• Korean journal of applied entomology
• /
• v.13 no.2 s.19
• /
• pp.93-97
• /
• 1974

This paper describes experiments made to develop a technique for marking insects and get the informations for ecological studies as a means of tagging flies with radioactive phosphorus, and also to learn the effect on the subsequent generation of flies. Tests were conducted with house flies, Musca domestica L. emerged front the larvae that had reared in a media containing various concentrations of P-32. Radioactivity of the flies was measured with end-window type $(2mg/cm^2)$ Geiger-Muller counter and proportional counter made by Aloka. In following the daily increases in counting rates by 6-day-old larvae it was apparent the larvae in the starting media containing the higher concentrations of P-32 were showing high counting rates. It was found that about 13.2 per cent of the radioactive material remained in the empty puparia after the flies emerged. Radioactivity of the emerged flies decreased gradually and the biological halflife of phosphorus-32 was approximately 6.14 days with considerable variation. A significant amount of P-32 were detected in the abdominal and thoracic sections as compared with other parts of adult. The activity of phosphorus·32 in eggs and larvae produced by adults reared in medium containing 0.2 microcurie or more of P-32 per gram were readily detected with Geiger-Mi·lier counter. On the other hand, the radioactivity of eggs and larvae produced by the treated males crossed with untreated normal females could be only detected in the medium containing more of 2.0 microcurie with G.M. counter. There was no apparent damage to the flies at dosages as high as 0.5 microcurie per gram of medium. For field studies a concentration of 0.5 microcurie of P-32 per gram of artificial medium appears to give adequate labeling for positive identification of flies and their egg masses.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.4
• /
• pp.275-280
• /
• 1999

In order to find optimum conditions for somatic embryogenesis from different individual (2-year-old) in Aralia elata were cultured on MS medium supplemented with 1.0 mg/L 2,4-D, 3% sucrose, and 0.3% gelrite. We also investigated the effect of MS medium salt concentration, BA and ABA on the embryo germination and plant regeneration. While noticeable difference was observed on somatic embryo induction among different individual tree, no apparent difference was seen in both germination and regeneration frequencies. Compared with nonembryogenic calli, embryogenic calli tended to look yellow and/or pale brown in color, slowly growing and soft in their texture. Regardless of BA or ABA treatment, half-strength MS salt medium proved to be better than full strength MS medium in both embryo germination and plant regeneration. Both hypocotyl and cotyledon developments were slightly promoted by adding 0.1 mg/L BA. However, its effect on germination and regeneration seemed inferior to control. ABA treatment on somatic embryos at their torpedo and early cotyledonary stages resulted in poor response in germination and regeneration. Although most regenerated plantlets varied greatly in cotyledon number and shape, they could be developed into normal plants after 4 weeks in culture. More than 95% plantlets were acclimatized in an artificial soil mixture, successfully transplanted to nursery bed and grew normally without any phenotypic abnormalty.

• Journal of Plant Biotechnology
• /
• v.30 no.1
• /
• pp.73-80
• /
• 2003

Useful Dianthus species were collected and selected from two native and seven foreign species distributed in Gangwon province. For in vitro breeding,. callus was induced from the explants of apical meristem, leaf, stem and the in vitro adventitious shoots on MS basal medium with 2.0 mg/L 2,4-D and 0.5 mg/L BA at 27$^{\circ}C$ under continuous light. After 3 weeks of culture, calli initiated the most highly from the leaf explants of D. chinensis Organogenic calli were able to be selected from the adventitious shoot-derived calli. For shoot regeneration, these organogenic calli were cultured on MS medium with the combination of 0.1 mg/L NAA＋1.0 mg/L BA under continuous light. Multiple shoots were proliferated with low frequency (about 30%) from those adventitious shootderived calli. Also, shoots initiated directly from the adventitious shoot explants without callus formation at high frequency of 52% when cultured on N6 medium containing 0.1 mg/L NAA and 1.0 mg/L BA in D. gratianopol. Multiple shoots and plantlets grew well and rooted on MS medium supplemented with 0.1 mg/L NAA. Regenerants with well-developed roots were transferred to 8-cm pots containing vermiculite at 85% relative humidity and 27$^{\circ}C$ These plantlets were acclimatized in artificial soil mixture and transferred to the greenhouse for flowering with normal phenotypes. M28 Mutant line was selected with white flowers from 0.03M EMS-treated organogenic calli derived from in vitro adventitious shoot explants of D. chinensis and set seeds.

• Korean Journal of Plant Resources
• /
• v.32 no.4
• /
• pp.290-295
• /
• 2019

This study was carried out to select the optimal condition for prothallus propagation and sporophyte formation of Leptogramma pozoi (Lag.) Ching subsp. mollissima (Fisch. ex Kunze) Nakaike and to provide basic data for mass production system. In the propagation, 300 mg of prothallus were inoculated in different kinds of medium [1/4, 1/2, Murashige and Skoog (MS), Knop], sucrose (0, 1, 2, 3, 4%), and cultured for 8 weeks. Sporophyte formation studies were carried out by inoculating blended prothallus into artificial soils. The soils were mixed with horticultural substrate, peatmoss, perlite, and decomposed granite at different ratios or only with the horticultural substrate. Then the prothallus was cultivated for 12 weeks to figure out the formation and growth of the sporophytes. The growth and development of prothalli were excellent on MS medium. According to medium components, prothallus growth was favorable in all treatments except 0% sucrose treatment and the highest in 2% sucrose. In the experiment of soil mixtures, sporophyte formation was the highest in the horticultural substrate:perlite 2:1 (v:v) and horticultural substrate:decomposed granite 2:1 (v:v) treatment, and the overall growth was good in the horticultural substrate:decomposed granite 2:1 (v:v) mixed soil.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.3
• /
• pp.160-171
• /
• 2021

Purpose. This in-vitro study evaluated and compared the color stability of 3D-printed and conventional heat-polymerized acrylic resins following aging, mechanical brushing, and immersion in staining medium. Materials and methods. Forty disc-shaped specimens (10 mm in diameter and 3 mm thick) were prepared from two 3D-printed [DentaBASE (DB) and Denture 3D+ (D3D)] and one conventional polymethylmethacrylate (PMMA) denture materials. The specimens were thermo-cycled, subjected to mechanical brushing, and were immersed in either coffee, lemon juice, coke, or artificial saliva (AS) to simulate one and two years of oral use. Color measurements of the specimens were recorded by a spectrophotometer at baseline (T0), and after one (T1) and two years (T2) of simulation. The color changes (ΔE) were determined and also quantified according to the National Bureau of Standards (NBS) units. Descriptive statistics, followed by factorial ANOVA and Bonferroni post-hoc test (α=.05), were applied for data analysis. Results. The independent factors, namely material, staining medium, and immersion time, and interaction among these factors significantly influenced ΔE (P<.009). Irrespective of the materials, treatments, and time, the highest and the lowest mean ΔEs were observed for PMMA in lemon juice (4.58 ± 1.30) and DB in AS (0.41 ± 0.18), respectively. Regarding the material type, PMMA demonstrated the highest mean ΔE (2.31 ± 1.37), followed by D3D (1.67 ± 0.66), and DB (0.85 ± 0.52), and the difference in ΔE between the materials were statistically significant (P<.001). All the specimens demonstrated a decreased color changes at T2 compared to T1, and this difference in mean ΔE was statistically significant (P<.001). Conclusion. The color changes of 3D-printed denture resins were low compared to conventional heat polymerized PMMA. All the tested materials, irrespective of the staining medium used, demonstrated a significant decrease in ΔE values over time.

• International Journal of Concrete Structures and Materials
• /
• v.7 no.3
• /
• pp.225-238
• /
• 2013

In this study, a two-layer feed-forward neural network was constructed and applied to determine a mapping associating mix design and testing factors of cement-nano silica (NS)-rice husk ash ternary blended concrete samples with their performance in conductance to the water absorption properties. To generate data for the neural network model (NNM), a total of 174 field cores from 58 different mixes at three ages were tested in the laboratory for each of percentage, velocity and coefficient of water absorption and mix volumetric properties. The significant factors (six items) that affect the permeability properties of ternary blended concrete were identified by experimental studies which were: (1) percentage of cement; (2) content of rice husk ash; (3) percentage of 15 nm of $SiO_2$ particles; (4) content of NS particles with average size of 80 nm; (5) effect of curing medium and (6) curing time. The mentioned significant factors were then used to define the domain of a neural network which was trained based on the Levenberg-Marquardt back propagation algorithm using Matlab software. Excellent agreement was observed between simulation and laboratory data. It is believed that the novel developed NNM with three outputs will be a useful tool in the study of the permeability properties of ternary blended concrete and its maintenance.

• Journal of Pharmaceutical Investigation
• /
• v.15 no.2
• /
• pp.53-62
• /
• 1985

Pivampicillin hydrochloride is a kind of broad spectrum antibiotics with bactericidal action, and is used in many countries, although it has bitter taste, unpleasant odour and side effects of irritating gastric mucosa, nausea, penicillin allergy, etc. For the improvement of such side effects of pivampicillin hydrochloride, microcapsules, with wall of ethylcellulose, have been prepared by coacervation method. The shape was observed through the scanning electron microscope, the release of the drug into an aqueous medium was studied and the effects of core: ethylcellulose ratio were interpreted as well as making sensory evaluation of taste and odour. There was decreasing trend in dissolution rate of the drug with the increase of core: ethylcellulose ratios, and the smaller microcapsules released their contents more rapidly. A linear relationship was established between the amount of ethylcellulose and the time for 60% release of the drug, and the release pattern was found to have similar characteristics to the release of the drug from an insoluble porous matrix. The release of the drug in the artificial intestinal fluids (pH 6.8) was found to be similar to that in water, while the release in the artificial gastric juice (pH 1.2) was slightly slower. Bioavailability of microcapsule was compared with that of pivampicillin hydrochloride in rabbits using serum concentration and urinary excretion measurements. Microcapsule gave showed slightly higher serum level than pivampicillin hydrochloride from 2 hours after administration, while no significant difference was observed in the accumulated urinary excretion rate between pivampicillin hydrochloride and microcapsule. The ulcer index of pivampicillin hydrochloride administered group was 2.6, and microcapsule administered group was 1.5, while control group was 0.8. Therefore it may be concluded that microencapsulation of pivampicillin hydrochloride is a useful pharmaceutical approach to protect the gastrointestinal tract from being injured by direct contact of pivampicillin hydrochloride without any significant difference of bioavailability.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.473-477
• /
• 2007

Industry for artificial joint is a complex one based on various technologies, including mechanics, biotechnology, material engineering, and medicine which are connected closely. This industry has been already known to a higher value-added business, and as going into an aging society, is expected a market growth. Also, it is a knowledge based component industry and each components assembled into product is almost all import items. This characteristics made many small and medium and venture enterprises participate in this area. For these reasons, it is needed a government's promotion. In this study, commercialization environment was analyzed and then commercialization items and strategies was figured out. Firstly, three factors for need, environment, technology were analyzed and then growth drivers growth restraints were provided. Secondly, items and strategies for commercialization were analyzed based on needs and trends of technology. Commercialization opportunities are expected to be created based on strategies following as; building a integrated technology development system, making a public opinion, strengthening a marketing, entering into niche market, B2B strategies etc.

• YAKHAK HOEJI
• /
• v.38 no.2
• /
• pp.123-130
• /
• 1994

Physicochemical properties and hydrolysis kinetics of new some oral cephalosporins were examined in buttered solution and human plasma or rat liver homogenate. The test cephalosporins were 7-[(Z)-2-(2-aminothiazole-4-yl)-2- methoxyiminoacetamido]-3-[4-(2-pyridyl)piperazinyl] thiocarbonylthhiomethyl-3-cephem-4-carboxylic acid (CEN1), 7-[(Z)-2-(2-aminoth iazole-4-yl)-2-methoxyiminoacetamido]-3-[4-(2-pyrimidyl)piperazinyl]th iocarbonylthiomethyl-3-cephem-4-carboxylic acid (CEN2), pivaloyloxymethyl-7-[ (Z)-2-(2-aminothiazole-4-yl)-2-methoxyiminoacetamido]-3-[4-(2-pyridyl)piperazi nyl]thiocarbonylthiomethy1-3-cephem-4-carboxylate (CEN1P), and pivaloyloxymethyl-7-[(Z)-2-(2-aminothiazole-4-yl)-2-methoxyiminoacetamido]-3-[ 4-(2-pyrimidyl)piperazinyl]thiocarbonyl-thiomethyl-3-cephem-4-carboxylate (CEN2P). The partition coefficient(Ko/w) of CEN1P, CEN2P were higher than those of CEN1, CEN2. The calculated pKa values of CEN1, CEN2, CEN1P, and CEN2P were 7.09, 7.75, 4.92, and 5.39, respectively. The hydrolysis of CEN1P and CEN2P were not depend on the composition of pH of the test medium except weak alkaline buffered solution (pH 8.00). CEN1 and CEN2 were very stable in pH 6.80 and 8.00 buffer solutions. CEN1P and CEN2P were rapidly deesterified to CEN1 and CEN2 in human plasma and in rat liver homogenate. Half-lives$(t_{1/2})$ of CEN1 and CEN2 were 3.49 and 4.93 hr in human plasma, 1.47 and 1.26 hr in rat liver homogenate, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.8
• /
• pp.3567-3582
• /
• 2020

Human activities are often affected by weather conditions. Automatic weather recognition is meaningful to traffic alerting, driving assistance, and intelligent traffic. With the boost of deep learning and AI, deep convolutional neural networks (CNN) are utilized to identify weather situations. In this paper, a three-channel convolutional neural network (3C-CNN) model is proposed on the basis of ResNet50.The model extracts global weather features from the whole image through the ResNet50 branch, and extracts the sky and ground features from the top and bottom regions by two CNN5 branches. Then the global features and the local features are merged by the Concat function. Finally, the weather image is classified by Softmax classifier and the identification result is output. In addition, a medium-scale dataset containing 6,185 outdoor weather images named WeatherDataset-6 is established. 3C-CNN is used to train and test both on the Two-class Weather Images and WeatherDataset-6. The experimental results show that 3C-CNN achieves best on both datasets, with the average recognition accuracy up to 94.35% and 95.81% respectively, which is superior to other classic convolutional neural networks such as AlexNet, VGG16, and ResNet50. It is prospected that our method can also work well for images taken at night with further improvement.