• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1740-1742
• /
• 1997

The trend of partial discharges(PD) magnitude which occured in a artificial void at cable joint is investigated as the function of a time. The results have shown that more than 500pC could be sustained for the considerable duration so the efficiency of monitoring a PD magnitude for diagnosing cable joints is confirmed. The other defects at cable joints are now under the same test, we can get the experimental data sooner or later.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.11
• /
• pp.468-475
• /
• 2006

This paper reviews the energy characteristics of oil filled cables in transient state such as grounding fault and lightning surge. Artificial grounding fault test was firstly performed in 2003 for the analysis of arc voltage and breakdown energy according to the fault current. In this paper, energy of OF cable is variously analysed at joint box based on the actual test. Then more various conditions such as installation types, section lengths and CCPU(Cable Covering Protection Unit) connection types are applied for the simulation using EMTP when the single line to ground fault and direct lightning stroke are occurred on actual underground power cable systems and combined power cable systems, respectively. Finally, the energy by the length of crossbonded lead and grounding lead as well as fault lasting time is also calculated using EMTP simulation.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1511-1512
• /
• 2006

In this paper, we measured PD signals from artificial surface defects and corona discharges under laboratory circumstances like the fields using both HFCT-sensor and UHF-sensor for MV grade XLPE cable with AMP, spectrum analyzer and oscilloscope. Also, detected signals were analyzed via PRPDA system in this paper. As a result, in this case of HFCT-sensor, the amount of background noise are larger than as compared to UHF-sensor. There is needed some hardware or software or software algorithm removing background noise effectively for diagnosis the underground power transmission cable in the case of HFCT-sensor.

• Electronics and Telecommunications Trends
• /
• v.37 no.5
• /
• pp.1-10
• /
• 2022

Digital trade rules are crucial in supporting the digital economy as the rules effectively reduce unnecessary trade barriers. This study introduces various approaches that major countries take regarding digital trade policies and rules. Comprehensive and Progressive Agreement for Trans-Pacific Partnership has introduced comprehensive rules on e-commerce, including binding articles on the free flow of information, location of computing facilities, and source code. More recent e-commerce provisions or digital trade agreements cover wider range of issues, from cyber security, artificial intelligence, and data innovation to electronic invoicing and payments. Multilateral negotiations on digital trade rules, including the World Trade Organization E-commerce Joint Statement Initiatives and Indo-Pacific Economic Framework, are in progress. Thus, countries involved are expected to respond to new digital trade issues with long-term strategies considering domestic policy objectives.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.1048-1051
• /
• 2020

본 논문에서는 사람의 손에 관한 개별적으로 분리되어 진행되고 있는 손 위치 추정, 손 자세 추정, 손 동작 인식 작업을 통합하는 Faster-RCNN기반의 프레임워크를 제안하였다. 제안된 프레임워크에서는 RGB 동영상을 입력으로 하여, 먼저 손 위치에 대한 박스를 생성하고, 생성된 박스 정보를 기반으로 손 자세와 동작을 인식하도록 한다. 손 위치, 손 자세, 손 동작에 대한 정답을 동시에 모두 가지는 데이터셋이 존재하지 않기 때문에 Egohands, FPHA 데이터를 동시에 효과적으로 사용하는 방안을 제안하였으며 제안된 프레임워크를 FPHA데이터에 평가하였다., 손 위치 추정 정확도는 mAP 90.3을 기록했고, 손 동작 인식은 FPHA의 정답을 사용한 정확도에 근접한 70.6%를 기록하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.107-108
• /
• 2023

본 논문에서는 교량의 변위를 IoT 장치를 이용하여 실시간 측정하고 추출된 데이터를 이용하여 교량의 이상징후를 AI 기반으로 진단 및 모니터링 하는 방법을 제안한다. AI 모델 학습 학습을 위해서 비정상 상태의 교량이 필요하지만, 실제 교량에 인위적으로 비정상 상태를 만들 수 없으므로, 탄성 받침을 이용하여 모의 교량을 제작하였다. 탄성 받침을 이용하여 제작에 반영 및 모의교량에 적합한 모의 차량도 제작하여 정상적 데이터와 비정상적 데이터를 수집하였다. 수집된 데이터를 전처리 과정을 통해 AI 분석을 통해 교량의 이상 징후를 진단 및 모니터링하였으며, 제안 모델을 실험한 결과 96.7%의 정확도가 도출되었다.

• ETRI Journal
• /
• v.45 no.6
• /
• pp.929-938
• /
• 2023

The detection of all the symbols transmitted simultaneously in multiuser systems using limited wireless resources is challenging. Traditional model-based methods show high performance with perfect channel state information (CSI); however, severe performance degradation will occur if perfect CSI cannot be acquired. In contrast, data-driven methods perform slightly worse than model-based methods in terms of symbol error ratio performance in perfect CSI states; however, they are also able to overcome extreme performance degradation in imperfect CSI states. This study proposes a novel deep learning-based method by improving a state-of-the-art data-driven technique called deep soft interference cancellation (DSIC). The enhanced DSIC (EDSIC) method detects multiuser symbols in a fully sequential manner and uses an efficient neural network structure to ensure high performance. Additionally, error-propagation mitigation techniques are used to ensure robustness against channel uncertainty. The EDSIC guarantees a performance that is very close to the optimal performance of the existing model-based methods in perfect CSI environments and the best performance in imperfect CSI environments.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.6
• /
• pp.497-503
• /
• 2010

Purpose: The purpose of this study is to induce artificial arthritis on rabbit TMJ by injecting collagenase. Materials and Methods: An experimental animal model of arthritis induced by surgical method or intraarticular injection of chemical agent like LDH, papain, ketorolac. Surgical method is complex and needs a long time in inducing arthritis. Intra-articular injection of chemical agent like LDH, papain, ketorolac is simple. But chemical agent like LDH, papain, ketololac needs multiple injections to induce arthritis and mechanism inducing arthritis was known. Collagenase destroys helical domain of type II collagen in extracellular matrix produced by chondrocyte and then induces arthritis. We injected collagenase (0.5, 1.0, 2.0 mg) into the temporomandibular joint of rabbit. In the control group saline was intra-articularly injected. The condylar cartilage, disk and synovia were histologically examined at 1, 2, 4, 6 weeks after the initiation of collagenase injections. Results: Four weeks after injection of 2.0 mg collagenase, we could see histologic change like arthritis. In other groups, we couldn't see arthritis-like change. Conclusion: In our study, we produce arthritis on temporomandibular joint of rabbit by using injection of collagenase in temporomandibular joint of rabbit. And this experimental osteoarthritis is a useful animal model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.5
• /
• pp.467-471
• /
• 2015

Thus far, solders used in electronics remain lead-based. Pb-free solutions in electronic components and systems are receiving increased attention in the semiconductor and electronics industries. Pb-free materials currently in used are Sn-37Pb, Sn-4Ag and Sn-4Ag-0.5Cu/Ni plate joints. In this study, solder alloys were used at high temperatures for artificial aging processing that was performed at $150^{\circ}C$ for 0hr, 100hr, 200hr, 400hr, 600hr and 1000hr. The SP test was conducted at $30^{\circ}C$ and $50^{\circ}C$. As a result, the maximum shear strength of all the specimens decreased with the increase in artificial aging time and temperature of the SP test. In addition, Pb-free solders showed higher total fracture energy compared with Sn-37Pb at high temperatures. The mechanical properties of Sn-4Ag-0.5Cu solder/Ni plate joints remained in excellent conditions in electronic parking systems at high temperatures.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.1
• /
• pp.59-62
• /
• 2004

To know what happens to the internal structure of emulsions under high shear flow is very important for cosmetic product development because it is highly relevant to the physical degradation of emulsions during the application upon the skin. Here, in order to investigate the response of emulsions against the external shear forces, we designed a new device, .JELLI$^{TM}$ (Joint Electro-rheometer for Liquid-Liquid Inversion) chip, for the measurement of electrical and rheological properties of emulsions under shear flow. By using this device, we examined the real-time changes in conductivities of oil-in-water (O/W) and water-in-oil (W/O) emulsions on the artificial skin during large deformation under shear flow. In this study, O/W and W/O emulsions having various volumes were prepared. After emulsions were homogeneously applied on the artificial skin, the electrical resistance and viscosity changes were monitored under steady shear flow. In case of O/W emulsions, the resistance increased as a function of time. The resistance showed more dramatic increase as the increase of the internal oil phase. It was also found that the viscosity change was proportional to the resistance variation. This phenomenon might be caused by decreased resisting forces against the shear flow because of the breakdown of the internal phase.the internal phase.