• 한국산업보건학회지
• /
• 제30권1호
• /
• pp.28-38
• /
• 2020

Objectives: The purpose of this study is to identify the perceived problems of and suggest improvement measures for asbestos abatement companies in support of asbestos-related systems and policies. Methods: For this study a questionnaire was prepared consisting of current work (two questions), the contribution and necessity of a risk assessment system for asbestos abatement (two questions), and problems with and improvement measures for systems and policies (nine questions). The questionnaires were sent to 2,170 asbestos abatement companies and were returned by 83 companies (return rate = 3.8%). We conducted frequency analysis, ANOVA, and a Chi-squared test at the 5% significance level. Results: Asbestos abatement companies expressed difficulties with complying with wet work (43% of unenrolled managers), negative pressure enclosure (36% of all respondents), and installation and use of decontamination units (26% of all respondents) as stipulated in the relevant regulations. In addition, 43% of the respondents expressed concerns that the expertise of the company was not considered during bidding for asbestos abatement and hoped that an advantage (e.g., bid point) would be given to the upper grades for asbestos risk assessment (38%). Asbestos abatement companies generally rented and used negative pressure devices (including negative pressure recording devices) and suggested that periodic calibration (32%) is needed to ensure the performance of the rented equipment. Finally, the respondents asked for clear definitions for three situations specified in the Occupational Safety and Health Acts: (1) temporarily leaving the asbestos abatement workplace; (2) tasks with less airborne asbestos; and (3) physically breaking or cutting using a machine. Conclusions: The problems and improvement measures identified in this study of asbestos abatement companies can be utilized as fundamental information for the improvement of the systems and policies for safe asbestos abatement.

• 한국의류산업학회지
• /
• 제2권5호
• /
• pp.411-415
• /
• 2000

To be able to work safely and efficiency, the Threshold Limit Values (TLV) for work in the heat are widely used. Since these TLV are only applicable to workers in regular clothing, TLV should be adjusted when applied to the asbestos removal workers who wear extra impermeable protective clothing. Although abbreviated guidelines for heat stress exposure have been proposed, literature advocating their use in the asbestos removal industry is limited. Therefore, we planed a survey to evaluate the workload of asbestos abatement workers in summer, and an experiment with climatic chambers to evaluate the effects of resting in a cool environment between work periods. From these studies, we got following conclusions. There is a high risk of suffering from heat illness by asbestos abatement work in summer in Japan. It is proposed to create a cool room inside the workplace of asbestos abatement work to reduce thermal stress.

• 한국산업보건학회지
• /
• 제19권1호
• /
• pp.8-15
• /
• 2009

This study was examined to find out asbestos exposure level the factors which affected the level at asbestos abatement sites. We visited a total of thirteen building demolition sites(3 apartments, 3 schools, 4 stores, and 3 houses) were visited to collect samples and related data from August to November, 2006. The results of this study were as follows 1. The results of an analysis of bulk samples to identify types of asbestos at the asbestos abatement sites showed that the kinds of the asbestos detected were chrysotile by 50.0%, were tremolite by 2.6%, and were the contents of chrysotile by 3 to 20%. 2. The geometric mean concentration of asbestos was 0.007 f/cc(range 0.001-0.34 f/cc) and its geometric standard deviation was 5.83. Of the samples, however, 12 exceeded the Korean Occupational Exposure Limit(0.1f/cc). 3. Of the materials, textile material had the highest concentration with geometric mean of 0.016 f/cc. When asbestos-containing materials were removed using T type tools, the geometric mean concentration of asbestos was 0.061 f/cc. The level by this method was much higher than by other removal methods. In analysis by the type of building, the geometric mean concentration of asbestos in stores was 0.042 f/cc and was higher than in other buildings. 4. The Poisson regression analysis was applied to find out the factors that affect the airborne asbestos concentration. As a result of the analysis, removal using a T type tool was the most important factor affecting the asbestos concentration(p<0.01). In conclusion, the airborne asbestos concentration(geometric mean) in asbestos abatement sites was 0.007 f/cc(0.001~0.34 f/cc), and 12(14.6%) of all samples were over the 0.1 f/cc. These results showed that asbestos abatement workers have been exposed to the high level of airborne asbestos because they have not been keeping asbestos removal rule. In accordance with increases of the number of building demolition sites, the better government regulation on asbestos abatement methods should be made and be performed well at building demolition sites.

• 한국산업보건학회지
• /
• 제30권2호
• /
• pp.205-212
• /
• 2020

Objectives: The purpose of this study was to identify the needs and improvement measures of the risk assessment system through a survey of asbestos abatement companies. Methods: This study prepared a questionnaire that includes improvement measures for the risk assessment system(six questions) and the necessity of a risk assessment system for asbestos abatement(one question). The questionnaire was sent to 2,170 asbestos abatement companies and returned by 83 companies(return rate = 3.8%). We conducted frequency analysis, ANOVA, and Chi-squared testing at the 5% significance level. Results: This study analyzed the survey results and identified six main opinions on the risk assessment system and improvement measures. First, giving an advantage to companies with a high grade(S and A grades) in public bidding and/or qualification screening showed a similar preference(agree: 50.6%, disagree: 49.4%). Second, 57.6% of the respondents wanted to allow air showers along with water showers for low risk asbestos work. However, 23.2% of the respondents asserted that only a water shower should be allowed since there is no scientific evidence supporting the removal of asbestos by air shower. Third, in order to prevent missing the enrollment of workers, simply submitting a change report should be allowed when any worker is changed (40.0%). Fourth, 43% of the respondents answered that they did not know how to calculate the proper number of negative pressure units. The reasons given were a lack of guidelines or standards(38.9%), inconvenience (36.1%), and absence of education(25%). Fifth, the respondents who were favorable toward the necessity of a risk assessment system gave higher scores compared to unfavorable respondents on the necessity of the management of workers' work history(favorable respondent = 3.96 out of 5, unfavorable respondent = 2.68) and the necessity of professional training for workers(favorable respondent = 3.71, unfavorable respondent = 2.56). Finally, the respondents favorable toward a risk assessment system showed higher scores on the awareness of calculating the proper number of negative pressure units(4.79) compared to unfavorable respondents(3.3). Conclusions: The opinions of asbestos abatement companies identified through the survey in this study can be usefully utilized as fundamental information to improve the risk assessment system.

• 상하수도학회지
• /
• 제28권3호
• /
• pp.325-337
• /
• 2014

The research on the actual condition of indoor asbestos concentration in Korea has not been thoroughly accomplished up to now. In this research the ratio of asbestos-containing buildings and indoor asbestos concentration was studied. This investigation was conducted in 2012 and 2013 and buildings were categorized based on region, building type by use, existing space(ground or basement), and construction year, respectively. Also the indoor asbestos concentration change was monitored to evaluation the efficiencies of two types of asbestos-concentration abatement devices. As a result, the ratio of asbestos-containing buildings in Seoul was largely decreased. The ratio of asbestos-containing buildings was higher in hospitals and schools regionally and in ground buildings than in basement. The average indoor asbestos concentrations were 0.0011, 0.0008 piece/cc in 2012 and 2013 investigation, respectively. Those values were much lower than standards(0.01 piece/cc), therefore the threat of indoor asbestos concentration might be negligible. In asbestos-concentration abatement experiments, the circulation velocity of ventilator were changed 2-6.7 m/sec. With 6.7 m/sec of velocity of ventilator, the concentration of indoor asbestos was fluctuated and maximum value was 2.4 piece/cc. With 4.5 and 2 m/sec of velocities of ventilator, the maximum concentration of indoor asbestos was fluctuated and maximum value was 0.9 piece/cc. This indicated that the concentration of indoor asbestos was decreased partly due to the free drop of asbestos. From these results, the proper velocity of ventilator seems to be between 4.7 and 6.5m/sec under this circumstance and further research is required. These research results may be used to guideline of asbestos management policy.

• 한국산업보건학회지
• /
• 제21권4호
• /
• pp.201-208
• /
• 2011

Objectives: According to the compliance of the asbestos-related regulation, every building has to be inspected for asbestos presence before its abatement work. This study was performed for identifying the types and contents of asbestos in building bulk samples. Materials and Methods: Bulk samples were collected during the asbestos inspection in 2010. We grouped the bulk samples into the regulated asbestos containing materials(RACM), presumed asbestos containing materials(PACM), and construction products. Additionally, the types of asbestos in all bulk samples were identified by polarization microscopy(PLM). Results: The RACMs were from building, house, pipe and facility. The RACMs were found mainly building (72.1%) and house (93.7%). The contents of chrysotile in building, house and facility were 66.9% (1-90%), 89.7% (2-90%) and 11.0% (2-90%), respectively. PACMs were surfacing material, thermal system insulation (TSI), and miscellaneous material. The miscellaneous materials that showed a high detection rate (79.2%) were ceiling, roofing and wall materials. Among them, the roofing materials had high chrysotile content(9.7%, 2-21%), followed by wall (8.7%, 2-21%) and ceiling (3.4%, 1-17%). In the construction products, asbestos was found mainly in slate (92.6%, 2-21%), including chrysotile. The slate had high asbestos content (9.7%, 2-21%), followed by cement flat board (8.7%, 2-19%) and textile (3.4%, 1-17%) Conclusions: Utilizing these results, it would be contributed to construct a useful ACM database and prevent from asbestos exposure to workers in the asbestos abatement and maintenance works.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2007년도 춘계학술논문발표회 논문집
• /
• pp.37-50
• /
• 2007

• 대한환경공학회지
• /
• 제34권5호
• /
• pp.345-350
• /
• 2012

충북의 D-석면광산 인근지역에서 석면이 포함된 토양으로 부터 대기 중으로 비산되는 석면조사와 주민들의 일상생활이나 토양을 경작하는 농업활동 등의 석면노출이 가능한 주요활동에 대한 인체 위해도를 평가하여, 지역주민의 건강 위해성을 미연에 방지하는 대책을 수립하고자 본 연구를 수행하여 다음과 같은 결론을 얻었다. 첫째, 대기 중 석면 모니터링을 위해 바람의 방향을 고려하여 지역주민의 거주지 근처에 시료채취지점을 선정하였다. 이를 위상차현미경으로 분석한 결과, 20개 지점 중에서 12개 지점은 검출한계 이하이고, 8개 지점도 0.0025~0.0029 f/cc 범위로 석면안전관리법의 공기질 관리기준 0.01 f/cc 보다 매우 낮은 수준이었다. 또한 투과전자현미경으로 이 섬유상 물질을 분석한 결과도 석면이 아니거나 검출한계 이하로 나타났다. 일반 대기 중 석면의 악영향은 거의 없는 것으로 추정된다. 둘째, 현장조사와 지역주민의 설문조사를 토대로 활동근 거시료채취 시나리오를 현지 실정에 맞게 설정하였으며, 그 중에서 예초기 작업과 흙파기, 마당쓸기 시나리오의 경우에 위해도의 95% 신뢰상한치가 석면에 대한 활동별 초과생애발암위해도의 허용치 $1{\times}10^{-4}$을 초과하는 것으로 나타났다. 토양 교란활동이 수반되는 농경활동에는 토양에 함유된 석면섬유상 물질이 많이 비산되는 것으로 판단되며, 지역주민의 세심한 주의가 요구된다. 따라서 이에 대한 결과를 바탕으로 환경성 노출원을 가능하다면 원천적으로 차단하여 석면노출을 최소화하고, 지역주민들에게 석면노출 가능성이 있는 환경에 대해 널리 알림으로써 토양을 교란하여 석면이 비산되는 행위를 제한하는 등의 석면으로 인한 건강피해를 줄이는 체계적인 관리대책이 강구되어야 할 것이다.