 20%. 2. The geometric mean concentration of asbestos was 0.007 f/cc(range 0.001-0.34 f/cc) and its geometric standard deviation was 5.83. Of the samples, however, 12 exceeded the Korean Occupational Exposure Limit(0.1f/cc). 3. Of the materials, textile material had the highest concentration with geometric mean of 0.016 f/cc. When asbestos-containing materials were removed using T type tools, the geometric mean concentration of asbestos was 0.061 f/cc. The level by this method was much higher than by other removal methods. In analysis by the type of building, the geometric mean concentration of asbestos in stores was 0.042 f/cc and was higher than in other buildings. 4. The Poisson regression analysis was applied to find out the factors that affect the airborne asbestos concentration. As a result of the analysis, removal using a T type tool was the most important factor affecting the asbestos concentration(p<0.01). In conclusion, the airborne asbestos concentration(geometric mean) in asbestos abatement sites was 0.007 f/cc(0.001~0.34 f/cc), and 12(14.6%) of all samples were over the 0.1 f/cc. These results showed that asbestos abatement workers have been exposed to the high level of airborne asbestos because they have not been keeping asbestos removal rule. In accordance with increases of the number of building demolition sites, the better government regulation on asbestos abatement methods should be made and be performed well at building demolition sites.

• Tuberculosis and Respiratory Diseases
• /
• 제41권6호
• /
• pp.651-657
• /
• 1994

저자들은 최근 석면분진에 11년간 폭로된 직업력이 있으며 작업중단 5년후 약3개월간의 호흡곤란을 주소로 입원하여 흉부X-선, 폐기능검사, 전산화단층촬영, 기관지경검사 및 석면소체검사, Gallium scan을 통하여 석면폐증, 늑막삼출액과 폐암으로 진단된 1예를 경험하였기에 문헌조사와 함께 이를 보고하는 바이다.