Browse > Article
http://dx.doi.org/10.14346/JKOSOS.2014.29.6.137

A Study on the Process Analysis and the Risk Assessment for Removal Work of the Asbestos Cement Slate  

Oh, Hyunsoo (Department of Safety Engineering, Pukyong National University)
Kim, Jeong-Min (MyungSung Engineering & Construction)
Chang, Seong Rok (Department of Safety Engineering, Pukyong National University)
Publication Information
Journal of the Korean Society of Safety / v.29, no.6, 2014 , pp. 137-143 More about this Journal
Abstract
Asbestos is given to a variety of six naturally occurring silicate minerals. These minerals possess high tensile strength, flexibility, resistance to chemical and thermal degradation, and electrical resistance. These minerals have been used for decades in thousands of commercial products, such as insulation and fireproofing materials, automotive brakes, textile products, cement and wallboard materials. When handled, asbestos can separate into microscopic-size particles that remain in the air and are easily inhaled. It is now known that prolonged inhalation of asbestos fibers can cause serious and fatal illnesses including malignant lung cancer, mesothelioma, and asbestosis. Therefore the use of asbestos and asbestos products has dramatically decreased in recent years. Also all constructions including asbestos should be removed under strictly controlled conditions and very tightly implemented health & safety management systems. In this study, the process of the removal work of the asbestos cement slate was analyzed by IDEF-0 modeling and evaluated by 4M risk assessment method. The results show that removal work of the asbestos cement slate was classified five process and eighteen detail process. The risk of safety side the higher than the risk of health side in 4M risk assessment.
Keywords
asbestos cement slate; risk assessment; process analysis; 4M; IDEF0;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 J. M. Koo, "Removal and Process of Asbestos at Construction Site in Korea, Korean Recycled Construction Resource Institute, Vol. 4, No. 1, pp. 43-48, 2009.   과학기술학회마을
2 Korea Asbestos Management Association, "The Asbestos", Dong Hwa Technology Publishing, 2012.
3 J. W. Jeong, "Asbestos Exposure and Risk Assessment in Busan", Graduate School Thesis, Pusan National University, 2013.
4 H. W. Kim, S. C. Lee and H. J. Lim, "The Problem with Asbestos Removal and the Overview of used Asbestos in the Building of Korea", Korean Industrial Health Association, No. 229, pp. 31-33, 2007.
5 Occupational Safety and Health Research Institute, "Practical Reasonability for Introducing Separate Contract Award System Concerning Asbestos Removal", 2010.
6 Ministry of Employment and Labor, "Occupation Safety and Health Act".
7 Occupational Safety and Health Research Institute, "The Study on Asbestos Exposure of Workers in Asbestos-containing Waste Industry", 2010.
8 Y. J. Jo, "A Study on the Airborne Asbestos Concentration and Health Management Status of the Asbestos Abatement and Removal Working Area", Graduate School Thesis, Korea University, 2013.
9 J. Y. Kim, "Exposure Level to Airborne Asbestos Fibers and the Effecting Factors at Building Demolition sites", Graduate School Thesis, Daegu Haany University, 2008.
10 J. Y. Kim, S. K. Lee, J. H. Lee, M. H. Lim, S. W. Kang and Y. G. Phee, "A Study on the Factors Affecting Asbestos Exposure Level from Asbestos Abatement in Building Demolition Sites", Journal of the Korea Industrial Hygiene Association, Vol. 19, No. 1, pp.8-15, 2009.   과학기술학회마을
11 R. Y. Jeon, Y. S. Yu and C. S. Lee, "The Checklist & Manual Development for Safe Dismantling of Asbestos Building Materials", Journal of Architectural Institute of Korea, Vol. 29, No. 7, pp.117-124, 2013.
12 C. G. Choi, "Exposure Evaluation of Releasing Asbestos during Building Destruction Work", Graduate School Thesis, Yonsei University, 2001.
13 J. I. Park, "A Review on Exposure Levels of Asbestos and Working Environment Improvement during Building Destruction Work", Graduate School Thesis, Pusan National University, 2010.
14 C. G. Choi, C. N. Kim, N. G. Lim, Y. M. Roh and J. H. Roh, "Exposure Level of Releasing Asbestos during Building Destruction Work", Journal of the Korea Industrial Hygiene Association, Vol. 12, No. 13, pp.195-201, 2002.
15 G. J. Ha and J. H. Ha, "A Study on the Improvement of System and Policy for Revitalization Asbestos Demolition Industry", Conference of Regional Association of Architectural Institute of Korea, pp.27-28, 2011.
16 A. Y. Lee, "Factors Affecting the Management of the Asbestos Removal Work", Graduate School Thesis, Yonsei University, 2013.
17 K. S. Son, J. T. Park and W. M. Gal, "Making Formular to calculate Reasonable Unit Cost for Asbestos Removal", Journal of Korea Safety Management & Science, Vol. 13, No. 3, pp.55-61, 2011.   과학기술학회마을
18 T. H. Song, "Study on the Cost Estimate of asbestos in Demolition Works", Conference of Architectural Institute of Korea, 2009.
19 K. S. Son, W. M. Gal and H. S. Kim, "Practical Reasonability for Introducing Separate Contract Award System Concerning Asbestos Removal", Journal of Korea Safety Management & Science, Vol. 13, No. 2, pp.259-266, 2011.   과학기술학회마을
20 D. I. Kim and S. H. Shim, "A Study of Asbestos Dismantlement & Removal Companies' Awareness and Attitude towards Law Observance", Indoor Environment and Technology, Vol. 6, No. 3, pp.200-211, 2009.
21 Y. C. Shin, B. H. Son and W. H. Hong, "A Analytic Study on the Management System of the Waste Asbestos when Dismantling Buildings", Conference of Regional Association of Architectural Institute of Korea, pp.946-949, 2007.
22 W. S. Huh, "Design and Analysis of System", Hanbit Media, pp.213-216, 2008.
23 V. Bosilj-Vuksic, G. M. Giaglis, V. Hlupic, "IDEF Diagrams and Petri Nets for Business Process Modeling: Suitability, Efficacy and Complementary Use", Proc. International Conference on Enterprise Information Systems(IECIS 2000), pp.242-247. 2000.
24 H. S. Oh, "Development of Mobile Application for On-site Safety Management in the Shipbuilding Industry", Graduate School Thesis, Pukyong National University, 2013.
25 National Institute of Standards and Technology, "Integration Definition for Function Modeling (IDEF0)", Federal Information Processing Standards Publication 183, 1993.
26 C. Badica, A. Badica and V. Litoiu, "A New Formal IDEF-based Modelling of Business Processes", Proceedings of the 1st Balkan Conference Informatics, pp.535-549, 2003.
27 Korea Occupational Safety & Health Agency, "Technic Guideline of 4M Risk Assessment", KOSHA GUIDE X-14-2012.